Branding & Marketing

Custom Promotional Boxes

A custom promotional box is a printed box built around a marketing moment rather than a retail shelf: a product launch, a trade show handout, a press or influencer kit, or a client thank-you. It carries the campaign artwork and holds the items in a set position, so the box itself becomes part of the message.

Custom Promotional Boxes price by quantity

From $1.59 per box

Price for 1 box at 6 × 4 × 2 in (152 × 102 × 51 mm), in SBS paperboard 300–400 gsm, with full-color digital print on the outside.

QuantityPer boxTotal
1$1.59$1.59
100$1.59$159.00
250$1.59$397.50
500$1.59$795.00
1,000$1.59$1,590.00
2,500$1.59$3,975.00
5,000$1.59$7,950.00

What are custom promotional boxes?

Promotional boxes are judged in the first few seconds. The person receiving one did not buy it, so the outside has to explain why it matters and the inside has to reward opening it. That usually means a strong single message on the lid, a short line printed inside, and an insert that shows every item at once rather than a pile of loose products.

Most promotional boxes are folding cartons or two-piece paperboard boxes, because they print well, ship flat and keep the cost per kit down when hundreds go out at once. A rigid box makes sense when the kit goes to a small list of high-value contacts and is meant to be kept on a desk afterward.

Timing drives the specification. A campaign has a fixed date, so choose a board, finish and construction that fit the production time rather than adding finishes that push the run past the launch. One foil or one spot UV detail on the lid gives most of the effect of several finishes.

Think about what happens after the event. A box that is still useful, such as a storage box for a desk or a case for a product sample, keeps the brand in view for weeks. A box that is opened and thrown away should be easy to flatten and recycle.

Our custom promotional boxes are part of the branding and small business packaging range alongside our custom printed boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box. Also part of our retail packaging and luxury packaging range.

Custom Promotional Boxes styles and specifications

The standard construction for custom promotional boxes is the two-piece lid and base (2PC). A separate lid slides down over a base; made from rigid grayboard or folding board. It suits gifts, apparel and presentation sets.

Two-piece lid and base

A separate lid lifts off to reveal the whole kit at once. It is the most common promotional format and suits kits with several items.

Tuck end carton

A single folding carton for one sample or one product. It is the lowest-cost option for large handouts at events.

Sleeve and tray

A printed sleeve slides off a tray, so the campaign artwork can change while the tray stays the same across several campaigns.

Rigid presentation box

A rigid box for small, high-value send-outs that the recipient is expected to keep.

Custom Promotional Boxes specifications

Box styleTwo-piece lid and base (2PC)
PaperboardSBS paperboard, 300–400 gsm (14–24 pt)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFull-color CMYK, Pantone spot colors, Matte or gloss lamination, Soft-touch lamination, Foil stamping, Embossing and debossing, Spot UV, Window patching
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

SBS paperboard 300–400 gsm
Solid bleached board with a bright white surface for sharp, accurate full-color print.
Kraft paperboard
Unbleached brown board with a natural look; prints best with one or two strong colors.
Recycled CCNB board
Clay-coated board made from recycled fiber, a lower-cost option for retail shelves.

Printing and finishing options

  • Full-color CMYK
  • Pantone spot colors
  • Matte or gloss lamination
  • Soft-touch lamination
  • Foil stamping
  • Embossing and debossing
  • Spot UV
  • Window patching

Who orders custom promotional boxes

  • Marketing teams running product launches and campaigns
  • Event and trade show teams handing out kits at a booth
  • Agencies sending press and influencer mailers for clients
  • Companies sending client and employee thank-you gifts

Popular sizes for custom promotional boxes

The size buyers ask for most is 6 × 4 × 2 in (152 × 102 × 51 mm), used for A single product sample with a printed card slot. The smallest size listed here is 6 × 4 × 2 in (152 × 102 × 51 mm) (A single product sample with a printed card slot) and the largest is 12 × 9 × 4 in (305 × 229 × 102 mm) (A press or influencer kit with several products). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
6 × 4 × 2 in (152 × 102 × 51 mm)A single product sample with a printed card slot
9 × 6 × 3 in (229 × 152 × 76 mm)A small launch kit with two or three items
12 × 9 × 4 in (305 × 229 × 102 mm)A press or influencer kit with several products
4 × 4 × 4 in (102 × 102 × 102 mm)A cube for a single giveaway item at a trade show

Make the kit work in the place it is handed out

At an event table, staff may need to take the box from a stack and hand it over without setting it down. Give them a clear grip and a visible way to tell versions apart.

For a mailed kit, set the shipping label on a packed sample. Keep the campaign mark clear of the label and any tape needed for the trip.

Check the fit with a late change to the contents

Try the planned tray with the smallest and largest items you expect to use. A short item can disappear into a deep well while a tall one blocks the lid.

If a card or sample may be swapped before the event, give it a separate position. Check that the substitute can go in without disturbing the rest of the pack.

Keep the campaign date off parts you want to reuse

Put a temporary date or location on a card or removable band if the main box will serve later events.

Try taking the band off without catching a flap. Store the approved box and insert together so the next event can use the same fit.

How to choose custom promotional boxes

  1. Lay out the kit first

    Put every item on a table in the arrangement you want the recipient to see, then measure the full layout including gaps between items. That layout sets the inside size and the insert.

  2. Work back from the event date

    Count back from the date the kits must be packed: shipping, production, proof and artwork time. Choose finishes that fit that window rather than finishes that need a longer run.

  3. Write one message for the lid

    A promotional box is read in a moment. One headline and the logo on the lid work better than a full product story; put the detail on a card or inside the lid.

  4. Plan the packing

    If a team will pack hundreds of kits by hand, choose a construction that folds quickly and an insert that only fits one way, so every kit looks the same.

New to custom packaging? See how ordering custom boxes works, from proof to delivery. If your launch date is close, rush production shortens the production time on most corrugated formats.

Custom Promotional Boxes pricing, production and delivery

Pricing for custom promotional boxes starts at $1.59 per box for 1 box at 6 × 4 × 2 in (152 × 102 × 51 mm), in SBS paperboard 300–400 gsm, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom promotional boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom promotional boxes.

Options and guides for custom promotional boxes

FAQ

Custom Promotional Boxes FAQ

What is a promotional box?

A printed box made for a marketing purpose, such as a product launch, event giveaway, press kit or client gift, rather than for retail sale.

Can each promotional box hold several different items?

Yes. An insert is cut with a space for each item, so the kit arrives in the arrangement you designed.

Can you print a message inside the lid?

Yes. Inside printing can carry a thank-you line, instructions or a QR code that leads to the campaign page.

Which construction is cheapest for a large giveaway?

A single tuck end carton is usually the lowest-cost option for one item. A two-piece box costs more but suits kits with several products.

What is the minimum order for custom promotional boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.
Copied to clipboard!