← All packaging guidesKraft corrugated shipping box with a printed logo, open to show products packed in paper

How to Test a Shipping Box for Product Movement and Damage

Test the complete parcel pack for movement, pressure points, panel deflection and damage before approving a custom shipping box.

Published Updated by Custom Boxes Editorial TeamSizing and shipping

Test a shipping box as a complete pack, with the actual item, inserts, closures and labels. A stronger board can help with compression. If a sharp part moves into an outer wall or two pieces of glass touch, fix the restraint first.

Identify the likely failure

Movement. Rotate a filled test pack by hand. If the product slides or tips, find a better support point rather than filling every gap with loose material. For glassware shipping cartons, check the rim, foot and neighboring cells. For picture frame shipping cartons, keep the corners away from the outer corners and protect the broad faces from pressure.

Point load. Identify caps, metal edges, protruding controls and concentrated weight. A fitted pad can transfer load into a broader area. For heavy-duty shipping boxes, trial the intended bottom closure with the actual product and consider how operators lift it.

Compression. Recreate the intended stacking pattern and check whether boxes overhang a pallet or stack on unsupported centers. Condition the sample for the expected environment, since moisture and storage time can affect board behavior.

Check the packed dimensions

Record the exterior length, width and height, including bowing where it matters. Compare those figures with the carrier service and freight rules. Do this after fitting the insert, because it may change the depth needed to close the carton.

Use the right level of testing

An in-house packing trial can reveal poor fit, torn seams and inaccessible closures. When the item is fragile or failure has a high cost, use a testing plan appropriate to the product, route and distribution conditions. Do not treat a single drop in the office as a carrier approval.

Record the approved board, insert position, product weight, pack orientation and closure method. Link these requirements to the order for your custom shipping carton so the production sample can be checked against them.

Testing a shipping box for damage is one of our packaging guides fromCustom Boxes, written to help you specify custom glassware boxes and every other format in our range of custom box types.

Copied to clipboard!