Paperboard sleeve sized around an inner tray
Check the largest cookie and measure the tray with its wrap or seal in place.

Food and Takeaway Packaging
A cookie sleeve box is made to fit a tray or wrapped stack of cookies. One construction option is a paperboard sleeve sized around an inner tray.
From $0.79 per box
Price for 1 box at 5 × 2.5 × 1.25 in (127 × 64 × 32 mm), in Printed folding paperboard, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $0.79 | $0.79 |
| 100 | $0.79 | $79.00 |
| 250 | $0.79 | $197.50 |
| 500 | $0.79 | $395.00 |
| 1,000 | $0.79 | $790.00 |
| 2,500 | $0.79 | $1,975.00 |
| 5,000 | $0.79 | $3,950.00 |
Custom printed boxes sized for a tray or wrapped stack of cookies.
Check the largest cookie and measure the tray with its wrap or seal in place.
A cookie sleeve slides over an inner tray of cookies or a wrapped stack, so the tray holds the cookies and the sleeve carries the brand. Bakeries like the format because one sleeve can cover several flavors: the tray changes, while the sleeve shows the bakery name and a window or a sticker names the flavor. It works well for gift sets, wedding favors and coffee shop counters. The fit matters: too tight and the sleeve crushes the edges of the cookies as it slides on; too loose and the tray falls out when the pack is tilted. We size the sleeve to the tray with its wrap or seal in place, and leave a small finger gap at each end so the tray can be pushed out.
Our custom cookie sleeve boxes are part of the food and beverage packaging range alongside our custom bakery boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Paper tube · TUBE
The standard construction for custom cookie sleeve boxes is the paper tube (TUBE). A wound paperboard cylinder with a lid and a base. It suits tea, cosmetics, apparel and posters.
Check the largest cookie and measure the tray with its wrap or seal in place.
| Box style | Paper tube (TUBE) |
|---|---|
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Full-color exterior print, Matte or gloss finish where compatible with the board and folds |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 8–12 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
Every order is cut to your inside dimensions, so treat these sizes as starting points.
| Inside size (L × W × D) | What fits |
|---|---|
| 5 × 2.5 × 1.25 in (127 × 64 × 32 mm) | Starting point for a tray or wrapped stack of cookies. Confirm fit with a packed sample. |
| 4 × 2 × 1 in (102 × 51 × 25 mm) | Compact size: a tray or wrapped stack of cookies, travel or sample size |
| 6.25 × 3.25 × 1.5 in (159 × 83 × 38 mm) | Larger size: a tray or wrapped stack of cookies with an insert or extra room |
| 5 × 2.5 × 2.5 in (127 × 64 × 64 mm) | Double depth: a tray or wrapped stack of cookies, two layers deep |
Measure the loaded tray at the rim and at the base. A flared tray can need more room at the top even if it slides neatly on the work surface. Look at the wrapper seam and any folded tab at the end. Use an inner liner unless the selected board has been confirmed suitable for direct food contact. Put it in the sample before you decide how closely the sleeve should fit around the tray.
A tray that carries tall decorated cookies may have different clearance needs from one that holds a stack. Try both if you want to reuse the sleeve. A small stop on the tray can help keep it in position without making the sleeve hard to push on. Make sure a customer can release the tray using the gap or notch you give them, without having to pull against the cookies.
Place a filled sample on a cafe table and try pushing the tray from the short end. If the outer sleeve sits lower than the tray rim, check whether the tray lifts at one corner as it comes out. A shallow thumb opening can give the customer somewhere to press while the base stays level. Try lifting one cookie before sliding the rest of the tray out.
For favors or gift orders, test the sleeve with any ribbon or seal you plan to use. A ribbon wrapped across both ends may make it difficult to see where the tray should open. Keep the release point accessible once the ribbon comes off. If you want the tray to slide only from one end, show that on the proof and check it with the staff member who will fill the boxes.
If a window is part of the sleeve, line it up with the cookies when the tray is all the way in. A small gap at one end can move a row out of view, especially if the sleeve holds more than one tray size. Keep a spot for the flavor sticker near the opening without covering the cookies. Try the view with the finished tray rather than an empty blank.
A shared sleeve can carry the bakery name while the label identifies the flavor or occasion. Put a test label on a closed sample and make sure it does not catch when the sleeve slides. We print the text exactly as supplied. Have it reviewed before sending artwork, including any wording on the short side that is visible when several sleeves are stacked.
Check the largest cookie and measure the tray with its wrap or seal in place.
Fit the sleeve over a filled tray and check it moves on and off smoothly without catching the cookies.
Slide a filled tray into the sleeve and check that no corners catch or crush the cookies.
If products move inside the box, the packaging inserts guide compares card, corrugated, foam and pulp. Once your design is approved, custom box subscriptions keep the same boxes arriving on a schedule without re-proofing.
Pricing for custom cookie sleeve boxes starts at $0.79 per box for 1 box at 5 × 2.5 × 1.25 in (127 × 64 × 32 mm), in Printed folding paperboard, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom cookie sleeve boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom cookie sleeve boxes.