Tuck end with hang tab
A standard carton with a hanging tab.

Retail & Shelf
A custom hanger box is a folding carton with an extended back panel that has a die-cut hole or slot, so the box hangs on a retail peg or hook. It puts small products at eye level and saves shelf space.
From $0.56 per box
Price for 1 box at 3 × 1 × 6 in (76 × 25 × 152 mm), in SBS paperboard 300–400 gsm, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $0.56 | $0.56 |
| 100 | $0.56 | $56.00 |
| 250 | $0.56 | $140.00 |
| 500 | $0.56 | $280.00 |
| 1,000 | $0.56 | $560.00 |
| 2,500 | $0.56 | $1,400.00 |
| 5,000 | $0.56 | $2,800.00 |
The hang tab is part of the carton's die-line, so it costs nothing extra to produce. Euro slot holes suit most peg systems, and a round hole suits simple hooks.
Hanger boxes are common for accessories, phone cases, cosmetics, tools, toys and hardware: anything small enough to hang and bought by browsing a wall.
Our custom hanger boxes are part of the retail and shelf packaging range alongside our custom product boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom hanger boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
A standard carton with a hanging tab.
A hang tab plus a window to show the product.
A folded tab for heavier products.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Paperboard | SBS paperboard, 300–400 gsm (14–24 pt) |
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Full-color CMYK, Pantone spot colors, Matte or gloss lamination, Soft-touch lamination, Foil stamping, Embossing and debossing, Spot UV, Window patching |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 8–12 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 3 × 1 × 6 in (76 × 25 × 152 mm), used for cosmetics and accessories. The smallest size listed here is 3 × 1 × 6 in (76 × 25 × 152 mm) (cosmetics and accessories) and the largest is 6 × 2 × 9 in (152 × 51 × 229 mm) (toys). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 3 × 1 × 6 in (76 × 25 × 152 mm) | Cosmetics and accessories |
| 4 × 1.5 × 7 in (102 × 38 × 178 mm) | Chargers and cables |
| 5 × 2 × 8 in (127 × 51 × 203 mm) | Tools and hardware |
| 6 × 2 × 9 in (152 × 51 × 229 mm) | Toys |
Use the peg or display arm that will hold the carton. Push a full sample to the back and then pull it forward as a shopper would. Watch whether the hook catches on the cutout or the tab leans. The center of the box can sit below the peg while the weight inside pulls it to one side.
Fit the product before deciding how high the tab needs to sit. A narrow box can twist if a heavy part is off center. Use a support that keeps the item in the intended place. Try it next to adjacent boxes and check how much room staff need to add a new one.
The cutout takes away some of the board above the product. Leave room around it and check how the tab folds when the carton is loaded. If the tab is folded down for shipment, make sure it can be lifted without peeling a seal. Test the motion on a filled sample.
If your carton also stands on a shelf, check the bottom while the tab is folded away or upright as intended. See whether the front leans forward. A tab that works on a peg may need its own place above a shelf label so the product name stays readable.
Stand on the aisle side and look at the sample with other packs close to it. Place the main name below the part the hook covers. If a window or cutout shows a small item, put it where the product stays visible even if the box turns slightly. Try the intended light and display height.
Keep stock labels away from the hole and the flap customers open. On a row of close variants, repeat the name on an end that staff can see while filling the display. Test the artwork after the carton has been hung and removed so the readable panel does not depend on a perfectly flat tab.
Euro slot for most peg systems, round hole for simple hooks.
Use a double-thickness tab for products over about 300 g.
Add a window if the product sells on looks.
Not sure of the size? The box size finder suggests the smallest box that fits your product. New to custom packaging? See how ordering custom boxes works, from proof to delivery.
Pricing for custom hanger boxes starts at $0.56 per box for 1 box at 3 × 1 × 6 in (76 × 25 × 152 mm), in SBS paperboard 300–400 gsm, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom hanger boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom hanger boxes.