Jewelry and Watch Packaging

Custom Necklace Boxes

A necklace box uses an insert with slots or tabs to hold a chain and keep a pendant centered. Spare chain sits behind or under the visible deck.

Custom Necklace Boxes price by quantity

From $1.29 per box

Price for 1 box at 3 × 3 × 1 in (76 × 76 × 25 mm), in Wrapped rigid board, with full-color digital print on the outside.

QuantityPer boxTotal
1$1.29$1.29
100$1.29$129.00
250$1.29$322.50
500$1.29$645.00
1,000$1.29$1,290.00
2,500$1.29$3,225.00
5,000$1.29$6,450.00

What are custom necklace boxes?

Presentation boxes for pendants and chains with measured chain anchors and a clear pendant area.

Letting extra chain rest on the front deck invites tangles and hides the pendant. Anchor the chain near the top, put the excess behind the deck and add a shallow recess when a large pendant can move.

Our custom necklace boxes are part of the luxury and gift packaging range alongside our custom rigid boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Necklace Boxes styles and specifications

The standard construction for custom necklace boxes is the shoulder neck (SN). A three-part rigid box: a base, a raised neck and a lid that rests on the shoulder. It suits fragrance, spirits and luxury goods.

Flat deck with top slots

Anchor a fine chain behind the visible display.

Raised deck with a pendant recess

Support a larger pendant below the chain line.

Custom Necklace Boxes specifications

Box styleShoulder neck (SN)
Rigid boardRigid grayboard, 1,200–2,000 gsm, 1/16–3/32 in (1.5–2.5 mm) thick
WrapPrinted wrap paper, 120–157 gsm
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxPrinted wrap, Foil logo, Textured paper
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time12–18 business days after artwork approval
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

Wrapped rigid board
Use for a long flat lid-and-base case.
Covered card deck
Size slots and folds for the chain and clasp.

Printing and finishing options

  • Printed wrap
  • Foil logo
  • Textured paper

Who orders custom necklace boxes

  • Necklace designers
  • Gift and fashion jewelry teams

Popular sizes for custom necklace boxes

The size buyers ask for most is 3 × 3 × 1 in (76 × 76 × 25 mm), used for A small pendant and thin chain. The smallest size listed here is 3 × 3 × 1 in (76 × 76 × 25 mm) (A small pendant and thin chain) and the largest is 8 × 2.5 × 1.25 in (203 × 64 × 32 mm) (A long necklace with room for the clasp). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
3 × 3 × 1 in (76 × 76 × 25 mm)A small pendant and thin chain
8 × 2.5 × 1.25 in (203 × 64 × 32 mm)A long necklace with room for the clasp
2.5 × 2.5 × 0.75 in (64 × 64 × 19 mm)Compact size: A small pendant and thin chain, travel or sample size
3.75 × 3.75 × 1.25 in (95 × 95 × 32 mm)Larger size: A small pendant and thin chain with an insert or extra room

Lay out the chain before setting the insert width

Place the necklace on the deck at the angle the customer should see. A short chain may fall into a wide curve, while a longer chain can overlap unless the extra length goes behind the card. Set the anchor points so the pendant rests flat. Check the layout with the clasp and any extender fitted.

A pendant can turn when its weight is carried by the chain alone. Fit a shallow recess to the part that needs support and leave the bail free. Try the sample on its side. The pendant should return to the intended position without letting the chain run across its front.

Keep loose chain away from the corners

Turn the insert over and check where the extra chain and clasp lie. Give them enough space so the insert sits level when it goes into the base. A small pocket or tab can keep the clasp from moving under a corner. Fit the longest chain you plan to sell in that box.

Try taking the necklace out while the box rests on a counter. The customer should be able to release one side of the chain without pulling against the pendant. Leave room to lift the card or reach its slots. Compare the same motion with the lightest chain, which can slip into a narrow cut.

Frame the first view when the lid opens

Test the sample with the lid open at the angle a customer will use. The top of the pendant should clear the lid and any card tucked inside it. If the box will stand upright in a display, check the design with the chain hanging naturally. Put any note where it will stay clear of the pendant.

When several necklaces share one box size, identify the chain length on a short face that remains visible in storage. Keep the main mark on a face that does not disappear under a sleeve. Test any applied label so the lid can open and close without the edge of the label lifting.

How to choose custom necklace boxes

  1. Measure the clasp and pendant thickness

    Check where each sits relative to the lid.

  2. Test a vertical carry

    The chain should remain anchored when the box changes orientation.

  3. Give long extenders their own space

    Fit the longest chain with its clasp and extender fastened the way it will ship. Keep extra links behind the deck and check that they cannot move under the pendant recess. Try lifting the card by its intended grip without dragging the chain along a cut edge.

Handling marks such as this-way-up or fragile can be printed next to your logo; see shipping box symbols. See what a box will cost to ship with the dimensional weight calculator.

Custom Necklace Boxes pricing, production and delivery

Pricing for custom necklace boxes starts at $1.29 per box for 1 box at 3 × 3 × 1 in (76 × 76 × 25 mm), in Wrapped rigid board, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom necklace boxes takes 12–18 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom necklace boxes.

FAQ

Custom Necklace Boxes FAQ

Can I use the same box for several chain lengths?

Yes if the longest chain fits behind the deck and the shortest still reaches the display slots.

What is the minimum order for custom necklace boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.

What are custom necklace boxes made from?

Wrapped rigid board and Covered card deck. Use for a long flat lid-and-base case. The board is confirmed on your proof before production.

What sizes do custom necklace boxes come in?

Every box is cut to your inside dimensions. Popular sizes are 3 × 3 × 1 in (76 × 76 × 25 mm) for A small pendant and thin chain and 8 × 2.5 × 1.25 in (203 × 64 × 32 mm) for A long necklace with room for the clasp.

Which construction suits custom necklace boxes?

The standard build is the shoulder neck (SN). Flat deck with top slots: anchor a fine chain behind the visible display. Raised deck with a pendant recess is the main alternative.
Copied to clipboard!