Side-loading pie carton
Slide the tin onto the base from the front.

Food and Takeaway Packaging
A pie box is a shallow bakery carton that supports a pie tin or board, with clearance above the crust and room to lift it out level.
From $0.79 per box
Price for 1 box at 5 × 5 × 2 in (127 × 127 × 51 mm), in Virgin-fiber paperboard, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $0.79 | $0.79 |
| 100 | $0.79 | $79.00 |
| 250 | $0.79 | $197.50 |
| 500 | $0.79 | $395.00 |
| 1,000 | $0.79 | $790.00 |
| 2,500 | $0.79 | $1,975.00 |
| 5,000 | $0.79 | $3,950.00 |
Printed cartons for individual pies and full-size bakery pies, measured around the tin rim and crust.
Pie tins of the same nominal diameter may have wider rolled rims or deeper bases. Check the full outside profile. A side-loading carton can make a hot pie easier to pack without lowering it past high walls.
Our custom pie boxes are part of the food and beverage packaging range alongside our custom bakery boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom pie boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
Slide the tin onto the base from the front.
Position the window above the crust and away from load-bearing edges.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Strength grades | 32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg) |
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Exterior print, Window patch where suitable, Grease-resistant inner surface where specified |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 8–12 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 5 × 5 × 2 in (127 × 127 × 51 mm), used for one small pie in a tin. The smallest size listed here is 5 × 5 × 2 in (127 × 127 × 51 mm) (one small pie in a tin) and the largest is 10 × 10 × 3 in (254 × 254 × 76 mm) (A full-size pie after allowing for the rim). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 5 × 5 × 2 in (127 × 127 × 51 mm) | One small pie in a tin |
| 10 × 10 × 3 in (254 × 254 × 76 mm) | A full-size pie after allowing for the rim |
| 4 × 4 × 1.5 in (102 × 102 × 38 mm) | Compact size: one small pie in a tin, travel or sample size |
| 6.25 × 6.25 × 2.5 in (159 × 159 × 64 mm) | Larger size: one small pie in a tin with an insert or extra room |
Take the outer measurement at the rolled rim and note how far the bottom narrows. A round pie may fit inside a square carton while leaving enough open space at each corner for fingers. Use the real tin or board, including any handle or band that sticks out. Try placing it in the sample and lifting it again without pinching the crust or scraping the rim along a cut edge.
If the tin sits in a separate tray, check whether the tray has a clean edge you can hold when it is full. A tray that fits flush against the box can be awkward to pull out. A small opening in the wall or a tray lip can give you a place to start. Use an inner liner unless you have confirmed the selected board is suitable for direct food contact, and include it in the fitting.
Open a sample from the side that staff will use. Make sure the flap lies clear as the tin crosses it. A pie tin with a tall folded rim can catch at the corners of the opening even when it has space inside. If you need to tip the pie to get it in, test a lower loading edge or a lid that lifts farther out of the way.
Put the box on the counter where it will be opened. Check whether a customer can lift the pie or slide the tray out without getting close to the crust. For a take-home order, ask someone who did not pack it to try the motion. Mark the edge they reach for first. A printed cue on that side can help when an opening is hard to spot from above.
A lid window can show a lattice crust or a decorated center, but the bright rim of a tin may fill the view if the opening sits too far off center. Check the folded sample with the pie at the height it will sit. Leave space for a store label outside the window and any corner where staff need to grip the lid. View the sample on the counter before finalizing the window cut.
If you sell several flavors in the same tin, keep the box layout consistent and reserve a place for the variant name. Test a label on the assembled panel where the customer sees it. Avoid placing it across a flap that will fold under the box. We print the text exactly as supplied. Have it reviewed before sending artwork, including any wording shared across several pie sizes.
Measure the maximum rim diameter and crust height.
Trial the carton with a filled pie at actual packing temperature.
See what a box will cost to ship with the dimensional weight calculator. Unfamiliar terms on a quote? The packaging glossary explains them in plain English.
Pricing for custom pie boxes starts at $0.79 per box for 1 box at 5 × 5 × 2 in (127 × 127 × 51 mm), in Virgin-fiber paperboard, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom pie boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom pie boxes.