Tuck end carton
Opens at one end to slide the stack in and out. A simple, low-cost carton for chilled patties.

Food & Beverage
A custom hamburger patty box is a printed food carton that holds a stack or a layer of raw or frozen burger patties for retail sale. It is sized to the patty diameter and count, with a coated inside that resists grease and moisture, and carries the product name, weight and handling text on its panels.
From $0.79 per box
Price for 1 box at 5 × 5 × 2.25 in (127 × 127 × 57 mm), in Food-grade SBS 350–400 gsm, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $0.79 | $0.79 |
| 100 | $0.79 | $79.00 |
| 250 | $0.79 | $197.50 |
| 500 | $0.79 | $395.00 |
| 1,000 | $0.79 | $790.00 |
| 2,500 | $0.79 | $1,975.00 |
| 5,000 | $0.79 | $3,950.00 |
A patty box is sized from the patty, not from a standard carton. A quarter-pound patty is usually about 4.5 in (114 mm) across, so a stack of four needs an inside of roughly 5 × 5 in (127 × 127 mm), with the depth set by the stack height and the sheets between the patties. A layer of patties laid side by side needs a wider, shallow box instead.
Raw meat brings grease and moisture, and frozen product adds condensation when the box comes out of the freezer. The inside of the carton is coated to resist both. Ask for a grease-resistant barrier, and test a filled box through your own freezer and thaw cycle before ordering a full run, because storage conditions vary between kitchens and stores.
The panels carry a lot of required text: the product name, net weight, ingredients, safe handling instructions, the establishment number where it applies, and storage directions. Plan that text into the dieline first, then the brand artwork. You are responsible for the regulatory content; we print the approved artwork and check that small text stays legible.
Most patty boxes are folding cartons with tuck ends or a glued seal end, which keep the cost per pack low and fold quickly on a packing line. A window can show the patties, but plan it with care: the film and the board around it have to cope with the same cold and moisture as the rest of the box.
Our custom hamburger patty boxes are part of the food and beverage packaging range alongside our custom bakery boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom hamburger patty boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
Opens at one end to slide the stack in and out. A simple, low-cost carton for chilled patties.
Both ends are glued shut after filling, so the pack shows if it has been opened; common for frozen product.
A die-cut window shows the patties. Check the film and board in cold storage before a full run.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Paperboard | SBS paperboard, 300–400 gsm (14–24 pt) |
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Food-safe inks, Full-color CMYK, Window patching, Grease-resistant coating, Matte or gloss varnish, Foil stamping |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 8–12 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 5 × 5 × 2.25 in (127 × 127 × 57 mm), used for four quarter-pound patties in one stack. The smallest size listed here is 5 × 5 × 2.25 in (127 × 127 × 57 mm) (four quarter-pound patties in one stack) and the largest is 10 × 10 × 1.25 in (254 × 254 × 32 mm) (four patties in a single layer, two by two). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 5 × 5 × 2.25 in (127 × 127 × 57 mm) | Four quarter-pound patties in one stack |
| 5 × 5 × 3.25 in (127 × 127 × 83 mm) | Six quarter-pound patties in one stack |
| 10 × 5 × 1.25 in (254 × 127 × 32 mm) | Two patties side by side in a single layer |
| 10 × 10 × 1.25 in (254 × 254 × 32 mm) | Four patties in a single layer, two by two |
Measure the sealed inner pack at its folded ends and thickest seam. For raw meat, use a suitable sealed inner pack. Use an inner liner unless the selected board has been confirmed suitable for direct food contact. Try feeding the sealed package into a sample without catching it on the flaps.
Stand a filled retail carton on its shelf edge. Check whether the stack leans against the short end. Fit a stop if it needs support and see whether the display panel stays flat.
Test the tallest and shortest sealed stack if they share one carton. Include any separating sheets, since their folds can widen the pack. Put the count on an end staff can read before loading.
Mark the loading end on the proof if retail and food service cartons are filled differently. Try opening a sample after the normal time in cold storage, since a flap can feel different after that hold.
View a folded sample behind the shelf edge. Put the name and count on a face that stays visible in a stack. We print the text exactly as supplied. Have it reviewed before sending artwork.
Keep the approved carton with a sample of the sealed pack and a note of the loading direction. If a new wrapper has a wider seam, test it before repeating the order.
Freeze a stack of patties with their separating sheets and measure diameter and height frozen. Frozen patties keep their shape, and that is the size the box must hold.
Fill a sample box, freeze it, take it out and let it sit as it would in a store. Check the print, the corners and the closures before ordering a full run.
Place the weight, ingredients and handling instructions before the brand design so they are not squeezed in at the end.
A seal end shows if a pack has been opened, which many grocery buyers expect for frozen meat. A tuck end suits butchers packing to order.
Still deciding? The custom box FAQ answers the questions buyers ask most before ordering. Total an order with the packaging cost calculator, or compare formats on the custom box price list.
Pricing for custom hamburger patty boxes starts at $0.79 per box for 1 box at 5 × 5 × 2.25 in (127 × 127 × 57 mm), in Food-grade SBS 350–400 gsm, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom hamburger patty boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom hamburger patty boxes.