Tuck-end outer
Use folded stops to reduce movement of a narrow sealed unit.

Printed Retail Cartons
A vape box is a printed outer carton sized to a finished sealed device or cartridge package. A fitted support can keep the unit clear of the box ends.
From $0.69 per box
Price for 1 box at 1.5 × 1 × 5 in (38 × 25 × 127 mm), in Smooth folding board, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $0.69 | $0.69 |
| 100 | $0.69 | $69.00 |
| 250 | $0.69 | $172.50 |
| 500 | $0.69 | $345.00 |
| 1,000 | $0.69 | $690.00 |
| 2,500 | $0.69 | $1,725.00 |
| 5,000 | $0.69 | $3,450.00 |
Empty outer cartons specified around sealed device packs, with room for current market-specific information.
A refill carton and a boxed device may need different restraints and information panels. Provide finished packed dimensions, expected weight and artwork approved for the sales market. Transport requirements for any batteries are separate from carton fit.
Our custom vape boxes are part of the retail and shelf packaging range alongside our custom product boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom vape boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
Use folded stops to reduce movement of a narrow sealed unit.
Set independent pockets where a sealed kit has separate components.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Exterior print, Matte varnish, Clear variable coding area |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 8–12 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 1.5 × 1 × 5 in (38 × 25 × 127 mm), used for A slim sealed unit. The smallest size listed here is 1.5 × 1 × 5 in (38 × 25 × 127 mm) (A slim sealed unit) and the largest is 3 × 2 × 6 in (76 × 51 × 152 mm) (an outer carton with separate pockets). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 1.5 × 1 × 5 in (38 × 25 × 127 mm) | A slim sealed unit |
| 3 × 2 × 6 in (76 × 51 × 152 mm) | An outer carton with separate pockets |
| 1.25 × 0.75 × 4 in (32 × 19 × 102 mm) | Compact size: A slim sealed unit, travel or sample size |
| 2 × 1.25 × 6.25 in (51 × 32 × 159 mm) | Larger size: A slim sealed unit with an insert or extra room |
Use the closed inner pack you supply, with any wrapper, label or protective sleeve in place. A square seam can take up more space than the device body. Try feeding it into a sample carton and see whether that seam catches on a folded flap. A close fit should still allow staff to load the pack without pressing on one end or twisting it as it goes in.
For a spare or refill pack, take the dimensions independently from the main device pack. A small sealed unit may need a stop that holds it near the opening so customers can reach it. An insert that works for the larger pack can leave an empty space beneath a shorter one. Try removing the shorter pack with the rest of the carton still on the table.
Put the cartons and sealed units in the order the packer will pick them up. If several versions use the same dimensions, reserve a clear identifier on the panel visible at that step. A code printed on the end of the carton may still be read after it is closed. Check that the code does not sit on a tuck tab where it will disappear.
If the box includes a separate leaflet or accessory, give it a space that does not press on the sealed unit. Use the folded leaflet, including its thickest seam, for the trial. Check that the carton stays square when it closes. A pocket below the insert may help keep the two items in order while leaving the pack easy to open from the intended end.
Try the proof with the carton upright and with its short end facing out in a stock tray. Keep long lines on flat panels and give small marks a clear margin around them. We print the text exactly as supplied. Have it reviewed before sending artwork, including wording that changes across versions or goes onto a separate label applied after the box is closed.
A close fitting outer carton can look different after it is loaded. Check whether a panel bows far enough to change the reading angle or whether the glued join covers part of a line. Mark the display face and the intended opening on the proof. Store a folded reference for each pack size so a future change to the inner unit can be checked quickly.
Confirm artwork and whether the product requires specific outer packaging.
Use your carrier’s rules for the actual contents and battery configuration.
No artwork yet? Our packaging design services team builds print-ready files on your dieline. Agencies and resellers can order the same boxes under their own name with white-label packaging.
Pricing for custom vape boxes starts at $0.69 per box for 1 box at 1.5 × 1 × 5 in (38 × 25 × 127 mm), in Smooth folding board, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom vape boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom vape boxes.