Ecommerce Mailers

Custom Kraft Mailer Boxes

A kraft mailer box is a die-cut corrugated carton with a brown kraft liner, hinged lid and interlocking wings. It ships flat, closes by hand and leaves the natural fiber color visible around the print.

Custom Kraft Mailer Boxes price by quantity

From $0.89 per box

Price for 1 box at 6 × 4 × 2 in (152 × 102 × 51 mm), in Kraft E-flute, with full-color digital print on the outside.

QuantityPer boxTotal
1$0.89$0.89
100$0.89$89.00
250$0.89$222.50
500$0.89$445.00
1,000$0.89$890.00
2,500$0.89$2,225.00
5,000$0.89$4,450.00

What are custom kraft mailer boxes?

Brown corrugated mailers for clothing, subscription packs and refill kits, with print tested against the actual kraft liner.

Brown board changes how ink looks. Transparent inks combine with the liner color, so a blue or pastel picked on a white screen can print much darker. Use a dark spot color for a straightforward logo or compare an opaque white underprint with a white-lined mailer when exact color matters.

Our custom kraft mailer boxes are part of the ecommerce packaging range alongside our custom mailer boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Kraft Mailer Boxes styles and specifications

The standard construction for custom kraft mailer boxes is the roll end tuck top mailer (FEFCO 0427). A one-piece corrugated mailer with rolled double walls and a tuck lid; no tape needed. It suits ecommerce, subscriptions and gift shipping.

Brown outside and inside

Keep both faces natural for a one-color design.

Brown outside with a white inner liner

Keep the outside understated and print lighter colors inside the lid.

Custom Kraft Mailer Boxes specifications

Box styleRoll end tuck top mailer (FEFCO 0427)
Strength grades32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxBlack spot ink, Opaque white ink where suitable, Inside lid print, Matte varnish
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval; rush 5–7 business days
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

Kraft E-flute
Thin fluting for a crisp fold and a small to medium pack.
Kraft B-flute
A deeper wall for heavier fills and more space between the product and the outside face.

Printing and finishing options

  • Black spot ink
  • Opaque white ink where suitable
  • Inside lid print
  • Matte varnish

Who orders custom kraft mailer boxes

  • Apparel brands sending a folded garment
  • Refill programs replacing plain parcel cartons

Popular sizes for custom kraft mailer boxes

The size buyers ask for most is 6 × 4 × 2 in (152 × 102 × 51 mm), used for jewelry wrapped in a protective insert. The smallest size listed here is 6 × 4 × 2 in (152 × 102 × 51 mm) (jewelry wrapped in a protective insert) and the largest is 10 × 8 × 3 in (254 × 203 × 76 mm) (A folded shirt with a little room for a paper wrap). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
6 × 4 × 2 in (152 × 102 × 51 mm)Jewelry wrapped in a protective insert
10 × 8 × 3 in (254 × 203 × 76 mm)A folded shirt with a little room for a paper wrap
4.75 × 3.25 × 1.5 in (121 × 83 × 38 mm)Compact size: jewelry wrapped in a protective insert, travel or sample size
7.5 × 5 × 2.5 in (191 × 127 × 64 mm)Larger size: jewelry wrapped in a protective insert with an insert or extra room

Review the print against the actual brown liner

Put a full-size proof next to the kraft liner and compare the areas with small type and fine strokes. A pale accent may need more contrast on the real board. Decide which part of the design has to read most clearly. A deep ink can work well for a simple mark, while a light detailed image may need a different surface.

Fold the sample and see what the artwork looks like on the rolled sides and the front tuck. Natural board can vary in tone, so look at more than one piece if a match matters. Leave a plain place for the shipping label. If you need a light name to stay crisp on the front, check it in the same light where the parcel will be opened.

Check the fit with the wrapped order inside

For clothing, fold the garment with the tissue and any sticker already in place. A thick seam or folded cuff can sit near the hinge even when the box has room in the center. Close the sample and watch whether the tuck lines up without pressing down. Test a refill kit with its cap or pump protected before agreeing to share the same mailer.

A short insert can keep a small order from sliding under a rolled side. Try loading it into a sample with the printed panel facing the way you want. If the insert must go in before the products, give staff a simple way to tell which end is the front. Keep the tray grip clear when the lid is fully open.

Use the liner and inside print as part of the opening

Open the loaded sample on a table and see whether the product name is visible against the brown liner. A printed inside message can work on the lid if it stays above the top of the tray. A separate card can sit lower if you want to change the message between runs. Check both positions with the lid open at the angle the customer will use.

If you add an interior label, choose an area that stays flat after the mailer is folded. A seal at the hinge can break when the customer lifts the lid. Put any opening cue near the front grip and test it with the ship label applied. Record the board, finish and order layout with the approved sample for later runs.

How to choose custom kraft mailer boxes

  1. Check the darkest artwork details

    Make sure small dark type stays readable over the natural flecks.

  2. Allow for the doubled sidewalls

    Measure the usable width between the folded wings with the product loaded.

See what a box will cost to ship with the dimensional weight calculator. Unfamiliar terms on a quote? The packaging glossary explains them in plain English.

Custom Kraft Mailer Boxes pricing, production and delivery

Pricing for custom kraft mailer boxes starts at $0.89 per box for 1 box at 6 × 4 × 2 in (152 × 102 × 51 mm), in Kraft E-flute, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom kraft mailer boxes takes 8–12 business days once the proof is approved. If the date is tight, rush production takes 5–7 business days on most corrugated mailer and shipping boxes. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom kraft mailer boxes.

Options and guides for custom kraft mailer boxes

FAQ

Custom Kraft Mailer Boxes FAQ

Can I print white on brown kraft?

Ask for an opaque white ink sample. If white covers most of the design, a white liner may be the better specification.

Does a kraft liner determine strength?

No. Confirm the complete board construction, packed weight and transit route.

What is the minimum order for custom kraft mailer boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.

What are custom kraft mailer boxes made from?

Kraft E-flute and Kraft B-flute. Thin fluting for a crisp fold and a small to medium pack. The board is confirmed on your proof before production.

What sizes do custom kraft mailer boxes come in?

Every box is cut to your inside dimensions. Popular sizes are 6 × 4 × 2 in (152 × 102 × 51 mm) for jewelry wrapped in a protective insert and 10 × 8 × 3 in (254 × 203 × 76 mm) for A folded shirt with a little room for a paper wrap.
Copied to clipboard!