Round rigid hat box
A traditional round box with lid, for formal hats.

Apparel
A custom hat box is a box sized to hold a hat without crushing its crown or bending its brim. Round rigid boxes suit fedoras and formal hats, while square mailers and cap boxes suit caps and beanies.
From $1.45 per box
Price for 1 box at 8 × 8 × 5 in (203 × 203 × 127 mm), in 1.5–2 mm grayboard, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $1.45 | $1.45 |
| 100 | $1.45 | $145.00 |
| 250 | $1.45 | $362.50 |
| 500 | $1.45 | $725.00 |
| 1,000 | $1.45 | $1,450.00 |
| 2,500 | $1.45 | $3,625.00 |
| 5,000 | $1.45 | $7,250.00 |
A hat keeps its shape only if nothing presses on it, so the box must clear the crown height and the full brim width. Rigid round boxes are traditional for formal hats; corrugated cap mailers with a crown insert suit baseball caps.
Hat boxes are often kept and reused for storage, so a sturdy rigid box with a lid and carry handle extends the brand's life in the customer's home.
Our custom hat boxes are part of the beauty, lifestyle and apparel packaging range alongside our custom product boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Paper tube · TUBE
The standard construction for custom hat boxes is the paper tube (TUBE). A wound paperboard cylinder with a lid and a base. It suits tea, cosmetics, apparel and posters.
A traditional round box with lid, for formal hats.
A corrugated mailer with a crown insert, for caps.
A rigid lid-and-base box with optional carry handle.
| Box style | Paper tube (TUBE) |
|---|---|
| Rigid board | Rigid grayboard, 1,200–2,000 gsm, 1/16–3/32 in (1.5–2.5 mm) thick |
| Wrap | Printed wrap paper, 120–157 gsm |
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Full-color wrap print, Foil stamping, Embossing and debossing, Soft-touch lamination, Spot UV, Ribbon pulls, Custom foam or card inserts |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 12–18 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 8 × 8 × 5 in (203 × 203 × 127 mm), used for baseball caps. The smallest size listed here is 8 × 8 × 5 in (203 × 203 × 127 mm) (baseball caps) and the largest is 10 × 10 × 6 in (254 × 254 × 152 mm) (two caps or a beanie set). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 8 × 8 × 5 in (203 × 203 × 127 mm) | Baseball caps |
| 10 × 10 × 6 in (254 × 254 × 152 mm) | Two caps or a beanie set |
| 14 in dia x 7 in | Fedoras and trilbies |
| 18 in dia x 8 in | Wide-brim and occasion hats |
Place the hat in its intended position and check the rim of the brim from all sides. A shape that clears the base can still touch the wall when the hat shifts. Use a support where the hat can rest without forcing the brim down. Try lifting it from the base with the lid open.
For a cap, check whether the bill sits above the base or lies against it. Leave room for its natural curve and avoid pushing down on the crown. If a cap insert is used, fit it with any tag or wrap already attached. Try a lower crown in the same box before agreeing on a shared size.
A deep round box can be awkward to lift a wide hat from. Try reaching around the brim with the sample on a table. A separate lid can give access from all sides. A shallow support beneath the hat can bring the edge within reach without letting it rub against the lid.
For a box with a carry handle, lift the full sample and check that the hat stays in position. Look at the handle and lid overlap after setting it down. If the box travels inside a shipping carton, check that the handle can be folded away without touching the hat or raising the lid.
Put the sample in the shelf or cabinet where it will be kept. An end or side mark can still be visible when a larger hat box covers the lid. Keep it away from the point where a handle attaches. Apply a trial label and see whether the stock size stays readable.
If the printed design wraps around a round shell, check the join from the angle where the customer first sees the box. A border that meets neatly on the flat proof may look uneven at the seam. Keep the strongest part of the artwork clear of that join and the lid overlap.
Measure the widest brim and the crown height, then add 0.5 in.
A card insert keeps caps and soft hats in shape.
Rigid for presentation and storage, mailers for postage.
Not sure of the size? The box size finder suggests the smallest box that fits your product. New to custom packaging? See how ordering custom boxes works, from proof to delivery.
Pricing for custom hat boxes starts at $1.45 per box for 1 box at 8 × 8 × 5 in (203 × 203 × 127 mm), in 1.5–2 mm grayboard, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom hat boxes takes 12–18 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom hat boxes.