
ECT vs Burst Strength: How Corrugated Box Strength Is Rated
Edge crush test (ECT) and burst (Mullen) test explained: what each measures, how to read the box certificate, and which rating to specify for your shipments.
Corrugated boxes are rated for strength in two ways: the edge crush test (ECT), which measures how much load the board can carry on its edge before it crushes, and the burst test, also called the Mullen test, which measures how much pressure it takes to punch through the board’s face. ECT predicts stacking strength; burst predicts resistance to rough handling and punctures.
What the edge crush test measures
In an ECT test, a small strip of board is stood on its edge and pressed until it buckles. The result is given in pounds per linear inch, so a 32 ECT board withstands 32 pounds of force on each inch of edge. Because a box’s corners and walls carry stacked weight on their edges, ECT is the best predictor of how well a box survives being stacked in a warehouse, on a pallet or in a truck.
What the burst test measures
In a burst test, a rubber diaphragm pushes against the face of the board until it ruptures. The result is given in pounds per square inch, such as 200 lb burst. It reflects the strength of the liners and how well the box resists punctures, impacts and being overfilled.
Which rating should you use?
For most modern parcel and pallet shipping, ECT is the more useful number, because boxes fail far more often by crushing under stacked loads than by bursting. Lighter, higher-performance liners also mean a box can achieve a good ECT with less material.
Burst ratings still matter for heavy, dense or sharp products that could push through the face of the box, and some carriers’ rules refer to either measure.
| Typical grade | ECT | Equivalent burst | Packed weight (guide) |
|---|---|---|---|
| Light single-wall | 29 ECT | 175 lb | Up to about 15 kg |
| Standard single-wall | 32 ECT | 200 lb | Up to about 20 kg |
| Heavy single-wall | 44 ECT | 275 lb | Up to about 30 kg |
| Double-wall | 48–61 ECT | 275–350 lb | Heavy, fragile or export loads |
The equivalences are approximate; the two tests measure different things, so a board can score well on one and modestly on the other.
The box maker’s certificate
Many corrugated boxes carry a round stamp on the bottom flap, the box maker’s certificate. It lists the test used (edge crush or burst), the rating, the size limit and the gross weight limit for that construction. It is the quickest way to check what an existing box is rated for.
Choosing your grade
Start with your packed weight and how the box travels. Single parcels through a carrier network rarely need more than 32 ECT; boxes stacked on pallets, stored for long periods or shipped in humid conditions benefit from 44 ECT or double-wall. Our guide to corrugated flute types covers how flute profile affects strength and print.
ECT vs Burst Strength is one of our packaging guides fromCustom Boxes, written to help you specify custom corrugated boxes and every other format in our range of custom box types.



