Two-slot insert
Set a fixed position for each post.

Jewelry and Watch Packaging
A cufflink box uses a small two-position insert to keep a matching pair aligned, with clearance for swivels or fasteners.
From $1.29 per box
Price for 1 box at 2.5 × 2 × 1.3 in (64 × 51 × 33 mm), in Wrapped grayboard, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $1.29 | $1.29 |
| 100 | $1.29 | $129.00 |
| 250 | $1.29 | $322.50 |
| 500 | $1.29 | $645.00 |
| 1,000 | $1.29 | $1,290.00 |
| 2,500 | $1.29 | $3,225.00 |
| 5,000 | $1.29 | $6,450.00 |
Pair presentation boxes with supports for cufflink faces, posts and fasteners.
A hinged bar sits lower or higher depending on its open position. Choose the display orientation, then check the back clearance and avoid contact between the two metal faces.
Our custom cufflink boxes are part of the luxury and gift packaging range alongside our custom rigid boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom cufflink boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
Set a fixed position for each post.
Use where the cufflinks have different profiles or larger faces.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Rigid board | Rigid grayboard, 1,200–2,000 gsm, 1/16–3/32 in (1.5–2.5 mm) thick |
| Wrap | Printed wrap paper, 120–157 gsm |
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Full-color exterior, Matte or gloss varnish |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 12–18 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 2.5 × 2 × 1.3 in (64 × 51 × 33 mm), used for low-profile pair. The smallest size listed here is 2.5 × 2 × 1.3 in (64 × 51 × 33 mm) (low-profile pair) and the largest is 4 × 3 × 1.5 in (102 × 76 × 38 mm) (larger pair or coordinating accessory). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 2.5 × 2 × 1.3 in (64 × 51 × 33 mm) | Low-profile pair |
| 4 × 3 × 1.5 in (102 × 76 × 38 mm) | Larger pair or coordinating accessory |
| 2 × 1.5 × 1 in (51 × 38 × 25 mm) | Compact size: low-profile pair, travel or sample size |
| 3.25 × 2.5 × 1.75 in (83 × 64 × 44 mm) | Larger size: low-profile pair with an insert or extra room |
Place each cufflink in the sample with its face up and the fastening set the way it will ship. A swivel bar may need more room as it turns than it needs at rest. Give the insert enough depth for that movement. Keep the post clear of the base so it does not push the display card up.
Look at the distance between the two faces. A square face can turn into its neighbor even when the round posts are separated. Fit the tray to the actual shape and check that it does not touch a polished corner. Try a full pair and then one link in the same tray.
Open the sample on a table and try taking one link out. An insert can hold it firmly and still leave room to reach the swivel bar below. A removable card gives access from the back if the fastening sits too deep for fingers. Add a clear lift point so the card comes out without pulling on the links.
If the set includes studs or a tie bar, fit those pieces in separate recesses. Check the longest item against the short wall or lid. Put the pieces in the order you want the customer to reach them. Try opening the packed box without holding it at an angle.
A pair may be displayed with the lid open or handed over in a closed gift carton. Put the main design where it makes sense in both positions. A plain end can carry the finish or style code if the boxes stay in a drawer. Try the view with the next box beside it.
Place a sample card in the box if one comes with the set. Check that it does not press on the faces or slide beneath an insert when the box is tipped. If the box goes inside a sleeve, test that the customer can lift the lid without using the sleeve as a grip.
Check clearance below the front face.
Confirm neither item comes loose.
Hold each cufflink against the card and turn the swivel through the full motion a buyer will use. Note where it passes closest to a wall. If the hinge is awkward to reach, make the display card easy to lift before changing the position of the pair.
Close the filled sample and carry it on its side. Reopen it to see whether either face has rotated. If the design needs to stay upright, check where the post or underside can be held without touching a polished edge.
Not sure of the size? The box size finder suggests the smallest box that fits your product. New to custom packaging? See how ordering custom boxes works, from proof to delivery.
Pricing for custom cufflink boxes starts at $1.29 per box for 1 box at 2.5 × 2 × 1.3 in (64 × 51 × 33 mm), in Wrapped grayboard, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom cufflink boxes takes 12–18 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom cufflink boxes.