Folded insert with positions
Set channels around the actual sealed components.

Health and Wellness Packaging
A test kit box is a printed outer pack that groups individually sealed components in the order they are used. An insert or divider protects parts and keeps instructions accessible.
From $0.79 per box
Price for 1 box at 6 × 4 × 1.5 in (152 × 102 × 38 mm), in White SBS for shelf cartons, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $0.79 | $0.79 |
| 100 | $0.79 | $79.00 |
| 250 | $0.79 | $197.50 |
| 500 | $0.79 | $395.00 |
| 1,000 | $0.79 | $790.00 |
| 2,500 | $0.79 | $1,975.00 |
| 5,000 | $0.79 | $3,950.00 |
Outer cartons for sealed diagnostic or sampling components, with measured compartments and defined areas for approved copy.
A test kit may hold vials, swabs and sealed pouches of different weights. Keep rigid pieces clear of flexible seals. The outer carton is separate from sterile barriers, primary closures and transport classifications.
Our custom test kit boxes are part of the retail and shelf packaging range alongside our custom product boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom test kit boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
Set channels around the actual sealed components.
Use where a kit needs a larger outer and ordered reveal.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Paperboard | SBS paperboard, 300–400 gsm (14–24 pt) |
| Strength grades | 32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg) |
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Full-color exterior, Matte or gloss varnish |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 8–12 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 6 × 4 × 1.5 in (152 × 102 × 38 mm), used for compact sealed sampling components. The smallest size listed here is 6 × 4 × 1.5 in (152 × 102 × 38 mm) (compact sealed sampling components) and the largest is 9 × 6 × 3 in (229 × 152 × 76 mm) (A divided kit with sealed vials). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 6 × 4 × 1.5 in (152 × 102 × 38 mm) | Compact sealed sampling components |
| 9 × 6 × 3 in (229 × 152 × 76 mm) | A divided kit with sealed vials |
| 4.75 × 3.25 × 1.25 in (121 × 83 × 32 mm) | Compact size: compact sealed sampling components, travel or sample size |
| 7.5 × 5 × 2 in (191 × 127 × 51 mm) | Larger size: compact sealed sampling components with an insert or extra room |
Lay out the sealed swabs, capped vials, packets and any other pieces in the order they will be packed. Mark which ones must not touch. A rigid vial can press into a flexible seal if the insert ends too low. Fit the support around the rigid body and leave a separate space for the sealed pouch. Try lifting each piece without pulling the next one out.
Measure the finished packet at its sealed edges rather than the item inside. A corner can stick out farther than it appears in a drawing. Test the fit in the intended position and check it after closing and turning the sample. Put the leaflet or card in place before deciding the final lid clearance.
If the kit opens with instructions, give the leaflet a clear grip along a pocket or tray edge. Place it so someone can read it before moving any components. If it sits above the tray, check that it does not cover the place used to lift the first item. Open a sample on the kind of table or bench where the kit will be used.
For kits with different component counts, check the smaller version in the same layout. An empty cavity can let a loose part move under the edge of the tray. Use a dedicated insert if the arrangement changes enough to affect fit or access. Keep the carton and any separate protective primary packaging specified independently.
Keep the artwork file with a reference for the components it matches. If the same carton has more than one version, identify each one on an end that stays visible while the boxes are picked. We print the text exactly as supplied. Have it reviewed before sending artwork, including instructions supplied as a separate insert.
Trial any code or label with the carton filled and closed. Leave clear space away from the glued edge and the flap that will be lifted. Check which face remains visible when the finished kits are stacked. Give the packing team a folded example so the print orientation and order of the parts are easy to verify.
Confirm required wording and available space with the product owner.
Check shipment requirements for the specific contents before choosing a parcel pack.
Agencies and resellers can order the same boxes under their own name with white-label packaging. Not sure of the size? The box size finder suggests the smallest box that fits your product.
Pricing for custom test kit boxes starts at $0.79 per box for 1 box at 6 × 4 × 1.5 in (152 × 102 × 38 mm), in White SBS for shelf cartons, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom test kit boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom test kit boxes.