Tech & Games

Custom Electronics Boxes

A custom electronics box is a printed box with a fitted insert that holds a device and its accessories in place. It protects screens and components from impact and presents the product with the clean, precise look buyers expect from technology brands.

Custom Electronics Boxes price by quantity

From $1.32 per box

Price for 1 box at 4 × 4 × 2 in (102 × 102 × 51 mm), in 1.5–2 mm grayboard, with full-color digital print on the outside.

QuantityPer boxTotal
1$1.32$1.32
100$1.32$132.00
250$1.32$330.00
500$1.32$660.00
1,000$1.32$1,320.00
2,500$1.32$3,300.00
5,000$1.32$6,600.00

What are custom electronics boxes?

Electronics packaging is built around the insert: a molded pulp, foam or card tray with a cavity for the device and smaller cavities for cables, chargers and manuals. The outer box is often a rigid lid-and-base or a folding carton with a printed sleeve.

Molded pulp has replaced plastic trays for many brands, because it protects well and recycles with the box. Retail boxes also need space for barcodes, compliance marks and specifications.

Our custom electronics boxes are part of the retail and shelf packaging range alongside our custom product boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Electronics Boxes styles and specifications

The standard construction for custom electronics boxes is the two-piece lid and base (2PC). A separate lid slides down over a base; made from rigid grayboard or folding board. It suits gifts, apparel and presentation sets.

Rigid lid and base

A premium box with a molded pulp or foam insert.

Folding carton with sleeve

A lower-cost retail box with a printed sleeve.

Mailer with insert

A corrugated mailer for direct-to-consumer devices.

Custom Electronics Boxes specifications

Box styleTwo-piece lid and base (2PC)
Rigid boardRigid grayboard, 1,200–2,000 gsm, 1/16–3/32 in (1.5–2.5 mm) thick
WrapPrinted wrap paper, 120–157 gsm
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFull-color wrap print, Foil stamping, Embossing and debossing, Soft-touch lamination, Spot UV, Ribbon pulls, Custom foam or card inserts
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time12–18 business days after artwork approval
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

1.5–2 mm grayboard
Dense rigid board wrapped in printed paper; it does not flex or fold, so the box keeps its shape.
Printed wrap paper 120–157 gsm
Coated art paper printed in full color and wrapped around the board.
Specialty and textured papers
Linen, felt and colored stock papers for a premium hand feel.

Printing and finishing options

  • Full-color wrap print
  • Foil stamping
  • Embossing and debossing
  • Soft-touch lamination
  • Spot UV
  • Ribbon pulls
  • Custom foam or card inserts

Who orders custom electronics boxes

  • Consumer electronics and audio brands
  • Accessory and charger makers
  • Smart home and wearable start-ups

Popular sizes for custom electronics boxes

The size buyers ask for most is 4 × 4 × 2 in (102 × 102 × 51 mm), used for earbuds and small accessories. The smallest size listed here is 4 × 4 × 2 in (102 × 102 × 51 mm) (earbuds and small accessories) and the largest is 12 × 9 × 3 in (305 × 229 × 76 mm) (tablets and smart devices). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
4 × 4 × 2 in (102 × 102 × 51 mm)Earbuds and small accessories
7 × 4 × 2 in (178 × 102 × 51 mm)Phones and chargers
9 × 7 × 3 in (229 × 178 × 76 mm)Headphones and speakers
12 × 9 × 3 in (305 × 229 × 76 mm)Tablets and smart devices

Mark where the device can and cannot take pressure

Give us a view of the device from the top, bottom and sides. Point out features that should stay clear of the insert, such as a switch, screen, lens or side connector. A device can fit within the stated dimensions while a corner of the tray still presses on a control. Use the packed orientation you want and mark where the device can be held without touching the parts you need to protect.

Try lifting the device from the tray before the accessories go in and again after the box is fully packed. A short edge may be easier to grasp than the top, especially if the device has a smooth face. A finger recess can let the customer lift it without pulling on a cable or a protective wrap. Include the wrap in the sample fit and check how much room it needs at the folded ends.

Give cables and adapters their own clearances

A cable can fit in a cavity by length and still push up against the lid because its plug is turned the wrong way. Load the cord the way staff will coil it, then check the highest point of the plug and the folded cable. If an adapter sits beneath the device, make sure the tray stays level and can be lifted without the adapter catching on the side.

For a product sold with different accessories, pack each version in a trial box. A different plug shape or a longer manual may change the fit even when the device is the same. Decide whether the accessory pocket should fit both versions or use its own insert. A visible mark on the underside of the insert can help staff choose the right one without changing the appearance of the opened box.

Check the display face and the packing side together

A retailer may display the carton upright while your team fills it on its side. On the sample, mark the display face and try the full packing motion. Keep the part number on a face staff can see without opening the box. If the top cover hides an end label when closed, move the label to a surface with room for it and check the change on an assembled sample.

If the box ships inside a second carton, check the fit with the sleeve and all the protective layers in place. Give the corners enough room that the outer pack does not rub a printed edge as the box goes in. Put a note in the brief about the final opening order. The customer should be able to get to the device or the instructions first, according to the order you intended.

How to choose custom electronics boxes

  1. Send the device and accessories

    Inserts need exact dimensions or physical samples.

  2. Choose the insert material

    Pulp for sustainability, foam for maximum protection, card for light items.

  3. Plan compliance marks

    Leave space for barcodes, safety and recycling marks.

Unfamiliar terms on a quote? The packaging glossary explains them in plain English. No artwork yet? Our packaging design services team builds print-ready files on your dieline.

Custom Electronics Boxes pricing, production and delivery

Pricing for custom electronics boxes starts at $1.32 per box for 1 box at 4 × 4 × 2 in (102 × 102 × 51 mm), in 1.5–2 mm grayboard, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom electronics boxes takes 12–18 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom electronics boxes.

Options and guides for custom electronics boxes

FAQ

Custom Electronics Boxes FAQ

Can you make molded pulp inserts?

Yes. Pulp inserts are molded to your device and accessories and recycle with the box.

Do electronics boxes need special protection?

A fitted insert and a correctly sized outer shipper are usually enough; fragile devices may need a drop test.

What is the minimum order for custom electronics boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.

What are custom electronics boxes made from?

1.5–2 mm grayboard, Printed wrap paper 120–157 gsm and Specialty and textured papers. Dense rigid board wrapped in printed paper; it does not flex or fold, so the box keeps its shape. The board is confirmed on your proof before production.

What sizes do custom electronics boxes come in?

Every box is cut to your inside dimensions. Popular sizes are 4 × 4 × 2 in (102 × 102 × 51 mm) for earbuds and small accessories, 7 × 4 × 2 in (178 × 102 × 51 mm) for phones and chargers and 9 × 7 × 3 in (229 × 178 × 76 mm) for headphones and speakers.
Copied to clipboard!