Tall folding carton
Suitable for a lighter sealed bottle with a supporting insert.

Rigid and Presentation Packaging
A bottle box is a carton sized to the actual bottle body, shoulders and cap. Internal supports hold the container in place and protect pumps, closures or glass edges.
From $1.19 per box
Price for 1 box at 2 × 2 × 6 in (51 × 51 × 152 mm), in SBS paperboard, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $1.19 | $1.19 |
| 100 | $1.19 | $119.00 |
| 250 | $1.19 | $297.50 |
| 500 | $1.19 | $595.00 |
| 1,000 | $1.19 | $1,190.00 |
| 2,500 | $1.19 | $2,975.00 |
| 5,000 | $1.19 | $5,950.00 |
Single-bottle cartons for oils, drinks and specialty glass bottles with a measured base and closure fit.
A tall bottle with a narrow base can lean into the panel during handling. A collar near the shoulder and a stable base seat can control movement. Multipacks need different dividers or carriers, and should be sampled independently.
Our custom bottle boxes are part of the luxury and gift packaging range alongside our custom rigid boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom bottle boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
Suitable for a lighter sealed bottle with a supporting insert.
Use a cradle for a heavier or high-value container.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Rigid board | Rigid grayboard, 1,200–2,000 gsm, 1/16–3/32 in (1.5–2.5 mm) thick |
| Wrap | Printed wrap paper, 120–157 gsm |
| Paperboard | SBS paperboard, 300–400 gsm (14–24 pt) |
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Full-color exterior, Foil on the front, Die-cut collar, Printed insert |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 12–18 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 2 × 2 × 6 in (51 × 51 × 152 mm), used for A slim capped bottle. The smallest size listed here is 2 × 2 × 6 in (51 × 51 × 152 mm) (A slim capped bottle) and the largest is 4 × 4 × 12 in (102 × 102 × 305 mm) (A taller glass bottle with an internal support). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 2 × 2 × 6 in (51 × 51 × 152 mm) | A slim capped bottle |
| 4 × 4 × 12 in (102 × 102 × 305 mm) | A taller glass bottle with an internal support |
| 1.5 × 1.5 × 4.75 in (38 × 38 × 121 mm) | Compact size: A slim capped bottle, travel or sample size |
| 2.5 × 2.5 × 7.5 in (64 × 64 × 191 mm) | Larger size: A slim capped bottle with an insert or extra room |
Set the filled bottle upright and mark where it changes width. The widest point could be a square shoulder, a collar below the cap or a heavy foot at the base. Measure each point with the label and any neck wrap in place. A diagram with the bottle viewed from two sides helps if the cross section is oval or rectangular. Add an image of the cap from above if its shape is uneven.
Plan what happens if the box is set down on its side. A collar can hold the shoulder while a folded pad supports the bottom, but each part needs a clear place to sit against the bottle. A decorated cap may need a space around it even if there is no room for the bottle to move. Test the support with a filled sample and check the cap and label when you remove it.
If staff load bottles by hand, try lowering the bottle into the carton while it sits open on the work surface. A close collar may be easier to slide over the neck before the carton is closed. If you are using a rigid presentation box, lay it open and see whether the bottle can be lowered into its cradle without tilting the whole box. Allow room to lift it again with the cap pointing up.
Put the lid down slowly with the bottle in place. Watch the closure from the side, where a flap that passes over the cap can be easier to see. If you use a wrap or protective sleeve around the bottle, test with that layer in place. The folded seam can catch at a cut edge as the bottle goes in. Mark the intended bottle direction on the proof for the team that packs the run.
Stand the box and the bottle next to each other on the intended display surface. If the carton has a window, decide whether it should show the bottle shape, the label or just the color. Turn the sample the way staff will load it and check what the window shows. For drinks and oils, use an inner liner unless you have confirmed the board is suitable for direct food contact.
Keep an uninterrupted panel for the text you want visible when several boxes are packed tightly together. Set the order of bottle name, size and variant before choosing a finish. If a small line crosses a fold or a sleeve edge, move it to a clear spot. We print the text exactly as supplied. Have it reviewed before sending artwork, including any wording that repeats across a range of bottles.
Specify the packed weight used to choose the bottom closure.
Include pumps, seals and any collars that change the outside dimensions.
Once your design is approved, custom box subscriptions keep the same boxes arriving on a schedule without re-proofing. Handling marks such as this-way-up or fragile can be printed next to your logo; see shipping box symbols.
Pricing for custom bottle boxes starts at $1.19 per box for 1 box at 2 × 2 × 6 in (51 × 51 × 152 mm), in SBS paperboard, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom bottle boxes takes 12–18 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom bottle boxes.