Shipping and Moving Boxes

Custom Vinyl Record Mailer Boxes

A vinyl record mailer box is made to fit a sleeved vinyl record. One construction option is a shallow corrugated fold-around mailer with protected corners.

Custom Vinyl Record Mailer Boxes price by quantity

From $1.49 per box

Price for 1 box at 12.5 × 12.5 × 1 in (318 × 318 × 25 mm), in Printed folding paperboard, with full-color digital print on the outside.

QuantityPer boxTotal
1$1.49$1.49
100$1.49$149.00
250$1.49$372.50
500$1.49$745.00
1,000$1.49$1,490.00
2,500$1.49$3,725.00
5,000$1.49$7,450.00

What are custom vinyl record mailer boxes?

Custom printed boxes sized for a sleeved vinyl record.

Measure the outer sleeve including its seams. Leave corner clearance and keep pressure off the center of the record.

A vinyl record mailer is a flat corrugated box that folds around a sleeved record to protect it in the mail. Records are easily warped by pressure and cracked at the edge by impact, so the mailer holds the record flat, adds extra board at the corners and keeps the center free of pressure. Record labels, bands and independent shops use these mailers for online orders and pre-orders, when the arrival of a new album is a moment fans share. Printing the label's logo or album artwork on the outside, or a message inside the lid, adds to that. Postal handling is rough, so test the mailer on its edge as well as flat before ordering a full run.

Our custom vinyl record mailer boxes are part of the shipping and ecommerce boxes range alongside our custom shipping boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Vinyl Record Mailer Boxes styles and specifications

Paper tube · TUBE

The standard construction for custom vinyl record mailer boxes is the paper tube (TUBE). A wound paperboard cylinder with a lid and a base. It suits tea, cosmetics, apparel and posters.

Shallow corrugated fold-around mailer with protected corners

Measure the outer sleeve including its seams. Leave corner clearance and keep pressure off the center of the record.

Custom Vinyl Record Mailer Boxes specifications

Box stylePaper tube (TUBE)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFull-color exterior print, Matte or gloss finish where compatible with the board and folds
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

Printed folding paperboard
Select board stiffness for the packed item and test the actual crease and flap.

Printing and finishing options

  • Full-color exterior print
  • Matte or gloss finish where compatible with the board and folds

Who orders custom vinyl record mailer boxes

  • Record labels and bands selling direct to fans
  • Independent record shops selling online

Popular sizes for custom vinyl record mailer boxes

Every order is cut to your inside dimensions, so treat these sizes as starting points.

Inside size (L × W × D)What fits
12.5 × 12.5 × 1 in (318 × 318 × 25 mm)Starting point for a sleeved vinyl record. Confirm fit with a packed sample.
10 × 10 × 0.75 in (254 × 254 × 19 mm)Compact size: a sleeved vinyl record, travel or sample size
15.75 × 15.75 × 1.25 in (400 × 400 × 32 mm)Larger size: a sleeved vinyl record with an insert or extra room
12.5 × 12.5 × 2 in (318 × 318 × 51 mm)Double depth: a sleeved vinyl record, two layers deep

Check the complete sleeve before choosing the fold

Measure the record with the jacket, any outer sleeve and the inserts already in place. A thick folded jacket or a corner seam can make the pack uneven. Fit it between the end supports while keeping the broad center free of pressure.

Try a single record and a double set if both use the same mailer. The thicker pack can pull the front tuck upward. The thinner one may need a pad at an edge so it cannot move into the hinge.

Give the buyer a safe place to start opening

Put the finished mailer on a table and lift the intended tab. Check where a buyer might place a blade if they do not see the opening point. Keep that area clear of the edge of the jacket. A clear tab or short note can help guide the first move.

Try sliding out the sleeved record without pulling on a printed corner. Put any signed card or extra insert where it can be found without putting pressure on the disc. Close the box with every piece in place to check the height.

Fit the parcel label without hiding the release

Put the shipping label on the packed sample. Keep it clear of the tuck or tear line. For a record label with several releases, add a short code on a face staff can read while the mailers are stacked.

Check the closed mailer on its long and short edges. Look for a corner pad that shifts or a closure that catches on the sleeve. Keep a sample with the jacket sizes and pack order recorded for later releases.

How to choose custom vinyl record mailer boxes

  1. Measure the packed item

    Measure the outer sleeve including its seams. Leave corner clearance and keep pressure off the center of the record.

  2. Ship a sample on its edge

    Mail a packed sample to yourself or drop it on its edge and check the record, sleeve and corners on arrival.

  3. Review a physical sample

    Test the loaded parcel flat and on edge to check that the sleeve stays restrained.

Want to feel the board and finishes first? Order a free sample pack before you commit. Still deciding? The custom box FAQ answers the questions buyers ask most before ordering.

Custom Vinyl Record Mailer Boxes pricing, production and delivery

Pricing for custom vinyl record mailer boxes starts at $1.49 per box for 1 box at 12.5 × 12.5 × 1 in (318 × 318 × 25 mm), in Printed folding paperboard, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom vinyl record mailer boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom vinyl record mailer boxes.

Options and guides for custom vinyl record mailer boxes

FAQ

Custom Vinyl Record Mailer Boxes FAQ

Can a vinyl mailer hold two records?

Yes. We increase the depth for a double album or two sleeves and keep the same corner protection.

How do I size a vinyl record mailer box?

Measure the outer sleeve including its seams. Leave corner clearance and keep pressure off the center of the record.

What should I check on the proof?

Test the loaded parcel flat and on edge to check that the sleeve stays restrained.

What does the order include?

The offer is for the printed packaging. Items pictured inside or beside the box illustrate fit.

What is the minimum order for custom vinyl record mailer boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.
Copied to clipboard!