
How to Measure a Box: Length, Width and Depth Explained
How to measure a box correctly: which side is length, width and depth, inside vs outside dimensions, and how much clearance to leave around your product.
To measure a box, record three dimensions in this order: length, width and depth. Length is the longest side of the opening, width is the shorter side of the opening, and depth is the height from the opening to the base. For custom boxes, always give inside dimensions, because they describe the space your product actually has.
Length, width and depth
Look down into the open box. The opening is a rectangle: its longer side is the length and its shorter side is the width. The distance from the opening down to the floor of the box is the depth, sometimes called the height.
The order matters. A 12 x 9 x 6 in box and a 12 x 6 x 9 in box hold the same volume but open differently: the first has a 12 x 9 in opening and is 6 in deep, the second has a narrow 12 x 6 in opening and is 9 in deep.
Inside vs outside dimensions
Board has thickness, so the outside of a box is larger than the inside. On a single-wall corrugated box the difference is roughly 0.25 in on each dimension; on double-wall it is more.
- Inside dimensions are what manufacturers use to make a box fit a product. Use them when ordering.
- Outside dimensions are what carriers use to calculate dimensional weight and what pallets and shelves must fit.
How to measure your product
- Lay the product in the position it will travel in.
- Measure the longest side, the next longest and the shortest, at the widest points, including caps, handles, pumps and existing packaging.
- Add clearance to each side: about 0.25 in for snug items, 0.5 in for light padding, and 1 in or more for fragile items that need cushioning.
- The result is the minimum inside size of your box.
Our box size finder does these steps for you and suggests the smallest standard size that fits.
Common mistakes
- Measuring the outside of an old box and ordering it as an inside size, which gives a box that is too big.
- Forgetting the lid or flaps: on mailers and folding cartons, the closure takes space inside the top of the box.
- Swapping width and depth, which changes how the box opens and how products are packed.
When to send a sample
For irregular shapes, glass or products with inserts, sending a physical sample is the fastest way to a box that fits first time. A plain structural sample confirms the fit before printing.
How to Measure a Box is one of our packaging guides fromCustom Boxes, written to help you specify custom corrugated boxes and every other format in our range of custom box types.



