End-loading carton
Fit a repeatable blister stack.

Health and Wellness Packaging
A contact lens box is an outer carton that holds sealed lens blister packs and carries approved variant and lot identification.
From $0.72 per box
Price for 1 box at 3 × 2 × 1 in (76 × 51 × 25 mm), in White folding board, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $0.72 | $0.72 |
| 100 | $0.72 | $72.00 |
| 250 | $0.72 | $180.00 |
| 500 | $0.72 | $360.00 |
| 1,000 | $0.72 | $720.00 |
| 2,500 | $0.72 | $1,800.00 |
| 5,000 | $0.72 | $3,600.00 |
Printed cartons fitted to sealed contact lens blisters, with room for variable product codes and instructions.
Stack the actual blisters, including raised corners and peel tabs. The carton should close without putting pressure on the seals. Keep prescription or other variant information visible on the intended pick face.
Our custom contact lens boxes are part of the retail and shelf packaging range alongside our custom product boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom contact lens boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
Fit a repeatable blister stack.
Use where two verified variants share a sales pack.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Full-color exterior, Matte or gloss varnish |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 8–12 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 3 × 2 × 1 in (76 × 51 × 25 mm), used for small sealed blister stack. The smallest size listed here is 3 × 2 × 1 in (76 × 51 × 25 mm) (small sealed blister stack) and the largest is 5 × 3 × 1.5 in (127 × 76 × 38 mm) (A larger verified count). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 3 × 2 × 1 in (76 × 51 × 25 mm) | Small sealed blister stack |
| 5 × 3 × 1.5 in (127 × 76 × 38 mm) | A larger verified count |
| 2.5 × 1.5 × 0.75 in (64 × 38 × 19 mm) | Compact size: small sealed blister stack, travel or sample size |
| 3.75 × 2.5 × 1.25 in (95 × 64 × 32 mm) | Larger size: small sealed blister stack with an insert or extra room |
Place the full set of blisters on the bench and line up the peel tabs. Check whether the rims nest or sit on top of each other. The height can change if one blister turns in the stack. Measure the highest corner and the widest tab, then fit the actual stack through the carton opening while keeping the sealed faces clear of the folds.
If several packs go inside one carton, note which way the first one faces and where the customer should take hold. A folded stop can keep the units from sliding while leaving the tabs free. Try the sample after removing the top unit. Check that the next one is easy to reach without pulling the entire stack out or pressing on a blister.
A narrow carton often sits in a drawer with just one short face showing. Test a row of boxes with the end panels facing the aisle or workbench. Put any variable identifiers on the face where staff actually read them. If a sticker covers part of the box, check its position on the folded sample, away from the tab the customer lifts.
If the same outer size serves several variants, use an approved sample to show the print position for each one. Keep the file name and any version mark with the folded carton. We print the text exactly as supplied. Have it reviewed before sending artwork, including the small text and any space left clear for a code applied later.
Try opening a loaded carton from the end intended for the customer. Take out one unit without bending the peel tab, then repeat with the last unit. A pack can be easy to open when full but hard to reach when the remaining blister slides deeper into the box. A shallow support can bring it within reach without changing the outside size.
If the carton includes a leaflet, fit it beside or above the stack in a position that can be reached first. Make sure it does not press on a peel tab when the carton closes. Test a full and partial pack with the leaflet in the same place. Record the direction of the stack so staff can reproduce the arrangement on future runs.
Include tabs, rims and variation between blisters.
Verify that variable codes are accessible and legible.
Not sure of the size? The box size finder suggests the smallest box that fits your product. New to custom packaging? See how ordering custom boxes works, from proof to delivery.
Pricing for custom contact lens boxes starts at $0.72 per box for 1 box at 3 × 2 × 1 in (76 × 51 × 25 mm), in White folding board, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom contact lens boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom contact lens boxes.