Shipping and Moving Boxes

Custom Plant Shipping Boxes

A plant shipping box is a corrugated carton designed around a pot, root ball and canopy. A pot retainer takes the load while the upper carton leaves clearance for foliage and any planned ventilation.

Custom Plant Shipping Boxes price by quantity

From $1.29 per box

Price for 1 box at 6 × 6 × 12 in (152 × 152 × 305 mm), in Kraft corrugated, with full-color digital print on the outside.

QuantityPer boxTotal
1$1.29$1.29
100$1.29$129.00
250$1.29$322.50
500$1.29$645.00
1,000$1.29$1,290.00
2,500$1.29$3,225.00
5,000$1.29$6,450.00

What are custom plant shipping boxes?

Printed cartons for potted plants and nursery orders, with support at the pot and room around stems and leaves.

Foliage and soil change the pack in different ways. Leaves need space and a suitable transit window, while a heavy pot needs restraint and a moisture plan. Ventilation holes should be placed where they serve a purpose without weakening a loaded panel or admitting spray.

Our custom plant shipping boxes are part of the shipping and ecommerce boxes range alongside our custom shipping boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Plant Shipping Boxes styles and specifications

The standard construction for custom plant shipping boxes is the regular slotted container (FEFCO 0201). The standard shipping carton: four flaps top and bottom that meet in the middle, closed with tape. It suits shipping, storage and case packs.

Pot-retaining base

A collar holds the pot below the foliage so the stem is clear.

Tall shipper with sleeve

A separate support sleeve controls a narrow canopy where the plant can tolerate it.

Custom Plant Shipping Boxes specifications

Box styleRegular slotted container (FEFCO 0201)
Strength grades32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxKeep upright print, One-color branding, Ventilation cutouts where specified
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval; rush 5–7 business days
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

Kraft corrugated
Match wall depth to wet pot weight and the route.
Paperboard or corrugated pot collar
Size the opening around the pot rim or shoulders.

Printing and finishing options

  • Keep upright print
  • One-color branding
  • Ventilation cutouts where specified

Who orders custom plant shipping boxes

  • Plant nurseries shipping permitted live plants
  • Garden shops packing potted orders for delivery

Popular sizes for custom plant shipping boxes

The size buyers ask for most is 6 × 6 × 12 in (152 × 152 × 305 mm), used for small nursery pot with canopy clearance. The smallest size listed here is 6 × 6 × 12 in (152 × 152 × 305 mm) (small nursery pot with canopy clearance) and the largest is 10 × 10 × 20 in (254 × 254 × 508 mm) (taller plant with a supported root ball). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
6 × 6 × 12 in (152 × 152 × 305 mm)Small nursery pot with canopy clearance
10 × 10 × 20 in (254 × 254 × 508 mm)Taller plant with a supported root ball
4.75 × 4.75 × 9.5 in (121 × 121 × 241 mm)Compact size: small nursery pot with canopy clearance, travel or sample size
7.5 × 7.5 × 15 in (191 × 191 × 381 mm)Larger size: small nursery pot with canopy clearance with an insert or extra room

Locate the pot without pressing on the stem

Measure the pot at the base and the rim with any sleeve already fitted. Try the lower support while the pot holds the soil and plant it will ship with. A collar can meet the pot wall below the foliage. Leave room for the stem and check whether the collar moves when the pack is lifted.

Try the same sample with the smallest pot the carton will hold. A gap can let it slide while a larger pot stays firm. Use a different seat if necessary and mark which one belongs with each pot.

Keep the leaves clear through the whole opening

Set the plant inside with the foliage in its natural shape. Watch the tallest leaves as the lid or top flaps pass. An upper support should leave space for the canopy. Try taking the plant out without brushing the leaves against a cut edge or using the stem as a grip.

If the order has a stake, tag or care card, put it where it cannot work under the pot. Leave a place to lift the pot by its sides. Check the fit with the actual wrapping and moisture protection your operation uses.

Make the upright position easy to see

Put the carton in the position where staff will label and stage it. Keep any orientation mark clear of tape, hand holes or a vent. Check that the opening cue can still be seen after the shipping label is applied.

Run a filled trial through the conditions you expect and look at where the pot, soil and leaves sit after unpacking. Keep the pot size, support shape and canopy clearance with the approved sample. Review the fit again when a different plant variety changes that profile.

How to choose custom plant shipping boxes

  1. Weigh the wet pack

    Use the expected weight after watering, including soil and the insert.

  2. Check carrier and plant restrictions

    Confirm the species, destination and transit conditions before choosing vents or dispatch days.

  3. Use the expected pot and soil conditions

    Test a filled carton with the pot in its usual condition at dispatch. Look at the contact area between the pot and base after the expected hold. Check that any separate liner remains in place and does not block a vent or pull against the leaves during removal.

If your launch date is close, rush production shortens the production time on most corrugated formats. Want to feel the board and finishes first? Order a free sample pack before you commit.

Custom Plant Shipping Boxes pricing, production and delivery

Pricing for custom plant shipping boxes starts at $1.29 per box for 1 box at 6 × 6 × 12 in (152 × 152 × 305 mm), in Kraft corrugated, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom plant shipping boxes takes 8–12 business days once the proof is approved. If the date is tight, rush production takes 5–7 business days on most corrugated mailer and shipping boxes. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom plant shipping boxes.

Options and guides for custom plant shipping boxes

FAQ

Custom Plant Shipping Boxes FAQ

Do all plants need vent holes?

No. Compare species and journey conditions. A vent changes moisture and protection as well as airflow.

Can one box fit several pot sizes?

A changeable collar can support different pots. Test the heaviest pot and widest foliage before finalizing the design.

What is the minimum order for custom plant shipping boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.

What are custom plant shipping boxes made from?

Kraft corrugated and Paperboard or corrugated pot collar. Match wall depth to wet pot weight and the route. The board is confirmed on your proof before production.

Which construction suits custom plant shipping boxes?

The standard build is the regular slotted container (FEFCO 0201). Pot-retaining base: A collar holds the pot below the foliage so the stem is clear. Tall shipper with sleeve is the main alternative.
Copied to clipboard!