Shipping & Transit

Plain Shipping Boxes

A plain shipping box is an unprinted corrugated regular slotted carton, made to your exact inside dimensions in kraft or white board. You get a box that fits your product without paying for print, which makes it the lowest-cost way to stop shipping empty space.

Plain Shipping Boxes price by quantity

From $0.59 per box

Price for 1 box at 6 × 6 × 6 in (152 × 152 × 152 mm), in 32 ECT single-wall kraft, with full-color digital print on the outside.

QuantityPer boxTotal
1$0.59$0.59
100$0.59$59.00
250$0.59$147.50
500$0.59$295.00
1,000$0.59$590.00
2,500$0.59$1,475.00
5,000$0.59$2,950.00

What are plain shipping boxes?

Stock boxes come in a fixed set of sizes, so most products ship in a box that is slightly too big. A plain box cut to your size removes that gap, which reduces void fill and dimensional weight on every parcel.

Plain boxes are also the easiest way to start: no artwork, no proof, and a shorter production time. When you are ready to add your logo, the same size can be printed with nothing else changing.

Many brands use plain shippers for wholesale and inbound stock and printed boxes for orders that go to customers. Ordering both sizes together in one run keeps the price per box down.

Our plain shipping boxes are part of the specialist shipping boxes range alongside our custom shipping boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box. Also part of our sustainable packaging range.

Plain Shipping Boxes styles and specifications

The standard construction for plain shipping boxes is the regular slotted container (FEFCO 0201). The standard shipping carton: four flaps top and bottom that meet in the middle, closed with tape. It suits shipping, storage and case packs.

Regular Slotted Container (RSC)

Equal-length flaps that meet in the middle, glued at the manufacturer's joint and closed with tape. The lowest cost per cubic inch.

Full Overlap (FOL)

Outer flaps overlap fully for a double layer top and bottom, for heavy or rough-handled loads.

Plain Shipping Boxes specifications

Box styleRegular slotted container (FEFCO 0201)
Strength grades32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxUnprinted, Optional fragile or this-way-up marks, Optional multi-depth scoring
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time5–10 business days after artwork approval; rush 5–7 business days
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

32 ECT single-wall kraft
Standard grade, carrier-rated up to 65 lb (29 kg) gross.
44 ECT single-wall kraft
Stronger stacking for heavy or palletized loads.
White-top kraft
A clean white face if you add labels or want a lighter look.

Printing and finishing options

  • Unprinted
  • Optional fragile or this-way-up marks
  • Optional multi-depth scoring

Who orders plain shipping boxes

  • New ecommerce brands that need the right size before they need print
  • Wholesalers and distributors shipping case packs
  • Businesses using branded tape or labels instead of printed boxes
  • 3PLs stocking extra sizes for their clients

Popular sizes for plain shipping boxes

The size buyers ask for most is 6 × 6 × 6 in (152 × 152 × 152 mm), used for small products and samples. The smallest size listed here is 6 × 6 × 6 in (152 × 152 × 152 mm) (small products and samples) and the largest is 18 × 14 × 12 in (457 × 356 × 305 mm) (bulk and inbound stock). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
6 × 6 × 6 in (152 × 152 × 152 mm)Small products and samples
10 × 8 × 6 in (254 × 203 × 152 mm)Everyday ecommerce orders
12 × 12 × 12 in (305 × 305 × 305 mm)Mixed and bulky orders
16 × 12 × 12 in (406 × 305 × 305 mm)Case packs and wholesale
18 × 14 × 12 in (457 × 356 × 305 mm)Bulk and inbound stock

Measure the order after adding the protective layers

Build a complete parcel with the pads, wrap and separators you normally use. Take the outside measurements of that arrangement and fit it into a trial carton. A tucked edge in a piece of wrap can use space at one corner. Check that the box can close without the flaps pressing down on the product.

If several items use the same carton, try a typical order and a small one. A simple divider can prevent movement in the smaller pack. Note the space needed for someone to reach the first item after the carton is opened.

Use the plain surface for a clear labeling routine

Put the shipping label where the station can apply it cleanly. Leave the tape seam, flap edge and any hand hole clear. A plain carton gives you room to move the label if the closed face bows or sits under another box.

For stockroom use, check which edge faces out on the shelf. A short code or a removable label can help staff pick the right box without opening it. Test the placement on the smallest size. Make sure the label still reads if boxes sit flush against each other.

Make the blank easy to pick and fold

Keep a folded sample with a note of its inside dimensions. Check where staff grip the flat blank as they take it from a bundle. A mark on the bundle can distinguish sizes that look alike before assembly.

Try the full packing motion with the tape and other materials you already use. Record which flap closes first and what goes into the base before loading. The next person should be able to reproduce the same arrangement without measuring an old carton.

How to choose plain shipping boxes

  1. Measure the product, not an old box

    Send the product's size and add 0.25–0.5 in per side for padding.

  2. Pick the board by weight

    32 ECT up to 65 lb (29 kg) gross, 44 ECT up to 95 lb (43 kg).

  3. Group sizes into one order

    Several sizes in one production run cost less than separate orders.

  4. Consider branded tape

    Plain boxes with printed tape are a low-cost first step towards branded packaging.

Handling marks such as this-way-up or fragile can be printed next to your logo; see shipping box symbols. See what a box will cost to ship with the dimensional weight calculator.

Plain Shipping Boxes pricing, production and delivery

Pricing for plain shipping boxes starts at $0.59 per box for 1 box at 6 × 6 × 6 in (152 × 152 × 152 mm), in 32 ECT single-wall kraft, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of plain shipping boxes takes 5–10 business days once the proof is approved. If the date is tight, rush production takes 5–7 business days on most corrugated mailer and shipping boxes. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for plain shipping boxes.

Options and guides for plain shipping boxes

FAQ

Plain Shipping Boxes FAQ

Can I order plain boxes in any size?

Yes. Every plain box is cut to the inside dimensions you give us.

Why are plain boxes cheaper than printed ones?

There is no printing plate, ink or print setup, and production is simpler.

Can I add printing later?

Yes. The same size can be printed with your logo on a later order.

What is the minimum order?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.

How long does production take?

Usually 5–10 business days, then delivery.
Copied to clipboard!