Shipping & Transit

Custom White Shipping Boxes

A custom white shipping box is a corrugated shipping carton made with a white outer liner instead of brown kraft. The white face makes printed colors brighter and truer, so logos and brand colors look closer to your artwork than they do on kraft.

Custom White Shipping Boxes price by quantity

From $0.92 per box

Price for 1 box at 8 × 6 × 4 in (203 × 152 × 102 mm), in White-top 32 ECT single-wall, with full-color digital print on the outside.

QuantityPer boxTotal
1$0.92$0.92
100$0.92$92.00
250$0.92$230.00
500$0.92$460.00
1,000$0.92$920.00
2,500$0.92$2,300.00
5,000$0.92$4,600.00

What are custom white shipping boxes?

Ink on brown kraft always picks up the color of the board underneath: reds turn brick, blues turn navy and light colors almost disappear. A white outer liner removes that problem, which is why brands with a light or color-critical logo usually choose white over kraft.

The strength is the same as a kraft box of the same grade. Only the outer liner changes, so a 32 ECT white box carries the same load and stacks the same way as a 32 ECT kraft box.

White boxes also hide less. Scuffs and dirt from the carrier network show more on white, so for long or rough routes a light varnish or a darker print band around the lower edge keeps the box looking clean on arrival.

Our custom white shipping boxes are part of the specialist shipping boxes range alongside our custom shipping boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box. Also part of our ecommerce packaging range.

Custom White Shipping Boxes styles and specifications

The standard construction for custom white shipping boxes is the regular slotted container (FEFCO 0201). The standard shipping carton: four flaps top and bottom that meet in the middle, closed with tape. It suits shipping, storage and case packs.

Regular Slotted Container (RSC)

Equal-length flaps that meet in the middle, glued at the manufacturer's joint and closed with tape. The lowest cost per cubic inch.

Full Overlap (FOL)

Outer flaps overlap fully for a double layer top and bottom, for heavy or rough-handled loads.

Custom White Shipping Boxes specifications

Box styleRegular slotted container (FEFCO 0201)
Strength grades32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFull-color digital print, Flexographic 1–3 spot colors, Inside print, Matte varnish, Water-based ink
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval; rush 5–7 business days
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

White-top 32 ECT single-wall
White outer liner over a kraft core. The standard choice, carrier-rated up to 65 lb (29 kg) gross.
White-top 44 ECT single-wall
Stronger stacking strength for heavier products or pallet storage.
Bleached white both sides
White inside and out, for a clean look when the customer opens the box.

Printing and finishing options

  • Full-color digital print
  • Flexographic 1–3 spot colors
  • Inside print
  • Matte varnish
  • Water-based ink

Who orders custom white shipping boxes

  • Brands whose logo uses light, bright or exact colors
  • Beauty, wellness and lifestyle brands that want a clean, premium look
  • Ecommerce sellers moving up from plain kraft boxes
  • Retailers whose shipping boxes are also seen in store

Popular sizes for custom white shipping boxes

The size buyers ask for most is 8 × 6 × 4 in (203 × 152 × 102 mm), used for single small products, cosmetics, accessories. The smallest size listed here is 8 × 6 × 4 in (203 × 152 × 102 mm) (single small products, cosmetics, accessories) and the largest is 16 × 12 × 8 in (406 × 305 × 203 mm) (larger bundles and small appliances). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
8 × 6 × 4 in (203 × 152 × 102 mm)Single small products, cosmetics, accessories
10 × 8 × 6 in (254 × 203 × 152 mm)Apparel, candles, gift sets
12 × 9 × 6 in (305 × 229 × 152 mm)Multi-item orders
14 × 10 × 6 in (356 × 254 × 152 mm)Bulkier apparel and homeware
16 × 12 × 8 in (406 × 305 × 203 mm)Larger bundles and small appliances

Choose where white needs to remain visible

Set a packed sample next to the carton and labels you use today. A white face can give a dark mark a clear background, while an address label may cover the same panel. Put the main print where it stays visible on a closed parcel. Check the box at the receiving point and again after opening.

Use a folded proof if the design runs along a taped edge. Clear or brown tape can change how a white panel reads near the seam. Try it on the real board and decide whether the mark or border needs to move.

Inspect the contact points after normal handling

Stack the sample the way staff stage parcels. Check the lower edges and the places where hands or neighboring boxes touch it. A broad plain surface and a printed band can show marks differently. Use the actual packing and carrying steps to see which places need attention.

If a store applies a label to the end, check how it sits on the finished board. Leave room for it to lie flat. Try opening the carton after labeling it so a sticker does not get in the way of the flap or tear into the printed area.

Proof the color beside the product

Put the finished retail pack and the outside shipping carton together under the same light. A light color may look different from the shade on a coated label. Check the faces people see together and keep a folded reference for future orders.

If several sizes share one design, set them together with their labels attached. Place the main mark where it remains readable even on the narrowest face. Check the corner folds on the smallest sample before approving artwork for the full range.

How to choose custom white shipping boxes

  1. Check your logo colors

    If your logo has light or exact brand colors, white is worth it. Dark single-color logos print well on kraft for less.

  2. Decide on white inside

    White-top boxes are brown inside. Choose bleached white both sides if the inside is part of the unboxing.

  3. Protect against scuffs

    For long or rough routes, add a varnish or a darker print band near the base.

  4. Pick the board by weight

    32 ECT up to 65 lb (29 kg) gross, 44 ECT up to 95 lb (43 kg) or for pallet storage.

Once your design is approved, custom box subscriptions keep the same boxes arriving on a schedule without re-proofing. Handling marks such as this-way-up or fragile can be printed next to your logo; see shipping box symbols.

Custom White Shipping Boxes pricing, production and delivery

Pricing for custom white shipping boxes starts at $0.92 per box for 1 box at 8 × 6 × 4 in (203 × 152 × 102 mm), in White-top 32 ECT single-wall, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom white shipping boxes takes 8–12 business days once the proof is approved. If the date is tight, rush production takes 5–7 business days on most corrugated mailer and shipping boxes. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom white shipping boxes.

Options and guides for custom white shipping boxes

FAQ

Custom White Shipping Boxes FAQ

Are white shipping boxes weaker than kraft boxes?

No. A white box uses a white outer liner over the same kind of corrugated core, so a 32 ECT white box has the same strength as a 32 ECT kraft box.

Are white boxes white on the inside?

White-top boxes are white outside and brown inside. If you want white inside as well, choose bleached white on both sides.

Do white boxes cost more?

Slightly. The white liner costs more than kraft, so white boxes start at a little more per box than the same kraft size.

Are white shipping boxes recyclable?

Yes. White-top corrugated goes in the same paper and cardboard recycling as kraft boxes.

What is the minimum order?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.
Copied to clipboard!