
CBD and Cannabis Packaging
Specify printed outer cartons for sealed products by starting with the primary container, sales market and approved artwork. A bottle, tube and closed device have different support points and information requirements.
Cannabis and CBD packaging carries more required text per square inch than almost any other category, and the rules change from state to state. The outer carton has to hold that text legibly, present the brand on a crowded dispensary shelf, and protect a glass bottle, a tube or a sealed device on its way there.
Most brands start with a folding carton around each unit and add a display or multipack carton for the counter. Plan the artwork per state and per product from the start, so one structure can carry several approved versions.

Recommended packaging styles
Explore the box styles in this range, then choose the dimensions, board and finish for your product.
Buying guide
Choose the carton around the sealed container
Tincture bottles need a measured shoulder and room for the capped dropper. Tall tubes often need a shallow end stop because the cap sets the outer width. A divided carton can keep sealed units apart in a multipack.
Send the finished container, its maximum weight and the position of any tamper seal. Test the approved position with the carton closed, tilted and opened by hand.
Reserve space before finalizing the artwork
Create separate artwork files for markets or SKUs with different approved wording. Keep variable batch and date areas off glued panels and give small type a background with sufficient contrast.
Have the product owner verify current packaging requirements for each intended market. An ordinary paperboard closure does not establish child resistance. Obtain and specify the separately tested closure where required.
Plan one structure for several product lines
Brands that sell tinctures, pre-rolls and cartridges often use one carton style in three or four sizes rather than a different construction for each product. The shelf looks consistent, artwork templates are reused, and sizes can be printed in one run.
Keep the front panel for the brand and product name, and give the back and side panels to required text. Leave a blank area for batch, test and date information that is applied after printing.
Check closures and inserts with the real container
A carton made of ordinary paperboard is not a child-resistant closure. If your product needs one, the tested closure is part of the primary container or a separately certified package; the printed carton sits around it.
Order one sample carton and test it with the filled container: open it, close it, tip it upside down and pass it across a counter. Adjust the insert before ordering the full run.
Guides for this range
CBD and Cannabis Packaging is one part of the range made by Custom Boxes. Compare every format on the custom box types page, or browse packaging by industry.








