← All packaging guidesNavy magnetic closure box open to show the cream interior, beside a closed box

Custom Box Finishes: What to Test Before Approving a Proof

Test foil, embossing, varnish, lamination and spot UV on the intended stock and folds before approving a custom box.

Published Updated by Custom Boxes Editorial TeamPrinting and artwork

Choose a finish for the surface the customer will actually see and touch. On a parcel mailer the outside may be covered by a label or rubbed during handling. The inside lid can be a better location for a delicate detail.

Match the finish to the artwork

Finish Useful for Check on the sample
Foil stamping A small logo or high-contrast metallic area Fine lines, small counters, edge lifting and rub marks
Emboss or deboss A raised or recessed logo Pressure marks on the reverse and clearance behind the panel
Spot UV Selective gloss over a flat print area Alignment to the printed image and cracking near folds
Varnish A surface sheen or selected abrasion protection Drying, rub behavior and interaction with labels or glue
Lamination A uniform feel or additional surface protection Fold behavior, adhesion and the effect on recycling locally

A hinged lid box may need its foil kept clear of the moving hinge. A black corrugated mailer needs a fold and rub test, because marks can show strongly on a dark flood. A shoulder-neck rigid case needs a lid fit test once the wrap and any laminate are applied.

Separate artwork and finish layers

Supply the artwork on the agreed dieline and mark each special finish on its own layer. Identify the intended front and opening direction. Keep codes and small type clear of decorative areas when scanning and reading matter. Have the production team confirm safe distances from cut, crease and glue lines for that structure.

Check a closed and loaded box

Inspect the proof under neutral light and then under the display lighting if possible. Fold and open it several times, rub the usual contact points, and apply the shipping label or variable mark. On a rigid box, check that the finished cover, insert and lid still fit. Record the approved stock, finish area and artwork version for repeat orders.

Start with the artwork preparation guide if the dieline is ready, or use the sample pack for board and print to compare finishes.

Testing box finishes on a proof is one of our packaging guides fromCustom Boxes, written to help you specify custom hinged lid boxes and every other format in our range of custom box types.

Copied to clipboard!