Shipping & Transit

Custom Moving Boxes

A custom moving box is a large, strong corrugated carton printed with your logo and practical moving details such as room and contents panels, fragile marks and handle holes. Removal companies, self-storage sites and estate agents give them to customers so their brand travels into every new home.

Custom Moving Boxes price by quantity

From $1.35 per box

Price for 1 box at 16 × 12 × 12 in (406 × 305 × 305 mm), in 32 ECT single-wall kraft, with full-color digital print on the outside.

QuantityPer boxTotal
1$1.35$1.35
100$1.35$135.00
250$1.35$337.50
500$1.35$675.00
1,000$1.35$1,350.00
2,500$1.35$3,375.00
5,000$1.35$6,750.00

What are custom moving boxes?

Moving boxes are carried by hand, stacked high in vans and stored for months, so they need more strength than a parcel box. We make them in 32 ECT for light and medium contents and 44 ECT or double-wall for books, kitchenware and long-term storage.

Print is where moving boxes earn their cost. A logo with your phone number and website stays in the customer's home for weeks, and printed room, contents and "this way up" panels make the box easier to use than a plain one.

Most moving box programs use three or four sizes: small for books and heavy items, medium for kitchen and general contents, large for linen and light bulky items, and a wardrobe or extra-large box for clothes.

Our custom moving boxes are part of the specialist shipping boxes range alongside our custom shipping boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Moving Boxes styles and specifications

The standard construction for custom moving boxes is the regular slotted container (FEFCO 0201). The standard shipping carton: four flaps top and bottom that meet in the middle, closed with tape. It suits shipping, storage and case packs.

Regular Slotted Container (RSC)

Equal-length flaps that meet in the middle, glued at the manufacturer's joint and closed with tape. The lowest cost per cubic inch.

Full Overlap (FOL)

Outer flaps overlap fully for a double layer top and bottom, for heavy or rough-handled loads.

Hand-hole cartons

Die-cut handle holes on the end panels for a safer, easier carry.

Custom Moving Boxes specifications

Box styleRegular slotted container (FEFCO 0201)
Strength grades32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFlexographic 1–2 spot colors, Room and contents panels, Fragile and this-way-up marks, Die-cut handle holes, Water-based ink
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval; rush 5–7 business days
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

32 ECT single-wall kraft
For light and medium contents such as clothes, linen and toys.
44 ECT single-wall kraft
For books, kitchenware and stacking in vans.
Double-wall corrugated
For heavy items and long-term storage.

Printing and finishing options

  • Flexographic 1–2 spot colors
  • Room and contents panels
  • Fragile and this-way-up marks
  • Die-cut handle holes
  • Water-based ink

Who orders custom moving boxes

  • Removal and moving companies
  • Self-storage operators selling boxes at the counter
  • Estate agents and property managers giving moving packs to clients
  • Universities and employers relocating staff or students

Popular sizes for custom moving boxes

The size buyers ask for most is 16 × 12 × 12 in (406 × 305 × 305 mm), used for small: books, tools, heavy items. The smallest size listed here is 16 × 12 × 12 in (406 × 305 × 305 mm) (small: books, tools, heavy items) and the largest is 24 × 20 × 34 in (610 × 508 × 864 mm) (wardrobe box with a hanging rail). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
16 × 12 × 12 in (406 × 305 × 305 mm)Small: books, tools, heavy items
18 × 14 × 12 in (457 × 356 × 305 mm)Medium: kitchen and general contents
18 × 18 × 16 in (457 × 457 × 406 mm)Large: linen, pillows, light bulky items
20 × 20 × 20 in (508 × 508 × 508 mm)Extra-large: lampshades and very light bulky items
24 × 20 × 34 in (610 × 508 × 864 mm)Wardrobe box with a hanging rail

Match the size to the room and the way it will be carried

Pack a sample with the items staff normally group together. Books can make a small carton hard to lift, while bedding may use the whole space without putting the same load on the base. Try lifting and setting down each filled sample at the points your movers use. Check whether the base remains flat when it is carried through a doorway.

Leave enough room for wrap around pieces that should not touch. A plate stack and a glass set may fit the same outer size with different supports. If a part needs a divider, trial it with the box partly filled as well as with a full load.

Keep the room and contents marks visible in a stack

Put the room name on the face that will remain visible in the van or storage bay. A top label can be easy to write during packing and hard to read once another box sits over it. Try a side panel with a clear area for a marker or sticker.

If boxes return to a depot for another move, make it easy to remove or cover the old room label. Check the next label on the same sample and keep it away from a hand hole or taped join. Place the company mark where that label will not hide it.

Try the close and reopen steps before the move

Use the tape or closure your packing team uses and close a filled carton. Make sure loose wrap does not get caught between the flaps. Check whether the box can be opened at the destination without cutting close to the contents.

Set the sample into the intended stack and check whether it can be removed without dragging a neighboring carton. Keep a record of the box size and the items it was tried with so staff can choose it for the next room or job.

How to choose custom moving boxes

  1. Choose three or four sizes

    Small, medium and large cover most moves. Add a wardrobe box if you offer full packing.

  2. Use stronger board for small boxes

    Small boxes are filled with heavy things like books, so they need 44 ECT more than the large ones do.

  3. Print your contact details

    A phone number and website on two sides turn every box into an advert.

  4. Add handle holes

    They make boxes safer to carry and cost very little to add.

See what a box will cost to ship with the dimensional weight calculator. Unfamiliar terms on a quote? The packaging glossary explains them in plain English.

Custom Moving Boxes pricing, production and delivery

Pricing for custom moving boxes starts at $1.35 per box for 1 box at 16 × 12 × 12 in (406 × 305 × 305 mm), in 32 ECT single-wall kraft, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom moving boxes takes 8–12 business days once the proof is approved. If the date is tight, rush production takes 5–7 business days on most corrugated mailer and shipping boxes. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom moving boxes.

FAQ

Custom Moving Boxes FAQ

What sizes of moving box should I order?

Most businesses start with small (16 x 12 x 12 in), medium (18 x 14 x 12 in) and large (18 x 18 x 16 in). Add a wardrobe box if you offer packing services.

How strong are your moving boxes?

32 ECT is carrier-rated up to 65 lb (29 kg) gross, 44 ECT up to 95 lb (43 kg) and 48 ECT double-wall up to 100 lb (45 kg). We recommend 44 ECT for small boxes because they carry the heaviest items.

Can you add handle holes?

Yes. Die-cut handle holes on the end panels are available on any moving box size.

Can you print room and contents panels?

Yes. Room tick boxes, a contents panel and fragile or this-way-up marks can be printed alongside your logo.

What is the minimum order?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.
Copied to clipboard!