Slim single-tube carton
Use end stops to reduce lengthwise movement.

Printed Retail Cartons
A pre-roll box is an empty printed outer carton sized to a sealed tube or a group of sealed tubes. A stop or divider keeps the primary packs aligned.
From $0.69 per box
Price for 1 box at 1 × 1 × 5 in (25 × 25 × 127 mm), in Opaque folding board, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $0.69 | $0.69 |
| 100 | $0.69 | $69.00 |
| 250 | $0.69 | $172.50 |
| 500 | $0.69 | $345.00 |
| 1,000 | $0.69 | $690.00 |
| 2,500 | $0.69 | $1,725.00 |
| 5,000 | $0.69 | $3,450.00 |
Outer cartons for sealed tubes, with dimensions taken across the cap, body and full packed length.
A tube cap often sets the width even when the body is much narrower. Support the tube body so the contents do not rattle against the cap. Where a market requires a specific primary closure or presentation, obtain the approved specification before designing the carton.
Our custom pre-roll boxes are part of the retail and shelf packaging range alongside our custom product boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Paper tube · TUBE
The standard construction for custom pre-roll boxes is the paper tube (TUBE). A wound paperboard cylinder with a lid and a base. It suits tea, cosmetics, apparel and posters.
Use end stops to reduce lengthwise movement.
Group several sealed tubes with separate channels.
| Box style | Paper tube (TUBE) |
|---|---|
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Exterior print, Matte varnish, Clear variable coding area |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 8–12 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 1 × 1 × 5 in (25 × 25 × 127 mm), used for one capped tube after checking the cap. The smallest size listed here is 1 × 1 × 5 in (25 × 25 × 127 mm) (one capped tube after checking the cap) and the largest is 4 × 1.5 × 6 in (102 × 38 × 152 mm) (several sealed tubes in divided channels). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 1 × 1 × 5 in (25 × 25 × 127 mm) | One capped tube after checking the cap |
| 4 × 1.5 × 6 in (102 × 38 × 152 mm) | Several sealed tubes in divided channels |
| 0.75 × 0.75 × 4 in (19 × 19 × 102 mm) | Compact size: one capped tube after checking the cap, travel or sample size |
| 1.25 × 1.25 × 6.25 in (32 × 32 × 159 mm) | Larger size: one capped tube after checking the cap with an insert or extra room |
Put the sealed tube on a flat surface and locate the part of the body that can take support. Some tubes taper near the end and need a folded seat farther up. Measure the widest part with the cap attached. A low collar can steady the body without bearing on the cap. Slide the tube into a sample and see where it comes to rest with the carton held upright.
Try taking the tube out from the intended end. A narrow notch near the body can give the buyer a grip without making them pull on the cap. If the opening uses a drawer, check that the tube does not rise or roll when it comes out of the sleeve. Leave enough space at the far end for the tray to slide without scraping against the tube.
If your line uses long and short tubes, try both in the intended outer carton. A short one can shift past a stop designed for the longer size. A separate insert can fit each tube while the carton stays the same. Put a code on the underside of the insert if the team needs a way to identify it before loading the pack.
Set up the actual packing motion with a trial carton on the table. Check whether the tube can be inserted with the right end facing the opening and without turning the printed face upside down. Keep the closure fully fitted through the trial. After loading, shake the carton gently and look at how the tube sits before approving the placement of the support.
For a drawer version, set the filled tray into the sleeve and check which face identifies the pack when it is closed. If a printed line sits on the tray end, make sure the sleeve does not partly cover it. We print the text exactly as supplied. Have it reviewed before sending artwork, including any lines that sit on a narrow end panel.
If several versions share the same printed face, use an open area for any sticker applied during packing. Try the sticker at its final size and open the carton. It should stay clear of the part that slides or tucks in. Keep the orientation and panel layout with the approved sample so the next version can be checked against the same reference.
Check its largest diameter and finished tube length.
An ordinary tuck box has no tested child-resistant function.
Total an order with the packaging cost calculator, or compare formats on the custom box price list. If products move inside the box, the packaging inserts guide compares card, corrugated, foam and pulp.
Pricing for custom pre-roll boxes starts at $0.69 per box for 1 box at 1 × 1 × 5 in (25 × 25 × 127 mm), in Opaque folding board, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom pre-roll boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom pre-roll boxes.