Shipping and Moving Boxes

Custom Heavy-Duty Shipping Boxes

A heavy-duty shipping box is a corrugated carton selected around the assembled pack’s load, handling and stacking requirements. Board grade, flap coverage, corner geometry and internal supports work together to carry the shipment.

Custom Heavy-Duty Shipping Boxes price by quantity

From $1.59 per box

Price for 1 box at 14 × 10 × 8 in (356 × 254 × 203 mm), in High-strength single-wall, with full-color digital print on the outside.

QuantityPer boxTotal
1$1.59$1.59
100$1.59$159.00
250$1.59$397.50
500$1.59$795.00
1,000$1.59$1,590.00
2,500$1.59$3,975.00
5,000$1.59$7,950.00

What are custom heavy-duty shipping boxes?

Engineered shippers for dense machinery parts, stacked cartons and loads that can puncture ordinary cases.

Compression failure and puncture failure need different fixes. A strong outer board may still fail if a hard part rests against one panel. Restrain the part first, then select board grade and bottom closure for the expected drops, stack pressure and humidity.

Our custom heavy-duty shipping boxes are part of the shipping and ecommerce boxes range alongside our custom shipping boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Heavy-Duty Shipping Boxes styles and specifications

The standard construction for custom heavy-duty shipping boxes is the regular slotted container (FEFCO 0201). The standard shipping carton: four flaps top and bottom that meet in the middle, closed with tape. It suits shipping, storage and case packs.

Full-overlap flaps

Overlap gives the top and bottom two full layers where abrasion or impact is likely.

Slotted case with corner supports

Use fitted corrugated pads or posts to shift the load away from vulnerable edges.

Custom Heavy-Duty Shipping Boxes specifications

Box styleRegular slotted container (FEFCO 0201)
Strength grades32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFlexographic spot print, Orientation arrows, Handling and stacking marks
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval; rush 5–7 business days
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

High-strength single-wall
An option for a dense item in a compact carton with well-supported panels.
Double-wall corrugated
More wall depth for larger cases or demanding routes, pending packed tests.

Printing and finishing options

  • Flexographic spot print
  • Orientation arrows
  • Handling and stacking marks

Who orders custom heavy-duty shipping boxes

  • Industrial parts suppliers
  • Distribution teams handling heavy stock in mixed pallet loads

Popular sizes for custom heavy-duty shipping boxes

The size buyers ask for most is 14 × 10 × 8 in (356 × 254 × 203 mm), used for compact hardware held in corrugated blocks. The smallest size listed here is 14 × 10 × 8 in (356 × 254 × 203 mm) (compact hardware held in corrugated blocks) and the largest is 24 × 16 × 14 in (610 × 406 × 356 mm) (bulk components packed with corner supports). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
14 × 10 × 8 in (356 × 254 × 203 mm)Compact hardware held in corrugated blocks
24 × 16 × 14 in (610 × 406 × 356 mm)Bulk components packed with corner supports
11.25 × 8 × 6.5 in (286 × 203 × 165 mm)Compact size: compact hardware held in corrugated blocks, travel or sample size
17.5 × 12.5 × 10 in (445 × 318 × 254 mm)Larger size: compact hardware held in corrugated blocks with an insert or extra room

Keep dense parts from bearing on a single panel

Lay the part on its intended supports and note where it is heaviest. A flange or a projecting shaft can come close to a side wall even when the main body has space. Give those points clearance and place the support beneath a part that can carry the load. Check the full pack with any fasteners or loose hardware already boxed.

If the carton holds several parts, use a divider that keeps each one from reaching the next. Test the packed sample after turning it in the way it may be handled. Inspect the liner where the supports meet the carton and note any place a hard part has left a mark.

Plan the closure for the people who use it

Assemble a sample at the packing station and try the actual closure method. See whether staff can fold and secure the flaps without pressing on a projecting part. A carton that stays square when empty may need a different packing order once the load is inside. Leave the closure area clear of handles and labels.

Check how the receiver will remove the load. A tall outer wall can make a supported part hard to grasp. Consider how a pad or top layer comes out and where the part can be lifted from. Try the sequence with the actual people and equipment that handle it.

Review how the packed carton sits in storage

Put the sample in the position it will occupy during staging. Look at the base and corners with the intended stack or neighbors beside it. Record the orientation and any limits supplied for the specific pack. Keep the identifier on a face staff can read without moving other cartons.

Save the approved support arrangement with the board and closure specifications. A new part with the same overall dimensions may have a different balance or a sharper corner. Repeat the fit check when that changes so the outer carton is still matched to the load.

How to choose custom heavy-duty shipping boxes

  1. Confirm closure method

    Match tape or staples to the load, packing process and unpacking procedure.

  2. Review any lift points

    A handhold removes material from the panel. Check whether it needs reinforcement or should be omitted.

Want to feel the board and finishes first? Order a free sample pack before you commit. Still deciding? The custom box FAQ answers the questions buyers ask most before ordering.

Custom Heavy-Duty Shipping Boxes pricing, production and delivery

Pricing for custom heavy-duty shipping boxes starts at $1.59 per box for 1 box at 14 × 10 × 8 in (356 × 254 × 203 mm), in High-strength single-wall, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom heavy-duty shipping boxes takes 8–12 business days once the proof is approved. If the date is tight, rush production takes 5–7 business days on most corrugated mailer and shipping boxes. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom heavy-duty shipping boxes.

Options and guides for custom heavy-duty shipping boxes

FAQ

Custom Heavy-Duty Shipping Boxes FAQ

What is the weight limit?

There is no single limit across all sizes and board grades. Quote the packed weight, stack height and shipping route so a sample can be specified.

Should every heavy box use double-wall?

Double-wall often helps. A compact, well-supported single-wall pack may work if verified against the same handling conditions.

What is the minimum order for custom heavy-duty shipping boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.

What are custom heavy-duty shipping boxes made from?

High-strength single-wall and Double-wall corrugated. An option for a dense item in a compact carton with well-supported panels. The board is confirmed on your proof before production.

What sizes do custom heavy-duty shipping boxes come in?

Every box is cut to your inside dimensions. Popular sizes are 14 × 10 × 8 in (356 × 254 × 203 mm) for compact hardware held in corrugated blocks and 24 × 16 × 14 in (610 × 406 × 356 mm) for bulk components packed with corner supports.
Copied to clipboard!