
Measure Usable Space in Tins, Tubes and Specialty Boxes
Measure rolled edges, lid overlap, tube plugs and drawer clearances using the real packed item before approving a specialty box.
Measure usable space after the lid, insert or tray is installed. A specialty box can have a generous outside size while the opening, taper or rolled edges reduce the room available to load and remove the item.
Identify the narrowest point
In printed metal tins, check the opening at the rolled edge and the position where the lid meets the base. Rounded corners can leave less usable space for a rectangular insert. Compare fit with the actual item and any inner wrapper.
For paperboard tubes, measure the internal diameter and depth with the lid plug in place. A taller plug or inset base can take up space. Make sure the contents can be removed without turning the whole tube upside down.
In a slide-out drawer box, check the tray both empty and filled. The sides can bow under load, and a finish may add enough thickness to affect friction.
Check loading and opening with real parts
Measure the widest part of the item and check the path it takes through the opening. Fit a physical prototype and try closing it from the intended angle. Add a finger cut or lift tab where people need help removing a close-fitting item.
For shaped cartons, support the product before finalizing the outline. A die-cut carton with an unusual profile may need additional folds or a separate transit outer to withstand handling.
Review closure fit, pressure points and the proposed transit pack with the tin and specialty box collection as the starting point.
Measuring specialty box clearance is one of our packaging guides fromCustom Boxes, written to help you specify custom tin boxes and every other format in our range of custom box types.