Long presentation box with a retained blade guard
Use the dimensions with the guard on. Hold the handle and sheath so neither can move toward an end wall.

Rigid and Presentation Packaging
A knife box is made to fit a sheathed culinary knife. One construction option is a long presentation box with a retained blade guard.
From $1.49 per box
Price for 1 box at 9 × 2.3 × 1.25 in (229 × 58 × 32 mm), in Wrapped rigid board, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $1.49 | $1.49 |
| 100 | $1.49 | $149.00 |
| 250 | $1.49 | $372.50 |
| 500 | $1.49 | $745.00 |
| 1,000 | $1.49 | $1,490.00 |
| 2,500 | $1.49 | $3,725.00 |
| 5,000 | $1.49 | $7,450.00 |
Custom printed boxes sized for a sheathed culinary knife.
Use the dimensions with the guard on. Hold the handle and sheath so neither can move toward an end wall.
A knife presentation box holds a sheathed kitchen knife for gifting, retail or a cooking school graduation. The long box has an insert that holds both the handle and the blade guard, so the knife cannot slide toward either end in transit. Safety shapes the design: the box is set up so the blade points away from the person opening it and the handle is the first thing they reach for. Knife makers often add a foil logo on the lid, a care card under the knife and a printed insert, and many customers keep the box to store the knife between uses. A magnetic or lift-off lid both work, depending on how the box will be displayed.
Our custom knife boxes are part of the luxury and gift packaging range alongside our custom rigid boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom knife boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
Use the dimensions with the guard on. Hold the handle and sheath so neither can move toward an end wall.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Rigid board | Rigid grayboard, 1,200–2,000 gsm, 1/16–3/32 in (1.5–2.5 mm) thick |
| Wrap | Printed wrap paper, 120–157 gsm |
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Full-color exterior print, Matte or gloss finish where compatible with the board and folds |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 12–18 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
Every order is cut to your inside dimensions, so treat these sizes as starting points.
| Inside size (L × W × D) | What fits |
|---|---|
| 9 × 2.3 × 1.25 in (229 × 58 × 32 mm) | Starting point for a sheathed culinary knife. Confirm fit with a packed sample. |
| 7.25 × 1.75 × 1 in (184 × 44 × 25 mm) | Compact size: a sheathed culinary knife, travel or sample size |
| 11.25 × 3 × 1.5 in (286 × 76 × 38 mm) | Larger size: a sheathed culinary knife with an insert or extra room |
| 9 × 2.25 × 2.5 in (229 × 57 × 64 mm) | Double depth: a sheathed culinary knife, two layers deep |
Use the finished knife with its sheath or blade guard fitted. Measure the width at the guard opening and at the thickest part of the handle. An insert can locate the handle without using the end of the guard as a stop. Check that the handle stays clear of the side wall and that the sheath cannot slide out of its support.
For a set, measure each guarded knife separately. Handles may need different depths even when the blades are similar. Fit all parts into the tray and check that the insert sits flat before closing the lid.
Set the sample on a counter and open the lid from the intended side. The handle should be easy to reach while the guarded end remains supported. A small notch can give the fingers space without loosening the fit along the rest of the handle.
Put any care card beside the knife or in a pocket away from the sheath. Check that the card can be removed without shifting the knife. If a strap holds the tray, try releasing it while the sample stays flat.
Put a folded proof beside the finished knife to check how the artwork frames the contents. Keep any main mark clear of a magnetic flap or the overlap of a separate lid. An end label can identify blade style while several boxes sit in a stock drawer.
Fit the closed presentation box into the shipping carton if one will be used. Make sure it can be lifted by the base without pulling on a decorative lid. Keep a reference of the guard, insert and loading position with the approved print.
Use the dimensions with the guard on. Hold the handle and sheath so neither can move toward an end wall.
Hand a packed sample to someone and check that they lift the knife by the handle, with the blade away from them.
Check that the intended opening direction keeps the guarded blade away from the user.
Not sure of the size? The box size finder suggests the smallest box that fits your product. New to custom packaging? See how ordering custom boxes works, from proof to delivery.
Pricing for custom knife boxes starts at $1.49 per box for 1 box at 9 × 2.3 × 1.25 in (229 × 58 × 32 mm), in Wrapped rigid board, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom knife boxes takes 12–18 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom knife boxes.