Single ring slot
Set angle and depth around the stone and band.

Jewelry and Watch Packaging
A ring box is a small presentation box with a slotted insert that grips a ring band and keeps the setting clear of the lid.
From $1.29 per box
Price for 1 box at 2 × 2 × 1.75 in (51 × 51 × 44 mm), in Wrapped grayboard shell, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $1.29 | $1.29 |
| 100 | $1.29 | $129.00 |
| 250 | $1.29 | $322.50 |
| 500 | $1.29 | $645.00 |
| 1,000 | $1.29 | $1,290.00 |
| 2,500 | $1.29 | $3,225.00 |
| 5,000 | $1.29 | $6,450.00 |
Ring presentation boxes with inserts specified around band width, setting height and the angle of reveal.
Tall stones can press into the lid even when the band fits the slot. Wide bands need different slot tension from thin bands. Test the thickest band for removal and the thinnest one for retention.
Our custom ring boxes are part of the luxury and gift packaging range alongside our custom rigid boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom ring boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
Set angle and depth around the stone and band.
Allow space between rings to avoid contact.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Rigid board | Rigid grayboard, 1,200–2,000 gsm, 1/16–3/32 in (1.5–2.5 mm) thick |
| Wrap | Printed wrap paper, 120–157 gsm |
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Printed wrap, Foil logo, Textured paper |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 12–18 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 2 × 2 × 1.75 in (51 × 51 × 44 mm), used for single low-profile setting. The smallest size listed here is 2 × 2 × 1.75 in (51 × 51 × 44 mm) (single low-profile setting) and the largest is 3 × 2.5 × 2 in (76 × 64 × 51 mm) (pair or higher setting). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 2 × 2 × 1.75 in (51 × 51 × 44 mm) | Single low-profile setting |
| 3 × 2.5 × 2 in (76 × 64 × 51 mm) | Pair or higher setting |
| 1.5 × 1.5 × 1.5 in (38 × 38 × 38 mm) | Compact size: single low-profile setting, travel or sample size |
| 2.5 × 2.5 × 2.25 in (64 × 64 × 57 mm) | Larger size: single low-profile setting with an insert or extra room |
Slide the ring into the trial pad and look at where the band makes contact. A broad band may need a wider slot, while a narrow band can sit too far down in the same opening. Check the actual ring in the angle you want to show. Keep the setting above the pad without using it as a point of support.
Test a second ring if it shares the insert. A curved band and a square band may sit at different heights even when their sizes are close. Try lifting each by its band. If the pad moves with it, adjust the grip of the slot or give the pad a firm seat in the base.
Close the sample slowly and look at the setting from the side. A lid can have enough space once shut and still come close to a tall stone as it swings. Test the full path of the cover with the highest ring in place. Keep the inside liner and any print in the trial.
Put the box on a table and open it as the buyer will. See whether the ring leans forward or sits upright and which angle shows the setting best. A short front wall may improve the view if the pad sits low. Make sure the recipient can reach both sides of the band.
A small case may have little space for a stock label outside the hinge or lid overlap. Test a size label in the position staff will read in a tray. If a printed case serves several settings, keep the label placement consistent. Leave the release point clear of stickers.
Try a care card beside the box or in the outer pack if it cannot fit without touching the ring. Put any inside message where it stays readable when the lid is open. Keep a sample with the approved ring and pad so later orders can be checked if the band or setting changes.
Include the setting in its display angle.
Try both the widest and narrowest bands.
Fit the thickest and thinnest bands you want to use with a common pad. Try pulling each one straight up by the band. Check that the thin ring stays upright and the wide ring can be removed without bringing the pad out of the base.
Handling marks such as this-way-up or fragile can be printed next to your logo; see shipping box symbols. See what a box will cost to ship with the dimensional weight calculator.
Pricing for custom ring boxes starts at $1.29 per box for 1 box at 2 × 2 × 1.75 in (51 × 51 × 44 mm), in Wrapped grayboard shell, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom ring boxes takes 12–18 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom ring boxes.