Flat chain deck
Use end slots for the clasp and loose chain.

Jewelry and Watch Packaging
A bracelet box holds a chain bracelet, cuff or bangle on a pad, recessed deck or curved support that matches its natural shape.
From $1.29 per box
Price for 1 box at 7 × 2 × 1 in (178 × 51 × 25 mm), in Wrapped rigid board, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $1.29 | $1.29 |
| 100 | $1.29 | $129.00 |
| 250 | $1.29 | $322.50 |
| 500 | $1.29 | $645.00 |
| 1,000 | $1.29 | $1,290.00 |
| 2,500 | $1.29 | $3,225.00 |
| 5,000 | $1.29 | $6,450.00 |
Branded boxes for soft chains, rigid bangles and cuffs, with support set to the item’s geometry.
A chain bracelet can lie flat and anchor at both ends. A bangle has fixed width and depth, so a shallow chain insert may press against it. Allow room to slide the item off the support.
Our custom bracelet boxes are part of the luxury and gift packaging range alongside our custom rigid boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom bracelet boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
Use end slots for the clasp and loose chain.
Support the circumference without forcing the opening.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Rigid board | Rigid grayboard, 1,200–2,000 gsm, 1/16–3/32 in (1.5–2.5 mm) thick |
| Wrap | Printed wrap paper, 120–157 gsm |
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Printed wrap, Foil logo, Textured paper |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 12–18 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 7 × 2 × 1 in (178 × 51 × 25 mm), used for an extended chain bracelet. The smallest size listed here is 7 × 2 × 1 in (178 × 51 × 25 mm) (an extended chain bracelet) and the largest is 4 × 4 × 2.5 in (102 × 102 × 64 mm) (A rigid bangle on a curved pad). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 7 × 2 × 1 in (178 × 51 × 25 mm) | An extended chain bracelet |
| 4 × 4 × 2.5 in (102 × 102 × 64 mm) | A rigid bangle on a curved pad |
| 5.5 × 1.5 × 0.75 in (140 × 38 × 19 mm) | Compact size: an extended chain bracelet, travel or sample size |
| 8.75 × 2.5 × 1.25 in (222 × 64 × 32 mm) | Larger size: an extended chain bracelet with an insert or extra room |
Set the bracelet on the sample tray with the clasp shut. For a chain, decide whether it should run straight or curve around the center. Put a charm in its natural resting position and check that it stays visible when the lid opens. A stiff cuff needs a clear landing point for both ends, especially if their tips sit at different heights.
Compare how the same insert holds the narrowest chain and the widest band you sell. A shallow groove that suits one can make the other sit too high. If the bracelet is adjustable, fit it in the position you actually intend to ship. The closure should stay clear of any cut edge the buyer will touch.
With a card insert, check where the chain passes through the slots and how the extra length rests behind it. Keep the clasp easy to reach without lifting the entire card. If the bracelet sits on a cushion, see whether it can slide off while the cushion stays in the base.
Put the full sample on its side and set it flat again. Look for a charm or fastening that moved beneath the insert. A small recess can give a raised part room without making the whole box deeper. Leave an open area for the buyer's fingers on the side they reach for first.
A care note can sit under the lid if it stays clear of the bracelet. Try it in the box with any gift tissue folded around the tray. Check whether the paper rises above a charm and touches the lid when closed. Keep the first view clear enough that the buyer sees the bracelet before reading the card.
For a range of similar boxes, put a style name or code on the face staff can read while the cartons sit in a drawer. Place a trial sticker on the folded sample and open it. Keep the sticker clear of the lid edge or drawer pull so the box still opens cleanly.
Include protruding charms and closures.
The item should come off without bending or catching.
Fasten the bracelet at the intended display length and test how it sits on the pad. Then check the other length you expect to sell in the same box. Make room for any extra chain or clasp below the tray so it does not sit over the main face.
Agencies and resellers can order the same boxes under their own name with white-label packaging. Not sure of the size? The box size finder suggests the smallest box that fits your product.
Pricing for custom bracelet boxes starts at $1.29 per box for 1 box at 7 × 2 × 1 in (178 × 51 × 25 mm), in Wrapped rigid board, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom bracelet boxes takes 12–18 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom bracelet boxes.