Pierced stud deck
Seat the post and allow access to its back.

Jewelry and Watch Packaging
An earring box has an insert that secures two earrings through holes, slots or tabs. Clearance below the insert protects posts and backs.
From $1.29 per box
Price for 1 box at 2 × 2 × 1.25 in (51 × 51 × 32 mm), in Wrapped grayboard, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $1.29 | $1.29 |
| 100 | $1.29 | $129.00 |
| 250 | $1.29 | $322.50 |
| 500 | $1.29 | $645.00 |
| 1,000 | $1.29 | $1,290.00 |
| 2,500 | $1.29 | $3,225.00 |
| 5,000 | $1.29 | $6,450.00 |
Small boxes for studs, drops and hoops, with a secure paired display and clearance for the fittings.
Studs need post depth behind the front face, while long drops need space below the anchor. Hoops may need slits rather than holes. Sample the actual pair so the customer can remove each piece without bending posts.
Our custom earring boxes are part of the luxury and gift packaging range alongside our custom rigid boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom earring boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
Seat the post and allow access to its back.
Secure the earring body while keeping its lower part clear.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Rigid board | Rigid grayboard, 1,200–2,000 gsm, 1/16–3/32 in (1.5–2.5 mm) thick |
| Wrap | Printed wrap paper, 120–157 gsm |
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Printed wrap, Foil logo, Textured paper |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 12–18 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 2 × 2 × 1.25 in (51 × 51 × 32 mm), used for studs with clearance behind the deck. The smallest size listed here is 2 × 2 × 1.25 in (51 × 51 × 32 mm) (studs with clearance behind the deck) and the largest is 3.5 × 2.5 × 1.5 in (89 × 64 × 38 mm) (long drop earrings). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 2 × 2 × 1.25 in (51 × 51 × 32 mm) | Studs with clearance behind the deck |
| 3.5 × 2.5 × 1.5 in (89 × 64 × 38 mm) | Long drop earrings |
| 1.5 × 1.5 × 1 in (38 × 38 × 25 mm) | Compact size: studs with clearance behind the deck, travel or sample size |
| 2.5 × 2.5 × 1.5 in (64 × 64 × 38 mm) | Larger size: studs with clearance behind the deck with an insert or extra room |
Fit each earring into the display card with the back attached. A raised stud face can sit flat while a long post projects behind it. Measure both pieces in place. Give the backs enough room so they do not carry the weight of the insert when it is placed into the base.
For drops, set the card upright and watch how the pieces hang. Leave room below the longest part and between the pair. If a hoop uses a slot, try fitting it without opening the hoop farther than usual. Check whether the slot can hold the hoop without rubbing a finished surface.
Try removing the pair while the insert sits in the box. A customer may want to lift the card first to reach the posts. A finger notch or pull tab can make that easy without leaving the card loose. Keep the grip away from any place where a drop could tangle.
Load the largest and smallest pair into their trial inserts. A narrow stud may move if the hole is set for a thicker post. A clip back may need room on both sides of the card. Record the right insert for each style, even if the outer carton is the same.
Place the box open on a counter and see whether a deep lid blocks the view of the top of the pair. If the display is on a slant, check that the pieces stay in position. Try the insert in its actual color and finish, since small metal details can be harder to see against a busy pattern.
Fit any care card and tissue before checking the closed height. Put the card where the customer can lift it without pressing the earrings. If an end label identifies the pair, check that it remains visible when several boxes sit side by side. Keep it clear of the opening seam.
Include the longest fitting under the deck.
Confirm it does not rest against the lid or box wall.
Pull the card out by its intended grip and turn it over. Make sure the backs can be reached without bending the posts. When the card goes back into the case, check that the posts clear the bottom and that no loose tissue covers the first earring.
Handling marks such as this-way-up or fragile can be printed next to your logo; see shipping box symbols. See what a box will cost to ship with the dimensional weight calculator.
Pricing for custom earring boxes starts at $1.29 per box for 1 box at 2 × 2 × 1.25 in (51 × 51 × 32 mm), in Wrapped grayboard, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom earring boxes takes 12–18 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom earring boxes.