Retail Box Structures

Custom Coffee Filter Boxes

A coffee filter box is made to fit a nested stack of coffee filter papers. One construction option is a square tuck carton with a wide opening.

Custom Coffee Filter Boxes price by quantity

From $0.79 per box

Price for 1 box at 5 × 5 × 2 in (127 × 127 × 51 mm), in Printed folding paperboard, with full-color digital print on the outside.

QuantityPer boxTotal
1$0.79$0.79
100$0.79$79.00
250$0.79$197.50
500$0.79$395.00
1,000$0.79$790.00
2,500$0.79$1,975.00
5,000$0.79$3,950.00

What are custom coffee filter boxes?

Custom printed boxes sized for a nested stack of coffee filter papers.

Measure the widest part of the stack without flattening the rim.

Coffee filter boxes hold a nested stack of paper filters, and the box's job is to keep that stack round, flat and clean until the last filter. A square tuck carton with a wide opening lets one filter be taken at a time without crumpling the next. Coffee roasters and cafes sell filters under their own brand next to their beans, so the carton often matches the coffee bags in color and type. The front shows the filter size, shape and count, and the side panels are a good place for brewing tips such as grind size and water temperature. Cone filters and flat-bottom filters stack differently, so each needs its own box size.

Our custom coffee filter boxes are part of the retail and shelf packaging range alongside our custom product boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Coffee Filter Boxes styles and specifications

The standard construction for custom coffee filter boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.

Square tuck carton with a wide opening

Measure the widest part of the stack without flattening the rim.

Custom Coffee Filter Boxes specifications

Box styleReverse tuck end (RTE)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFull-color exterior print, Matte or gloss finish where compatible with the board and folds
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

Printed folding paperboard
Select board stiffness for the packed item and test the actual crease and flap.

Printing and finishing options

  • Full-color exterior print
  • Matte or gloss finish where compatible with the board and folds

Who orders custom coffee filter boxes

  • Coffee roasters and cafes
  • Brew equipment brands

Popular sizes for custom coffee filter boxes

Every order is cut to your inside dimensions, so treat these sizes as starting points.

Inside size (L × W × D)What fits
5 × 5 × 2 in (127 × 127 × 51 mm)Starting point for a nested stack of coffee filter papers. Confirm fit with a packed sample.
4 × 4 × 1.5 in (102 × 102 × 38 mm)Compact size: a nested stack of coffee filter papers, travel or sample size
6.25 × 6.25 × 2.5 in (159 × 159 × 64 mm)Larger size: a nested stack of coffee filter papers with an insert or extra room
5 × 5 × 4 in (127 × 127 × 102 mm)Double depth: a nested stack of coffee filter papers, two layers deep

Keep the rim round while the stack goes in

Nest the full set of filters in the shape they hold on the packing line. Basket filters can flare at the top, while a cone stack can be narrow at the base and broad at one side. Measure the widest part without squeezing the paper. Try fitting the stack through the open end with any protective wrap in place. The stack should not need to be pushed past a folded flap.

A tall stack can lean if the box has room at the bottom. Look for a shallow folded support that locates the stack without pressing on its rim. Trial the carton with the intended count and see what happens when it is set on its side. If the papers can shift into the closing tab, adjust the fit or the tab before you approve the sample.

Test how the stack is used near a brewer

Open the sample at the spot where a customer would keep it and remove a filter without lifting the entire stack. An opening that clears the rim may still be too narrow for a hand to reach a nearly empty carton. Try the last few filters as well as the first. A lowered front or a short cutout can improve access while the remaining stack stays supported.

If the box will close again, check the top after taking a filter out. A rim that springs up can get caught under the tuck as it closes. Try the flap with the carton sitting in a cupboard or drawer rather than holding it at an angle. If the box uses an insert, see whether it stays in position after repeated opening and closing.

Mark the filter shape where it can be seen quickly

A customer comparing packs may only see the narrow ends when cartons are lined up beside coffee. Put the filter shape and fit information on a face they can read without moving the rest. If two stacks are different sizes but use the same artwork, give each its own clear name or code. We print the text exactly as supplied. Have it reviewed before sending artwork.

Set a folded proof beside the brewer or accessory it fits. Keep any drawing away from the edge that folds under the lid. Compare the carton with the main coffee bag if both will share a display. Choose a print cue that connects the products while leaving room for the filter shape and count to be read on their own.

How to choose custom coffee filter boxes

  1. Measure the packed item

    Measure the widest part of the stack without flattening the rim.

  2. Reach the last filter

    Empty a sample box down to the last filter and check you can take it out easily.

  3. Review a physical sample

    Confirm the last filter can be removed without reaching past a sharp flap edge.

Total an order with the packaging cost calculator, or compare formats on the custom box price list. If products move inside the box, the packaging inserts guide compares card, corrugated, foam and pulp.

Custom Coffee Filter Boxes pricing, production and delivery

Pricing for custom coffee filter boxes starts at $0.79 per box for 1 box at 5 × 5 × 2 in (127 × 127 × 51 mm), in Printed folding paperboard, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom coffee filter boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom coffee filter boxes.

Options and guides for custom coffee filter boxes

FAQ

Custom Coffee Filter Boxes FAQ

Can a coffee filter box fit cone filters?

Yes. We size it to the cone filter stack. Send the stack's widest size and height.

How do I size a coffee filter box?

Measure the widest part of the stack without flattening the rim.

What should I check on the proof?

Confirm the last filter can be removed without reaching past a sharp flap edge.

What does the order include?

The offer is for the printed packaging. Items pictured inside or beside the box illustrate fit.

What is the minimum order for custom coffee filter boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.
Copied to clipboard!