Retail Box Structures

Custom Spark Plug Boxes

A spark plug box is made to fit an individually packed automotive spark plug. One construction option is a slim tuck carton with a paperboard end stop.

Custom Spark Plug Boxes price by quantity

From $0.79 per box

Price for 1 box at 1.25 × 1.25 × 4 in (32 × 32 × 102 mm), in Printed folding paperboard, with full-color digital print on the outside.

QuantityPer boxTotal
1$0.79$0.79
100$0.79$79.00
250$0.79$197.50
500$0.79$395.00
1,000$0.79$790.00
2,500$0.79$1,975.00
5,000$0.79$3,950.00

What are custom spark plug boxes?

Custom printed boxes sized for an individually packed automotive spark plug.

Support the hex or shoulder and leave clearance around the electrode and ceramic tip.

Spark plugs are sold by part number, and the person buying one is usually checking a fitment chart. The slim carton keeps the part number, thread size and gap on a clear end panel so it can be read from a parts store drawer or a shelf of identical boxes. Inside, a paperboard stop holds the plug by its hex so the ceramic and electrode never knock against the flap. Workshops buy plugs in sets, so a multi-pack carton with dividers in the same style is common. Barcodes need a flat, uncoated patch where the scanner reads reliably.

Our custom spark plug boxes are part of the retail and shelf packaging range alongside our custom product boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Spark Plug Boxes styles and specifications

The standard construction for custom spark plug boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.

Slim tuck carton with a paperboard end stop

Support the hex or shoulder and leave clearance around the electrode and ceramic tip.

Custom Spark Plug Boxes specifications

Box styleReverse tuck end (RTE)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFull-color exterior print, Matte or gloss finish where compatible with the board and folds
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

Printed folding paperboard
Select board stiffness for the packed item and test the actual crease and flap.

Printing and finishing options

  • Full-color exterior print
  • Matte or gloss finish where compatible with the board and folds

Who orders custom spark plug boxes

  • Automotive parts brands
  • Distributors relabeling spark plugs and ignition parts

Popular sizes for custom spark plug boxes

Every order is cut to your inside dimensions, so treat these sizes as starting points.

Inside size (L × W × D)What fits
1.25 × 1.25 × 4 in (32 × 32 × 102 mm)Starting point for an individually packed automotive spark plug. Confirm fit with a packed sample.
1 × 1 × 3.25 in (25 × 25 × 83 mm)Compact size: an individually packed automotive spark plug, travel or sample size
1.5 × 1.5 × 5 in (38 × 38 × 127 mm)Larger size: an individually packed automotive spark plug with an insert or extra room
1.25 × 1.25 × 8 in (32 × 32 × 203 mm)Double depth: an individually packed automotive spark plug, two layers deep

Make the holder rest on the metal body

Place the plug in its intended position and mark where the insert meets the metal shoulder. Keep room around the electrode and the ceramic, including any protector the plug will carry. Try loading it through the open end without using the tip to push a flap out of the way.

Close a filled sample and look through the other end if it is still accessible. The stop should remain in place while the tuck passes. Check another plug length if it uses the same outside box. A shorter plug may need a separate stop rather than extra pressure at the tip.

Fit workshop sets with a clear count

Put the full set into the divider and try removing one plug while the others stay in place. A slot that grips the body can still be easy to lift from if there is room for a finger. Keep the ceramic and electrode away from neighboring parts and cut edges.

If a service kit contains more than one part number, give each position a clear identifier. Use a sample with all the plugs already packed to check the printed order. Make sure a loose card cannot slide beneath the divider when the carton is turned.

Read the end label with the box in a drawer

Put the folded carton among the stock it will share. Check that staff can read the part number without turning the box over. Leave room for the actual label and a clear area around the code. Test the label after opening the box once.

Keep the approved carton and support with a note of the plug used for the fitting. If the shape of the body or the terminal changes, fit the new part before ordering the same box again.

How to choose custom spark plug boxes

  1. Measure the packed item

    Support the hex or shoulder and leave clearance around the electrode and ceramic tip.

  2. Scan the barcode on a folded sample

    Check that the barcode on the end panel scans after the carton is folded and stacked with others.

  3. Review a physical sample

    Check the smallest part number variant for axial movement and keep part IDs clear of folds.

Handling marks such as this-way-up or fragile can be printed next to your logo; see shipping box symbols. See what a box will cost to ship with the dimensional weight calculator.

Custom Spark Plug Boxes pricing, production and delivery

Pricing for custom spark plug boxes starts at $0.79 per box for 1 box at 1.25 × 1.25 × 4 in (32 × 32 × 102 mm), in Printed folding paperboard, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom spark plug boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom spark plug boxes.

FAQ

Custom Spark Plug Boxes FAQ

Can the box show the part number on more than one panel?

Yes, and it helps in a drawer. Many brands put the part number on both end panels and the front, so the box reads correctly whichever way it is stored.

How do I size a spark plug box?

Support the hex or shoulder and leave clearance around the electrode and ceramic tip.

What should I check on the proof?

Check the smallest part number variant for axial movement and keep part IDs clear of folds.

What does the order include?

The offer is for the printed packaging. Items pictured inside or beside the box illustrate fit.

What is the minimum order for custom spark plug boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.
Copied to clipboard!