Ecommerce Mailers

Custom Roll-End Front Tuck Boxes

A roll-end front tuck box is a die-cut mailer with rolled sidewalls and a lid flap that tucks into the front of the assembled box.

Custom Roll-End Front Tuck Boxes price by quantity

From $0.99 per box

Price for 1 box at 8 × 6 × 3 in (203 × 152 × 76 mm), in E-flute corrugated, with full-color digital print on the outside.

QuantityPer boxTotal
1$0.99$0.99
100$0.99$99.00
250$0.99$247.50
500$0.99$495.00
1,000$0.99$990.00
2,500$0.99$2,475.00
5,000$0.99$4,950.00

What are custom roll-end front tuck boxes?

Front-tuck corrugated mailers for shipments and shelf-ready packs that need a clean top and a defined front closure.

The front tuck changes the closing action compared with a top tuck. Keep the product and insert clear of the flap’s path. Test the assembled box with the shipping label in place so the label does not obstruct opening.

Our custom roll-end front tuck boxes are part of the ecommerce packaging range alongside our custom mailer boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Roll-End Front Tuck Boxes styles and specifications

The standard construction for custom roll-end front tuck boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.

Front tuck with dust wings

Use wings to support the closing sides.

Front tuck with finger access

Place a suitable cut where the customer lifts the flap.

Custom Roll-End Front Tuck Boxes specifications

Box styleReverse tuck end (RTE)
Strength grades32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFull-color exterior, Matte or gloss varnish
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

E-flute corrugated
A thin construction for compact shipments and detailed print.
B-flute corrugated
Consider for a wider or heavier pack.

Printing and finishing options

  • Full-color exterior
  • Matte or gloss varnish

Who orders custom roll-end front tuck boxes

  • Ecommerce packing teams
  • Retailers comparing mailer closures

Popular sizes for custom roll-end front tuck boxes

The size buyers ask for most is 8 × 6 × 3 in (203 × 152 × 76 mm), used for A small accessory mailer. The smallest size listed here is 8 × 6 × 3 in (203 × 152 × 76 mm) (A small accessory mailer) and the largest is 12 × 9 × 4 in (305 × 229 × 102 mm) (A larger retail and parcel pack). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
8 × 6 × 3 in (203 × 152 × 76 mm)A small accessory mailer
12 × 9 × 4 in (305 × 229 × 102 mm)A larger retail and parcel pack
6.5 × 4.75 × 2.5 in (165 × 121 × 64 mm)Compact size: A small accessory mailer, travel or sample size
10 × 7.5 × 3.75 in (254 × 191 × 95 mm)Larger size: A small accessory mailer with an insert or extra room

How a front tuck mailer differs

On a roll-end front tuck box, the lid folds down over the front of the box and tucks in at the front, rather than tucking in at the top edge. The rolled side walls are doubled for strength, and the tuck sits on the face the customer sees first. That front panel carries the logo and becomes the first thing the customer opens.

The front tuck gives a neat, flush top with no visible tuck edge, which looks good on a shelf and when the box is photographed from above. It also makes the box easy to open from the front, without lifting it, which suits retail-ready packs and subscription boxes stacked on top of each other.

Packing and opening the box

Like other roll-end mailers, a front tuck box folds from a single flat sheet with no glue, which keeps storage and freight down. At the packing table, the side walls are rolled in, the product goes in and the lid folds over and tucks into the front. A finger cut at the front edge helps the customer lift the tuck without tearing it.

Because the lid closes over the front, keep any insert and the product clear of the path the flap takes as it folds down. Check this on a packed sample, along with where the shipping label will sit, so the label does not cover the tuck or the opening edge.

Printing a front tuck box

The front tuck and the top of the lid are seen together when the box is closed, so artwork can run across both as one design. Inside, the lid and the front panel are the first surfaces seen when the box opens, which makes them good places for a message or pattern. Inside printing on corrugated board is one of the most visible upgrades for the cost.

E-flute board is the usual choice for a clean edge and good print, with B-flute for heavier contents. A white outer liner shows color best; kraft suits a natural look.

How to choose custom roll-end front tuck boxes

  1. Measure the inside width after rolling

    Doubled sidewalls reduce usable clearance.

  2. Check the flap path

    Load the insert and close the sample without forcing the tuck.

Total an order with the packaging cost calculator, or compare formats on the custom box price list. If products move inside the box, the packaging inserts guide compares card, corrugated, foam and pulp.

Custom Roll-End Front Tuck Boxes pricing, production and delivery

Pricing for custom roll-end front tuck boxes starts at $0.99 per box for 1 box at 8 × 6 × 3 in (203 × 152 × 76 mm), in E-flute corrugated, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom roll-end front tuck boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom roll-end front tuck boxes.

Options and guides for custom roll-end front tuck boxes

FAQ

Custom Roll-End Front Tuck Boxes FAQ

Is a front tuck the same as a top tuck?

The flap closes into a different face. Compare the fold path and artwork orientation on assembled samples.

What is the minimum order for custom roll-end front tuck boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.

What are custom roll-end front tuck boxes made from?

E-flute corrugated and B-flute corrugated. A thin construction for compact shipments and detailed print. The board is confirmed on your proof before production.

What sizes do custom roll-end front tuck boxes come in?

Every box is cut to your inside dimensions. Popular sizes are 8 × 6 × 3 in (203 × 152 × 76 mm) for A small accessory mailer and 12 × 9 × 4 in (305 × 229 × 102 mm) for A larger retail and parcel pack.

Which construction suits custom roll-end front tuck boxes?

The standard build is the reverse tuck end (RTE). Front tuck with dust wings: use wings to support the closing sides. Front tuck with finger access is the main alternative.
Copied to clipboard!