Open-ended folded takeaway sleeve
Measure the filled bun without compression. Leave the top accessible and the lower face wide enough to support it.

Food and Takeaway Packaging
A hot dog sleeve box is made to fit a hot dog bun and food-contact liner. One construction option is a open-ended folded takeaway sleeve.
From $0.79 per box
Price for 1 box at 6.25 × 2 × 1.75 in (159 × 51 × 44 mm), in Printed folding paperboard, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $0.79 | $0.79 |
| 100 | $0.79 | $79.00 |
| 250 | $0.79 | $197.50 |
| 500 | $0.79 | $395.00 |
| 1,000 | $0.79 | $790.00 |
| 2,500 | $0.79 | $1,975.00 |
| 5,000 | $0.79 | $3,950.00 |
Custom printed boxes sized for a hot dog bun and food-contact liner.
Measure the filled bun without compression. Leave the top accessible and the lower face wide enough to support it.
A hot dog sleeve is an open-ended folded tray that holds a hot dog in its bun. It keeps the bun upright, catches toppings and gives the customer something to hold that is not hot or greasy, which is why stadiums, ballparks, food trucks and fairs use them by the thousand. The bottom must be wide enough to keep the bun from tipping, and the top stays open so the hot dog can be eaten without unwrapping. Grease and heat are the main tests, so a liner is often added and the board is checked with real toppings. Vendors usually print a bold logo or team colors on the outside, which shows up in every photo taken at the game.
Our custom hot dog sleeve boxes are part of the food and beverage packaging range alongside our custom bakery boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Sleeve · SLV
The standard construction for custom hot dog sleeve boxes is the sleeve (SLV). A printed band that slides over a box or tray to brand plain packaging. It suits seasonal versions and product ranges.
Measure the filled bun without compression. Leave the top accessible and the lower face wide enough to support it.
| Box style | Sleeve (SLV) |
|---|---|
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Full-color exterior print, Matte or gloss finish where compatible with the board and folds |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 8–12 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
Every order is cut to your inside dimensions, so treat these sizes as starting points.
| Inside size (L × W × D) | What fits |
|---|---|
| 6.25 × 2 × 1.75 in (159 × 51 × 44 mm) | Starting point for a hot dog bun and food-contact liner. Confirm fit with a packed sample. |
| 5 × 1.5 × 1.5 in (127 × 38 × 38 mm) | Compact size: a hot dog bun and food-contact liner, travel or sample size |
| 7.75 × 2.5 × 2.25 in (197 × 64 × 57 mm) | Larger size: a hot dog bun and food-contact liner with an insert or extra room |
| 6.25 × 2 × 3.5 in (159 × 51 × 89 mm) | Double depth: a hot dog bun and food-contact liner, two layers deep |
Set a full hot dog in a folded sample with the toppings you normally serve. A split bun may open wider on the side that carries the filling, and a longer bun may rest on one end of the sleeve. Try picking it up where a customer would hold it. Use an inner liner unless you have confirmed the board is suitable for direct food contact. Include any fold in the liner when checking the base width.
See how much of the bun stays above the side walls. A high wall may hold loose toppings in place but make it harder to eat without lifting the hot dog out. A low wall can leave a hand close to a messy edge. Check the grip with the sleeve held level and again when one end is raised, as someone might do while walking away from a counter.
Put the sleeves at the station where staff finish the hot dogs. Try picking one up with a gloved hand and adding the prepared bun without flattening the sides. If sleeves are nested before use, check that staff can pull them apart without tearing an edge. A sample that is easy to use once may need a different opening fold when dozens are prepared in a stack.
For a meal with sides, place the filled sleeve in the same tray as the fries and any cups. It should lie in a stable position without requiring the customer to push aside another item to pick it up. Check where the liner gathers at the ends, since an extra fold can lift one side. If a larger bun needs a second size, try both on that tray.
Use the outside walls for a short mark that can still be seen with the liner folded over the rim. Place a trial print where staff grip the sleeve and see how much of it is hidden. If a design changes for each event, keep the opening direction and size mark easy to recognize. We print the text exactly as supplied. Have it reviewed before sending artwork.
Check a folded proof with the liner already fitted. The end folds may turn a printed line inward or bring two colors together at a join. Put the longest line on a clear face and keep any small text away from the tapered corner. Look at the sleeve as it sits in a carry tray as well as when it is handed over on its own.
Measure the filled bun without compression. Leave the top accessible and the lower face wide enough to support it.
Fill a sample with your messiest combination and hold it for a few minutes to check for sagging and leaks.
Check the stock and liner with the intended heat, grease and hold time.
Want to feel the board and finishes first? Order a free sample pack before you commit. Still deciding? The custom box FAQ answers the questions buyers ask most before ordering.
Pricing for custom hot dog sleeve boxes starts at $0.79 per box for 1 box at 6.25 × 2 × 1.75 in (159 × 51 × 44 mm), in Printed folding paperboard, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom hot dog sleeve boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom hot dog sleeve boxes.