Single cushion case
Support one watch with an adjustable pad.

Jewelry and Watch Packaging
A watch box is a presentation case with a cushion or shaped support that holds a watch upright and protects the dial, crown and strap.
From $1.49 per box
Price for 1 box at 4 × 4 × 3 in (102 × 102 × 76 mm), in Wrapped grayboard, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $1.49 | $1.49 |
| 100 | $1.49 | $149.00 |
| 250 | $1.49 | $372.50 |
| 500 | $1.49 | $745.00 |
| 1,000 | $1.49 | $1,490.00 |
| 2,500 | $1.49 | $3,725.00 |
| 5,000 | $1.49 | $7,450.00 |
Rigid cases for wristwatches and straps, with a cushion matched to the band and room above the dial.
Leather straps can close around a compressible cushion, while a fixed bracelet may require a smaller support. The crown and pushers add width off center. Check that the case stays clear of them and does not load the crystal when closed.
Our custom watch boxes are part of the luxury and gift packaging range alongside our custom rigid boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Two-piece lid and base · 2PC
The standard construction for custom watch boxes is the two-piece lid and base (2PC). A separate lid slides down over a base; made from rigid grayboard or folding board. It suits gifts, apparel and presentation sets.
Support one watch with an adjustable pad.
Add a separate channel so the strap does not touch the watch.
| Box style | Two-piece lid and base (2PC) |
|---|---|
| Rigid board | Rigid grayboard, 1,200–2,000 gsm, 1/16–3/32 in (1.5–2.5 mm) thick |
| Wrap | Printed wrap paper, 120–157 gsm |
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Printed wrap, Foil logo, Textured paper |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 12–18 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 4 × 4 × 3 in (102 × 102 × 76 mm), used for one wristwatch on a cushion. The smallest size listed here is 4 × 4 × 3 in (102 × 102 × 76 mm) (one wristwatch on a cushion) and the largest is 7 × 5 × 3 in (178 × 127 × 76 mm) (A watch with a spare strap in a separate channel). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 4 × 4 × 3 in (102 × 102 × 76 mm) | One wristwatch on a cushion |
| 7 × 5 × 3 in (178 × 127 × 76 mm) | A watch with a spare strap in a separate channel |
| 3.25 × 3.25 × 2.5 in (83 × 83 × 64 mm) | Compact size: one wristwatch on a cushion, travel or sample size |
| 5 × 5 × 3.75 in (127 × 127 × 95 mm) | Larger size: one wristwatch on a cushion with an insert or extra room |
A watch box is built around three measurements: the case diameter including the crown, the case height from case back to crystal, and the band length and width when wrapped around the cushion. The cushion sets the wrist size the strap closes around, so it needs to be large enough that the buckle or clasp fastens without straining, but small enough that the watch does not slide. Leather and fabric straps forgive a little; metal bracelets do not.
The lid height comes from the case height plus a clearance above the crystal. Too little and the lid presses on the glass; too much and the watch can rise off the cushion. Sending a sample watch, or a dummy of the same size, is the most reliable way to set both measurements.
Most brands start with a single-watch case and add a second format later. A two-watch case suits pairs and his-and-hers sets. A case with a separate channel for a spare strap suits brands that sell interchangeable straps, keeping the strap away from the watch so it cannot scratch the case or crystal. A tool slot for a strap-change pin can be cut into the same insert.
Paperwork such as warranty cards and manuals fits under a lift-out insert or in a slot inside the lid. Keeping them in the box means customers find them later, which helps with warranty claims and resale.
A watch box is often kept for storage, travel or resale, so durability is part of the value. Wrapped grayboard holds its shape for years, and laminated or textured wraps resist scuffs from repeated handling. A hinged or magnetic lid that stays attached is easier to live with than a separate lid that gets lost.
Branding inside the lid is seen every time the watch is put away, so it is a good place for a logo in foil or a printed pattern. On the outside, many watch brands keep the lid minimal and put the logo on the front edge, where it shows when boxes are stacked or displayed.
Test closure and cushion tension on both.
Close the lid with the thickest crystal and cushion.
Decide whether warranty cards, manuals or a spare strap travel in the box, and we will add a slot or a lift-out layer for them.
A hinged or magnetic lid stays with the box, which suits owners who store or travel with the watch in it.
Agencies and resellers can order the same boxes under their own name with white-label packaging. Not sure of the size? The box size finder suggests the smallest box that fits your product.
Pricing for custom watch boxes starts at $1.49 per box for 1 box at 4 × 4 × 3 in (102 × 102 × 76 mm), in Wrapped grayboard, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom watch boxes takes 12–18 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom watch boxes.