1, 2 and 3-bottle shippers
Pulp clamshell or tray inserts inside a printed outer, for gifts and small orders.

Shipping & Transit
A custom wine shipping box is a printed corrugated outer carton with an insert that holds each bottle separately, usually molded pulp or corrugated dividers. The insert stops bottles touching and absorbs drops, which is what keeps glass intact in a parcel network.
From $2.40 per box
Price for 1 box at 1 bottle (750 ml), in Molded pulp inserts, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $2.40 | $2.40 |
| 100 | $2.40 | $240.00 |
| 250 | $2.40 | $600.00 |
| 500 | $2.40 | $1,200.00 |
| 1,000 | $2.40 | $2,400.00 |
| 2,500 | $2.40 | $6,000.00 |
| 5,000 | $2.40 | $12,000.00 |
Bottles break when they touch each other or the wall of the box. A good wine shipper keeps every bottle suspended away from the outer walls and from its neighbors, so a drop is absorbed by the insert rather than the glass.
Molded pulp inserts are made from recycled paper, are curbside recyclable and give the best drop protection for their cost. Corrugated dividers are cheaper and lighter, and suit shorter routes or bottles that travel in a case.
Carriers have their own rules for alcohol, and many need an adult signature on delivery. Printing "Contains alcohol, adult signature required" on the outer box, where your carrier requires it, avoids failed deliveries.
Our custom wine shipping boxes are part of the specialist shipping boxes range alongside our custom shipping boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box. Also part of our ecommerce packaging range.
Regular slotted container · FEFCO 0201
The standard construction for custom wine shipping boxes is the regular slotted container (FEFCO 0201). The standard shipping carton: four flaps top and bottom that meet in the middle, closed with tape. It suits shipping, storage and case packs.
Pulp clamshell or tray inserts inside a printed outer, for gifts and small orders.
Case-size outers with pulp trays or corrugated dividers for club shipments.
A printed mailer-style box with a die-cut corrugated insert, for presentation as well as protection.
| Box style | Regular slotted container (FEFCO 0201) |
|---|---|
| Strength grades | 32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg) |
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Flexographic 1–2 spot colors, Full-color digital print, Alcohol and signature warnings, Fragile and this-way-up marks, Water-based ink |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 10–15 business days after artwork approval; rush 5–7 business days |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
Every order is cut to your inside dimensions, so treat these sizes as starting points.
| Inside size (L × W × D) | What fits |
|---|---|
| 1 bottle (750 ml) | Single gifts and samples |
| 2 bottles | Gift pairs and tasting sets |
| 3 bottles | Club shipments and gift sets |
| 6 bottles | Half cases and wine club orders |
| 12 bottles | Full cases |
Set the bottles beside each other and mark the shapes that differ at the neck, shoulder and base. A broad shoulder can touch the next bottle even when the bases are apart. Try a filled sample with the insert in place and look at the clearance above the closures. Keep the capsules and seals on the bottles throughout the trial so the parts that could be marked are represented.
A mixed case can include bottles that share a stated volume but do not sit in the same tray. Place the shortest and longest bottle in the same test pack and check where each rests. If a support touches a label or cap, look for a way to hold the glass at a different point. Check the fit on the side of the box as well as when it stands upright.
Put the bottom support in first and note how staff know which end faces forward. Insert each bottle and see whether the upper tray drops into place without pressure. Add the note, sleeves or bottle cards before closing the carton. A loose card can slip between the inserts and change the fit, so give it a position away from the glass if it needs to travel in the same box.
Open the sample as the recipient will, starting with the seam they can see. Check whether a top tray comes off without bringing a bottle with it. Leave room for fingers at the shoulders or bases so the buyer can lift glass without pulling on the cap. If the pack will carry a single bottle instead of a case, check the release motion in that narrower space too.
Place the actual carrier label on the closed sample and see what is still visible when it is stacked. Keep the tape path and the area reserved for routing marks clear of the main print. We print the text exactly as supplied. Have it reviewed before sending artwork, including any wording that will be added to the carton at dispatch or sent with the order.
If the shipper holds a separate gift box, try fitting the decorated box with the supports you plan to use. Look for contact at the lid edge and any part of the tray that sticks out. Give the recipient a grip on the gift box so they can lift it out without pulling a printed flap. Note which arrangement was sampled so later orders use the same pack.
Send the height and widest diameter. Burgundy, Bordeaux, sparkling and spirit bottles all need different cavities.
Molded pulp protects better on long or multi-stop routes. Corrugated dividers suit cases and short trips.
Confirm your carrier's alcohol rules and print any notice they require.
Order a sample and drop-test it packed with real bottles.
Total an order with the packaging cost calculator, or compare formats on the custom box price list. If products move inside the box, the packaging inserts guide compares card, corrugated, foam and pulp.
Pricing for custom wine shipping boxes starts at $2.40 per box for 1 box at 1 bottle (750 ml), in Molded pulp inserts, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom wine shipping boxes takes 10–15 business days once the proof is approved. If the date is tight, rush production takes 5–7 business days on most corrugated mailer and shipping boxes. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom wine shipping boxes.