Shipping & Transit

Custom Multi-Depth Boxes

A custom multi-depth box is a shipping box with extra score lines around its walls. Packers cut the corners down to a score line and fold the flaps there, which turns one box into two or three shallower sizes and removes empty space from smaller orders.

Custom Multi-Depth Boxes price by quantity

From $0.95 per box

Price for 1 box at 8 × 8 × 8 in (203 × 203 × 203 mm) (scored 6, 4), in 32 ECT single-wall kraft, with full-color digital print on the outside.

QuantityPer boxTotal
1$0.95$0.95
100$0.95$95.00
250$0.95$237.50
500$0.95$475.00
1,000$0.95$950.00
2,500$0.95$2,375.00
5,000$0.95$4,750.00

What are custom multi-depth boxes?

Most ecommerce businesses need more box sizes than they want to stock. A multi-depth box solves part of that: a 12 x 12 x 12 in box scored at 10, 8 and 6 in covers four depths with one item in your inventory.

Cutting the box down to fit the order reduces void fill and dimensional weight. A box cut from 12 in deep to 6 in deep halves its dimensional weight, which can move a parcel into a cheaper price band.

Your print goes where it stays visible at every depth: on the top flaps and the upper part of the side panels when the box is used at full depth, and repeated lower down if you want branding on cut-down boxes too.

Our custom multi-depth boxes are part of the specialist shipping boxes range alongside our custom shipping boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box. Also part of our ecommerce packaging and sustainable packaging range.

Custom Multi-Depth Boxes styles and specifications

The standard construction for custom multi-depth boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.

RSC with 2 score depths

Full depth plus one cut-down depth. The simplest version, easy for packers to learn.

RSC with 3–4 score depths

Scores every 2 in or so, for the widest range of order sizes from one box.

Full Overlap multi-depth

Overlapping flaps for extra strength once the box has been cut down.

Custom Multi-Depth Boxes specifications

Box styleReverse tuck end (RTE)
Strength grades32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFlexographic 1–2 spot colors, Full-color digital print, Score-line depth markings, Water-based ink
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

32 ECT single-wall kraft
Standard grade, carrier-rated up to 65 lb (29 kg) gross.
44 ECT single-wall kraft
Extra strength, useful because cut-down boxes lose some corner stiffness.
White-top kraft
A white outer face for brighter print.

Printing and finishing options

  • Flexographic 1–2 spot colors
  • Full-color digital print
  • Score-line depth markings
  • Water-based ink

Who orders custom multi-depth boxes

  • Ecommerce sellers with orders of many different sizes
  • 3PLs that want fewer box SKUs on the packing line
  • Small businesses with limited storage space
  • Brands trying to cut void fill and dimensional weight

Popular sizes for custom multi-depth boxes

The size buyers ask for most is 8 × 8 × 8 in (203 × 203 × 203 mm) (scored 6, 4), used for small accessories through to gift sets. The smallest size listed here is 8 × 8 × 8 in (203 × 203 × 203 mm) (scored 6, 4) (small accessories through to gift sets) and the largest is 16 × 12 × 12 in (406 × 305 × 305 mm) (scored 10, 8, 6) (large and bulky orders). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
8 × 8 × 8 in (203 × 203 × 203 mm) (scored 6, 4)Small accessories through to gift sets
10 × 10 × 10 in (254 × 254 × 254 mm) (scored 8, 6, 4)Apparel and homeware orders of mixed size
12 × 12 × 12 in (305 × 305 × 305 mm) (scored 10, 8, 6)The most flexible all-round size
14 × 10 × 10 in (356 × 254 × 254 mm) (scored 8, 6)Longer products and bundles
16 × 12 × 12 in (406 × 305 × 305 mm) (scored 10, 8, 6)Large and bulky orders

Pick the cut line with a filled carton in front of you

Load the product and its protection before deciding which score to use. Look at the highest point of the packed order, including a folded insert or pouch seal. Leave enough room for the flap to turn over it. A lower score can work well on the next order if its top pad sits flat.

Try the shortest and tallest setups before approving the blank. Check how the scored walls fold when the carton is filled to each depth. If one position is hard to identify, mark the line on the packing reference and verify it against a sample.

Set up the packing bench for the depth change

Ask the person who prepares parcels to close a sample at each depth. Find where they hold the carton and how they fold or cut the corners with the contents already inside. Leave space for that step at the bench. Keep any work near an exposed product clear of its surface.

Check where the flaps meet at the lower positions. If a flap edge sits over the thickest part of the pack, try a different pad or a different score. Close the carton with the intended tape and see whether the label will still lie on an uninterrupted face.

Put permanent marks below any area that changes

Use a folded proof at the lowest depth to see which parts of the side remain visible. Put the product or size identifier in a spot that is readable at every depth you use. Keep any note about the score positions separate from a mark the customer needs to see.

Test how the shorter and taller versions sit in the staging area. A label face that is clear on a tall carton may be hidden when the shorter one is stacked. Keep a photo of each approved closure and pack layout near the blank stock.

How to choose custom multi-depth boxes

  1. List your common order sizes

    Choose the full size for your largest common order, then place scores at the depths of the others.

  2. Don't over-score

    Every score slightly weakens the walls. Two or three depths suit most businesses.

  3. Place the logo high

    Keep the main logo on the top flaps and upper sides so it survives a cut-down.

  4. Give packers a cutter

    A safety box cutter makes cutting down fast and neat.

Agencies and resellers can order the same boxes under their own name with white-label packaging. Not sure of the size? The box size finder suggests the smallest box that fits your product.

Custom Multi-Depth Boxes pricing, production and delivery

Pricing for custom multi-depth boxes starts at $0.95 per box for 1 box at 8 × 8 × 8 in (203 × 203 × 203 mm) (scored 6, 4), in 32 ECT single-wall kraft, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom multi-depth boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom multi-depth boxes.

Options and guides for custom multi-depth boxes

FAQ

Custom Multi-Depth Boxes FAQ

How does a multi-depth box work?

The walls have extra score lines. The packer cuts the four corners down to a score line, folds the flaps along it and tapes the box closed at the shallower depth.

Is a cut-down box weaker?

Slightly at the corners, because of the cuts. For heavy products choose 44 ECT board or a full overlap style.

Will my logo still show after cutting down?

Yes, if it is printed on the top flaps. We can also repeat the logo lower on the side panels.

Can I choose where the scores go?

Yes. Tell us the depths you use most and we will place the scores at those depths.

What is the minimum order?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.
Copied to clipboard!