Shipping & Transit

Custom Wedding Dress Storage Boxes

A custom wedding dress storage box is a large, shallow corrugated box sized to hold a folded wedding dress flat for storage. Bridal shops and dress cleaners use printed versions to hand a cleaned and folded dress back to the customer in a box that carries their name.

Custom Wedding Dress Storage Boxes price by quantity

From $2.79 per box

Price for 1 box at 24 × 18 × 6 in (610 × 457 × 152 mm), in 32 ECT single-wall kraft, with full-color digital print on the outside.

QuantityPer boxTotal
1$2.79$2.79
100$2.79$279.00
250$2.79$697.50
500$2.79$1,395.00
1,000$2.79$2,790.00
2,500$2.79$6,975.00
5,000$2.79$13,950.00

What are custom wedding dress storage boxes?

A dress box is wide and shallow so the dress can be folded in a few large folds rather than many small ones. The usual approach is to lay the bodice flat in the center and fold the skirt and train over it, with soft padding in each fold. The box size follows the dress: a slim sheath dress needs far less room than a full ball gown with a long train.

The box is made from corrugated board, with a lid that lifts off or a hinged lid that folds over. A lift-off lid is easier for a shop to pack and lets the customer see the dress as soon as the lid is removed. A window in the lid shows the bodice without opening the box, but it is one more material in long-term storage, so many cleaners leave it out.

Long-term storage depends on the conditions, not only the box. Store the box flat, somewhere cool, dry and dark, away from basements and attics where temperature and humidity swing. If the dress will be stored for years, ask your preservation specialist what board and padding they recommend; we do not certify the board for archival use.

For a shop, the box is the last thing the customer takes home. A printed lid with the shop name and a short care note inside gives the customer the instructions they need years later, when they open the box again.

Our custom wedding dress storage boxes are part of the shipping and ecommerce boxes range alongside our custom shipping boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Wedding Dress Storage Boxes styles and specifications

The standard construction for custom wedding dress storage boxes is the two-piece lid and base (2PC). A separate lid slides down over a base; made from rigid grayboard or folding board. It suits gifts, apparel and presentation sets.

Two-piece lid and base

A deep lid over a shallow base. It is the easiest to pack and lets the customer see the dress at once.

Hinged lid box

A one-piece box with a lid that folds over; it ships flat and folds into shape at the shop.

Window lid

A lid with a clear window over the bodice, for showing the dress without opening the box.

Custom Wedding Dress Storage Boxes specifications

Box styleTwo-piece lid and base (2PC)
Strength grades32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFlexographic 1–3 spot colors, Full-color digital print, Inside print, Handling marks, Water-based inks
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

32 ECT single-wall kraft
Standard parcel grade, carrier-rated up to 65 lb (29 kg) gross.
44 ECT single-wall kraft
Stronger stacking and puncture resistance for heavier loads.
Double-wall corrugated
Two flute layers for heavy, fragile or export shipments.

Printing and finishing options

  • Flexographic 1–3 spot colors
  • Full-color digital print
  • Inside print
  • Handling marks
  • Water-based inks

Who orders custom wedding dress storage boxes

  • Bridal shops handing over dresses after alterations
  • Dry cleaners offering wedding dress cleaning
  • Dress preservation specialists
  • Formal wear and costume rental businesses

Popular sizes for custom wedding dress storage boxes

The size buyers ask for most is 24 × 18 × 6 in (610 × 457 × 152 mm), used for sheath, slip and short dresses. The smallest size listed here is 22 × 16 × 4 in (559 × 406 × 102 mm) (veils and bridesmaid dresses) and the largest is 30 × 22 × 8 in (762 × 559 × 203 mm) (ball gowns and dresses with long trains). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
24 × 18 × 6 in (610 × 457 × 152 mm)Sheath, slip and short dresses
26 × 20 × 8 in (660 × 508 × 203 mm)A-line dresses with a short train
30 × 22 × 8 in (762 × 559 × 203 mm)Ball gowns and dresses with long trains
22 × 16 × 4 in (559 × 406 × 102 mm)Veils and bridesmaid dresses

Give trims and fasteners their own clearance

Place the folded dress in the sample with the padding your specialist recommends. Check where beads, zippers and clasps rest.

Try lifting the dress by the supported folds. Leave enough room to avoid pulling a train or veil against a cut edge.

Fit the box into the space where it will be kept

Measure the intended shelf or storage space with the lid on the sample. Check whether there is room to lift the lid without dragging the box out.

If the box has a window, check the view with the folded layers in place. Keep any dress trim clear of the window surface.

Make the contents easy to identify after closing

Leave a plain area for the name or a storage note. Place it where it remains visible when the box lies flat.

Keep the chosen box and the folding instructions together. Test a different dress shape separately if it changes the depth or width of the packed folds.

How to choose custom wedding dress storage boxes

  1. Size for the largest dress you handle

    Fold one of the fullest gowns you handle as you would for storage and measure the folded bundle. Use that size for gowns and a smaller box for slim dresses and veils.

  2. Choose the lid for the handover

    A lift-off lid suits shops that show the dress to the customer at collection. A hinged lid suits cleaners who ship boxes or store them flat before use.

  3. Print the care note inside

    Put the storage advice inside the lid so it stays with the dress: store flat, cool, dry and dark, and refold occasionally.

  4. Ask about long-term storage

    For storage of many years, follow your preservation specialist's advice on board and padding; we do not certify boxes for archival use.

If your launch date is close, rush production shortens the production time on most corrugated formats. Want to feel the board and finishes first? Order a free sample pack before you commit.

Custom Wedding Dress Storage Boxes pricing, production and delivery

Pricing for custom wedding dress storage boxes starts at $2.79 per box for 1 box at 24 × 18 × 6 in (610 × 457 × 152 mm), in 32 ECT single-wall kraft, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom wedding dress storage boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom wedding dress storage boxes.

Options and guides for custom wedding dress storage boxes

FAQ

Custom Wedding Dress Storage Boxes FAQ

What size box does a wedding dress need?

Fold the dress as it will be stored and measure the bundle. Slim dresses usually fit about 24 × 18 × 6 in (610 × 457 × 152 mm); full ball gowns with trains need about 30 × 22 × 8 in (762 × 559 × 203 mm).

Are these boxes acid-free?

We do not certify the board as acid-free or archival. If the dress will be stored for many years, follow your preservation specialist's advice on materials.

Can the box have a window?

Yes. A window in the lid shows the bodice. Some cleaners leave it out for long-term storage.

Do the boxes come with tissue or padding?

No. We make the printed boxes only; the padding comes from your preservation supplier.

What is the minimum order for custom wedding dress storage boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.
Copied to clipboard!