Beauty and Bath Packaging

Custom Face Mask Boxes

A face mask box is made to fit individually sealed skincare sheet-mask sachets. One construction option is a flat rectangular retail carton with a wide end opening.

Custom Face Mask Boxes price by quantity

From $0.79 per box

Price for 1 box at 5 × 1 × 6.5 in (127 × 25 × 165 mm), in Printed folding paperboard, with full-color digital print on the outside.

QuantityPer boxTotal
1$0.79$0.79
100$0.79$79.00
250$0.79$197.50
500$0.79$395.00
1,000$0.79$790.00
2,500$0.79$1,975.00
5,000$0.79$3,950.00

What are custom face mask boxes?

Custom printed boxes sized for individually sealed skincare sheet-mask sachets.

Measure sealed pouches without compressing the product and keep their edges out of the tuck.

Face mask boxes hold sealed sheet-mask sachets, usually five or ten of one type. The flat carton keeps the sachets flat so the serum stays spread in the mask, and the wide front face is a good display for the brand and the main benefit, such as hydrating or brightening. Beauty retailers often stack these boxes on a shelf, so the end panel should name the product too. Sachet edges are sharp and slippery, so they are kept out of the tuck where they could catch. Many brands sell a mixed box with one sachet of each type, which works if all the sachets share a size. The back usually shows how to use the mask in a few short steps.

Our custom face mask boxes are part of the beauty, lifestyle and apparel packaging range alongside our custom product boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Face Mask Boxes styles and specifications

The standard construction for custom face mask boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.

Flat rectangular retail carton with a wide end opening

Measure sealed pouches without compressing the product and keep their edges out of the tuck.

Custom Face Mask Boxes specifications

Box styleReverse tuck end (RTE)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFull-color exterior print, Matte or gloss finish where compatible with the board and folds
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

Printed folding paperboard
Select board stiffness for the packed item and test the actual crease and flap.

Printing and finishing options

  • Full-color exterior print
  • Matte or gloss finish where compatible with the board and folds

Who orders custom face mask boxes

  • Skincare brands selling sheet masks
  • Beauty retailers with private-label mask ranges

Popular sizes for custom face mask boxes

Every order is cut to your inside dimensions, so treat these sizes as starting points.

Inside size (L × W × D)What fits
5 × 1 × 6.5 in (127 × 25 × 165 mm)Starting point for individually sealed skincare sheet-mask sachets. Confirm fit with a packed sample.
4 × 0.75 × 5.25 in (102 × 19 × 133 mm)Compact size: individually sealed skincare sheet-mask sachets, travel or sample size
6.25 × 1.25 × 8.25 in (159 × 32 × 210 mm)Larger size: individually sealed skincare sheet-mask sachets with an insert or extra room
5 × 1 × 13 in (127 × 25 × 330 mm)Double depth: individually sealed skincare sheet-mask sachets, two layers deep

Fit the stack with the seals in their final position

Place the filled, sealed masks in a stack as they will go into the box. The narrow seals can line up into a raised edge, while the middle may lie flat. Try alternating their direction if that keeps the stack more level. Slide the full stack past the dust flaps and check that no corner gets trapped beneath a fold.

Set the same carton upright and inspect the closed panels. If a tall stack makes one side bow, check whether a fold in the wrapper is responsible before increasing the entire box depth. For a lower count, use a shallow support to keep the packs in reach and away from the tuck.

Give mixed masks a clear order inside

Put the packets in the order you want a buyer to see them. A short printed guide can sit on top if the carton closes without pressure on it. If the packs vary in length, place the shortest one where it can be reached without pulling the entire stack out. Check the sample after the longest mask is removed.

For a set with two groups, a slim separator can keep the packets apart without making the box much taller. Make sure the separator does not rub a sealed edge. A narrow finger opening near the front can help the buyer lift one packet without catching the next one or pushing the divider down.

Fit the artwork to a wide front and a short end

Lay the carton on a shelf with several others stacked over it. See whether the name remains readable on the short edge. If a shop also stands the boxes upright, leave room for a clear name on the main face. We print the text exactly as supplied. Have it reviewed before sending artwork.

Test a full-size proof with the actual filled stack inside. If one panel bows or a sleeve covers the end, adjust the placement of small type. Leave a clear space for any stock label away from the opening. Check which lines remain visible after the final label is applied.

How to choose custom face mask boxes

  1. Measure the packed item

    Measure sealed pouches without compressing the product and keep their edges out of the tuck.

  2. Pack the full count

    Fill a sample with the full number of sachets and check the box closes flat without bulging.

  3. Review a physical sample

    Check the thickest stack at the intended pack count and verify the assembled print orientation.

Want to feel the board and finishes first? Order a free sample pack before you commit. Still deciding? The custom box FAQ answers the questions buyers ask most before ordering.

Custom Face Mask Boxes pricing, production and delivery

Pricing for custom face mask boxes starts at $0.79 per box for 1 box at 5 × 1 × 6.5 in (127 × 25 × 165 mm), in Printed folding paperboard, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom face mask boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom face mask boxes.

Options and guides for custom face mask boxes

FAQ

Custom Face Mask Boxes FAQ

Can a face mask box hold different mask types?

Yes, if the sachets are the same size. List each type on the back so customers know what the mixed box contains.

How do I size a face mask box?

Measure sealed pouches without compressing the product and keep their edges out of the tuck.

What should I check on the proof?

Check the thickest stack at the intended pack count and verify the assembled print orientation.

What does the order include?

The offer is for the printed packaging. Items pictured inside or beside the box illustrate fit.

What is the minimum order for custom face mask boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.
Copied to clipboard!