Open fry scoop
A sloped front gives direct access at the counter.

Food and Takeaway Packaging
A French fry box is a tapered paperboard container for a measured portion of chips or fries. A raised back can make scooping and carrying easier.
From $0.55 per box
Price for 1 box at 3 × 1.5 × 4 in (76 × 38 × 102 mm), in Folding food board, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $0.55 | $0.55 |
| 100 | $0.55 | $55.00 |
| 250 | $0.55 | $137.50 |
| 500 | $0.55 | $275.00 |
| 1,000 | $0.55 | $550.00 |
| 2,500 | $0.55 | $1,375.00 |
| 5,000 | $0.55 | $2,750.00 |
Open-top fry cartons and lidded chip boxes sized to the scoop, portion and serving method.
Open scoops release steam and suit counter service. Closed chip boxes retain the portion during delivery, but a hot fill can soften both the fries and the board. Choose a vent layout and barrier after testing the filled pack.
Our custom french fry boxes are part of the food and beverage packaging range alongside our custom bakery boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom french fry boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
A sloped front gives direct access at the counter.
A lidded pack holds loose fries during a delivery route.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Exterior branding, Grease-resistant inside where specified, Vent slots |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 8–12 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 3 × 1.5 × 4 in (76 × 38 × 102 mm), used for A small open side portion. The smallest size listed here is 3 × 1.5 × 4 in (76 × 38 × 102 mm) (A small open side portion) and the largest is 5 × 3 × 2 in (127 × 76 × 51 mm) (A wider closed portion). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 3 × 1.5 × 4 in (76 × 38 × 102 mm) | A small open side portion |
| 5 × 3 × 2 in (127 × 76 × 51 mm) | A wider closed portion |
| 2.5 × 1.25 × 3.25 in (64 × 32 × 83 mm) | Compact size: A small open side portion, travel or sample size |
| 3.75 × 2 × 5 in (95 × 51 × 127 mm) | Larger size: A small open side portion with an insert or extra room |
Take the scoop your staff use and fill an assembled carton at the actual station. Check whether the scoop can tip in without catching the sides. A short portion of wide fries can sit differently from a larger portion of thin fries. Use an inner liner unless the board has been confirmed suitable for direct food contact. Try the same portion again with the liner in place so you can see how much space it takes.
Keep the front edge low enough for a customer to reach the fries while the side walls hold the portion. Try gripping a full carton near the bottom and setting it down on a tray. If it tips, check the base shape and the way the liner folds underneath the food. A taller back wall can give the portion a place to rest without raising the whole opening.
When fries go beside a burger and a drink, the carton must fit among the other pieces without leaning. Check the arrangement in the bag or carry tray you actually use. If a lid is fitted, see whether a neighboring carton pushes it open or blocks a vent. After the usual hold, inspect the seams and the underside of the fry box while the whole meal is still packed.
A separate sauce cup may be easier to place beside the fries than on top of them. Put the sealed cup in the trial arrangement and see whether the customer can reach it without tipping the carton. If a divider is needed, leave space for a hand to grasp the cup. Check a full portion as well as a smaller order before agreeing on the width of the pack.
A tapered carton gives the widest print area near the top. A logo that starts too low can disappear behind the customer's hand or the side of a tray. Hold a filled sample as it would be handed over and look at the panel from the other side of the counter. Mark the areas staff touch and check where folds break up the design.
For a branded lid, keep the release tab easy to spot after a label or seal goes on. If you use a shared design across portion sizes, print a short size name where the same area stays visible on each. We print the text exactly as supplied. Have it reviewed before sending artwork, including the names staff use to distinguish portions.
Measure a normal and a generous serving with the same scoop.
Inspect seams and the underside after the usual service interval.
If your launch date is close, rush production shortens the production time on most corrugated formats. Want to feel the board and finishes first? Order a free sample pack before you commit.
Pricing for custom french fry boxes starts at $0.55 per box for 1 box at 3 × 1.5 × 4 in (76 × 38 × 102 mm), in Folding food board, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom french fry boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom french fry boxes.