Food & Beverage

Custom Donut Boxes

A custom donut box is a flat, wide bakery box with a grease-resistant lining, sized to carry donuts side by side without stacking. It keeps glazes and toppings intact and carries the shop's brand out of the door.

Custom Donut Boxes price by quantity

From $0.79 per box

Price for 1 box at 5 × 5 × 3 in (127 × 127 × 76 mm), in Food-grade SBS 350–400 gsm, with full-color digital print on the outside.

QuantityPer boxTotal
1$0.79$0.79
100$0.79$79.00
250$0.79$197.50
500$0.79$395.00
1,000$0.79$790.00
2,500$0.79$1,975.00
5,000$0.79$3,950.00

What are custom donut boxes?

Donuts are oily and their glazes are sticky, so the inside of the box needs a grease barrier. A water-based grease-resistant coating stops oil soaking into the board and keeps the outside print clean.

Donuts should never be stacked, so boxes are wide and shallow. A half-dozen box holds six in two rows; a dozen box holds twelve in three rows of four. A lid window shows off the toppings.

Our custom donut boxes are part of the food and beverage packaging range alongside our custom bakery boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Donut Boxes styles and specifications

The standard construction for custom donut boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.

Lock-corner donut box

A one-piece box that pops up without glue.

Window donut box

A lid window to show glazes and toppings.

Single donut box

A small box or clamshell for one donut.

Custom Donut Boxes specifications

Box styleReverse tuck end (RTE)
PaperboardSBS paperboard, 300–400 gsm (14–24 pt)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFood-safe inks, Full-color CMYK, Window patching, Grease-resistant coating, Matte or gloss varnish, Foil stamping
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

Food-grade SBS 350–400 gsm
Virgin-fiber board approved for direct food contact.
Kraft food board
Unbleached board with a natural look for bakeries and cafés.
grease-resistant barrier
A water-based coating that stops grease marking the box without fluorochemicals.

Printing and finishing options

  • Food-safe inks
  • Full-color CMYK
  • Window patching
  • Grease-resistant coating
  • Matte or gloss varnish
  • Foil stamping

Who orders custom donut boxes

  • Donut shops and bakeries
  • Coffee shops and cafés
  • Event caterers and office catering

Popular sizes for custom donut boxes

The size buyers ask for most is 5 × 5 × 3 in (127 × 127 × 76 mm), used for one donut. The smallest size listed here is 5 × 5 × 3 in (127 × 127 × 76 mm) (one donut) and the largest is 15 × 11 × 3 in (381 × 279 × 76 mm) (A dozen). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
5 × 5 × 3 in (127 × 127 × 76 mm)One donut
8 × 8 × 3 in (203 × 203 × 76 mm)Four donuts
11 × 8 × 3 in (279 × 203 × 76 mm)Half a dozen
15 × 11 × 3 in (381 × 279 × 76 mm)A dozen

Lay out a mixed order with the tallest topping in place

Arrange the actual donuts on the liner you plan to use. A ring donut with a flat glaze may sit lower than a filled one with a high decoration. Allow room between pieces that have toppings on their edges. Check the finished layout with the lid lowered, then open it and look for any spots where glaze touched the board or window. Use an inner liner unless the selected board has been confirmed suitable for direct food contact.

Check the box at the point where staff hand an order over. A shallow lid may open easily while the pack is on the counter and catch once a customer is holding the base. Put the tallest donuts in the row where the lid has the most clearance during opening. If a box carries a mix of sizes, try a layer with the smaller ones near the edge and check what happens when the box is lifted.

Set up one box for the counter and another for delivery

For walk-in orders, try folding a sample at the same spot where the donuts are picked. A box with an attached lid saves a loose piece, but the lid needs room behind it to stay open while staff load the last row. If staff fold blanks in advance, check how the empty cartons nest and whether they can pull one out without catching a corner or opening the one below it.

For deliveries, place a full assortment on the tray or shelf used to carry it. Check how the base sits and where adjacent orders touch the sides. If the carton sits inside a carry bag, try sliding it in and taking it out while keeping the donuts level. Keep the opening edge accessible so the customer does not have to lift the carton out by a thin window or a single side wall.

Keep the order name clear of the toppings on display

A small window can show the center of the assortment while leaving a plain strip for staff to mark the order. Place a sample label beside the opening and check whether it covers the shop name or makes the lid harder to lift. If staff need to see contents through the window before handing the box over, set the window over the rows they use to tell similar orders apart.

A holiday design can stay on the lid while flavor or pickup details change on a sticker. Test the folded design on a sample with a full order so you can see where the edges settle. We print the text exactly as supplied. Have it reviewed before sending artwork, including any short note that sits on the part of the box customers will read first.

How to choose custom donut boxes

  1. Choose by count

    Size the box to your most common order: one, half a dozen or a dozen.

  2. Specify the grease barrier

    Glazed and filled donuts need a barrier on the inside.

  3. Leave room for toppings

    Allow 3 in of height for tall toppings and filled donuts.

New to custom packaging? See how ordering custom boxes works, from proof to delivery. If your launch date is close, rush production shortens the production time on most corrugated formats.

Custom Donut Boxes pricing, production and delivery

Pricing for custom donut boxes starts at $0.79 per box for 1 box at 5 × 5 × 3 in (127 × 127 × 76 mm), in Food-grade SBS 350–400 gsm, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom donut boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom donut boxes.

Options and guides for custom donut boxes

FAQ

Custom Donut Boxes FAQ

Are donut boxes grease-proof?

They are grease-resistant, using a water-based grease-resistant coating that holds back oil for normal carry times.

Do donut boxes ship flat?

Yes. Lock-corner boxes ship flat and fold up in seconds without glue.

What is the minimum order for custom donut boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.

What are custom donut boxes made from?

Food-grade SBS 350–400 gsm, Kraft food board and grease-resistant barrier. Virgin-fiber board approved for direct food contact. The board is confirmed on your proof before production.

What sizes do custom donut boxes come in?

Every box is cut to your inside dimensions. Popular sizes are 5 × 5 × 3 in (127 × 127 × 76 mm) for one donut, 8 × 8 × 3 in (203 × 203 × 76 mm) for four donuts and 11 × 8 × 3 in (279 × 203 × 76 mm) for half a dozen.
Copied to clipboard!