Automotive Parts Packaging

Custom Automotive Parts Boxes

An automotive parts box is a shipping or retail carton fitted to a component and its contact points. Fitted supports keep projecting metal or plastic edges away from the outer panels.

Custom Automotive Parts Boxes price by quantity

From $1.29 per box

Price for 1 box at 8 × 5 × 4 in (203 × 127 × 102 mm), in Corrugated board, with full-color digital print on the outside.

QuantityPer boxTotal
1$1.29$1.29
100$1.29$129.00
250$1.29$322.50
500$1.29$645.00
1,000$1.29$1,290.00
2,500$1.29$3,225.00
5,000$1.29$6,450.00

What are custom automotive parts boxes?

Printed boxes for accessories, spare parts and components, selected around actual part weight and sharp edges.

A part with concentrated weight can cut through an unsupported corner. Restrain it before selecting heavier board. Protect threads and finished surfaces, and keep SKU and fitting information visible without opening the carton.

Our custom automotive parts boxes are part of the shipping and ecommerce boxes range alongside our custom shipping boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Automotive Parts Boxes styles and specifications

The standard construction for custom automotive parts boxes is the regular slotted container (FEFCO 0201). The standard shipping carton: four flaps top and bottom that meet in the middle, closed with tape. It suits shipping, storage and case packs.

Corrugated case with fitted blocks

Support dense parts and keep hard points away from panels.

Printed retail carton with cradle

Suitable for a lighter accessory whose fitment must be visible.

Custom Automotive Parts Boxes specifications

Box styleRegular slotted container (FEFCO 0201)
Strength grades32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFull-color exterior, Matte or gloss varnish
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval; rush 5–7 business days
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

Corrugated board
Select grade using full weight and distribution conditions.
Folded restraint or separate protective sleeve
Use to isolate protrusions or delicate finishes.

Printing and finishing options

  • Full-color exterior
  • Matte or gloss varnish

Who orders custom automotive parts boxes

  • Aftermarket parts suppliers
  • Automotive teams packing components for retail or delivery

Popular sizes for custom automotive parts boxes

The size buyers ask for most is 8 × 5 × 4 in (203 × 127 × 102 mm), used for small accessory with support around projecting features. The smallest size listed here is 8 × 5 × 4 in (203 × 127 × 102 mm) (small accessory with support around projecting features) and the largest is 16 × 12 × 8 in (406 × 305 × 203 mm) (dense part with independently supported contact points). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
8 × 5 × 4 in (203 × 127 × 102 mm)Small accessory with support around projecting features
16 × 12 × 8 in (406 × 305 × 203 mm)Dense part with independently supported contact points
6.5 × 4 × 3.25 in (165 × 102 × 83 mm)Compact size: small accessory with support around projecting features, travel or sample size
10 × 6.25 × 5 in (254 × 159 × 127 mm)Larger size: small accessory with support around projecting features with an insert or extra room

Find the safe contact points on the part

Set the part on the intended support and mark the surfaces that can carry its weight. Leave room around a thread, flange or polished face. A narrow projection can reach a carton wall even when the part looks centered from above. Test the actual part with its protective caps or wrap on.

Put small fasteners or clips into their final packet before deciding on a compartment. Give the packet its own place so it cannot work beneath a support. Check the carton after moving it in the directions it will take at the bench.

Make the kit easy to check before it closes

Lay out the largest part and its smaller fittings in the order staff pick them. A shallow tray for the fittings can stay visible until the last step. Test whether it can be placed without rubbing a painted surface. If several vehicles use similar kits, mark the correct support or packet position on the sample.

Open the finished box and remove the largest part the way a customer would. Leave enough room for a grip without reaching past a sharp point. If the part is heavy at one end, set the opening where it can remain supported as it is lifted.

Put the part number where the picker can read it

Fit a trial stock label to the closed carton and stand it in the intended bin. The part number should remain visible after another box sits beside it. Keep the barcode away from a corner fold and the tape line.

Keep the packing drawing with the approved carton and its part number. If the same outside dimensions later serve a different component, check the thread clearance and support points again. A change that looks small on paper can affect where the load rests.

How to choose custom automotive parts boxes

  1. Send drawings and packed mass

    Mark sharp edges, threads and surfaces that must not touch.

  2. Check product-specific restrictions

    Confirm how the contents can be carried if they include liquids, batteries or pressurized parts.

  3. Compare versions with all fittings installed

    Put the part with the largest flange or projecting thread into the sample. Measure again with its cap and any loose fitting in place. If a shorter version shares the box, check that it cannot rotate out of the support when the carton is handled.

If products move inside the box, the packaging inserts guide compares card, corrugated, foam and pulp. Once your design is approved, custom box subscriptions keep the same boxes arriving on a schedule without re-proofing.

Custom Automotive Parts Boxes pricing, production and delivery

Pricing for custom automotive parts boxes starts at $1.29 per box for 1 box at 8 × 5 × 4 in (203 × 127 × 102 mm), in Corrugated board, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom automotive parts boxes takes 8–12 business days once the proof is approved. If the date is tight, rush production takes 5–7 business days on most corrugated mailer and shipping boxes. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom automotive parts boxes.

Options and guides for custom automotive parts boxes

FAQ

Custom Automotive Parts Boxes FAQ

Can the same box hold different vehicle variants?

Test dimensions and weight for each part. Use interchangeable supports only if every variant stays restrained.

What is the minimum order for custom automotive parts boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.

What are custom automotive parts boxes made from?

Corrugated board and Folded restraint or separate protective sleeve. Select grade using full weight and distribution conditions. The board is confirmed on your proof before production.

What sizes do custom automotive parts boxes come in?

Every box is cut to your inside dimensions. Popular sizes are 8 × 5 × 4 in (203 × 127 × 102 mm) for small accessory with support around projecting features and 16 × 12 × 8 in (406 × 305 × 203 mm) for dense part with independently supported contact points.

Which construction suits custom automotive parts boxes?

The standard build is the regular slotted container (FEFCO 0201). Corrugated case with fitted blocks: support dense parts and keep hard points away from panels. Printed retail carton with cradle is the main alternative.
Copied to clipboard!