Shipping and Moving Boxes

Custom Double-Wall Corrugated Boxes

A double-wall box is a corrugated carton made from two fluted layers bonded between three flat liners. The two layers improve stiffness and give a pack more material to absorb compression or impact.

Custom Double-Wall Corrugated Boxes price by quantity

From $1.39 per box

Price for 1 box at 16 × 12 × 10 in (406 × 305 × 254 mm), in Kraft liners with two flutes, with full-color digital print on the outside.

QuantityPer boxTotal
1$1.39$1.39
100$1.39$139.00
250$1.39$347.50
500$1.39$695.00
1,000$1.39$1,390.00
2,500$1.39$3,475.00
5,000$1.39$6,950.00

What are custom double-wall corrugated boxes?

Two-flute shipping cartons for stacked, fragile or heavy loads that need a specified board construction.

Double-wall describes the construction. It does not give a safe load rating by itself. Liner weights, flute combination, dimensions, humidity and stacking pattern all affect the strength of the assembled box. Compare a stronger single-wall sample with a double-wall sample using the same load.

Our custom double-wall corrugated boxes are part of the shipping and ecommerce boxes range alongside our custom shipping boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Double-Wall Corrugated Boxes styles and specifications

The standard construction for custom double-wall corrugated boxes is the regular slotted container (FEFCO 0201). The standard shipping carton: four flaps top and bottom that meet in the middle, closed with tape. It suits shipping, storage and case packs.

BC double-wall

A thicker combination for larger cases and taller stacks.

EB double-wall

A shallower combination for smaller cartons where print quality and wall depth both matter.

Custom Double-Wall Corrugated Boxes specifications

Box styleRegular slotted container (FEFCO 0201)
Strength grades32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFlexographic spot print, Handling marks, High-contrast destination panel
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval; rush 5–7 business days
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

Kraft liners with two flutes
Specify the tested board grade and combined flute profile.
White outer liner
Choose when product codes or color graphics need higher contrast.

Printing and finishing options

  • Flexographic spot print
  • Handling marks
  • High-contrast destination panel

Who orders custom double-wall corrugated boxes

  • Warehouse teams stacking cartons
  • Manufacturers sending fragile or dense parts

Popular sizes for custom double-wall corrugated boxes

The size buyers ask for most is 16 × 12 × 10 in (406 × 305 × 254 mm), used for dense boxed units with a partition. The smallest size listed here is 16 × 12 × 10 in (406 × 305 × 254 mm) (dense boxed units with a partition) and the largest is 24 × 18 × 16 in (610 × 457 × 406 mm) (larger components with a fitted restraint). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
16 × 12 × 10 in (406 × 305 × 254 mm)Dense boxed units with a partition
24 × 18 × 16 in (610 × 457 × 406 mm)Larger components with a fitted restraint
12.75 × 9.5 × 8 in (324 × 241 × 203 mm)Compact size: dense boxed units with a partition, travel or sample size
20 × 15 × 12.5 in (508 × 381 × 318 mm)Larger size: dense boxed units with a partition with an insert or extra room

Account for the thicker folds in the sample

Fold the selected board around the actual pack and check the corners after the walls are upright. Thick material takes up space at the scores and at overlapping flaps. A drawing can show the intended inside size while the assembled opening feels narrower. Measure the usable space with the intended pads and dividers already fitted.

Try closing the loaded sample with the chosen tape or other closure. See whether the flaps meet without forcing them down. Check the fit at the bottom too, since a layered pad can make the pack sit higher than it did on an empty trial.

Fit the supports before choosing the outer dimensions

A long part can use a broad box and still put most of its weight near one end. Use supports that carry it at firm points and keep hard corners away from the liner. Check whether each support sits flat on the base. If you use partitions, look for a gap that could let a small item travel beneath them.

Trial the carton in the orientation used in storage or on a pallet. Set a second sample beside it and see where the walls touch. A bulge can affect the space needed for adjacent cases. Share the packed layout and storage conditions before settling on the board.

Make receiving and unpacking part of the trial

Put a label on the face the receiver will see first. Keep the opening instructions away from the tape path and any hand hole. If the carton is opened on a low bench, check whether a top pad can be lifted while the main part stays supported.

Record the carton, supports, closure and loaded orientation together. A stronger board may solve one problem while a change to the pack layout solves another. Use the same contents and handling sequence when comparing samples so you can tell which change helped.

How to choose custom double-wall corrugated boxes

  1. Submit packed weight

    Include dividers, cushioning and any hardware in the number.

  2. Measure external dimensions for freight

    A thicker wall changes the outside size even when the internal dimensions stay the same.

  3. Measure the pallet footprint with the carton closed

    Set a packed sample in the planned row and measure the width where the folds or pads add space. Check that adjacent cartons sit in their intended positions without pushing the sides in. Record the finished size with the board and supports.

See what a box will cost to ship with the dimensional weight calculator. Unfamiliar terms on a quote? The packaging glossary explains them in plain English.

Custom Double-Wall Corrugated Boxes pricing, production and delivery

Pricing for custom double-wall corrugated boxes starts at $1.39 per box for 1 box at 16 × 12 × 10 in (406 × 305 × 254 mm), in Kraft liners with two flutes, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom double-wall corrugated boxes takes 8–12 business days once the proof is approved. If the date is tight, rush production takes 5–7 business days on most corrugated mailer and shipping boxes. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom double-wall corrugated boxes.

Options and guides for custom double-wall corrugated boxes

FAQ

Custom Double-Wall Corrugated Boxes FAQ

Is double-wall the same as double-layered cardboard?

Ask for two fluted layers and three liners. A folded double panel in single-wall board is a different construction.

How do I compare two quoted boards?

Compare board construction and the tested strength values under similar conditioning, then confirm performance with a packed sample.

What is the minimum order for custom double-wall corrugated boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.

What sizes do custom double-wall corrugated boxes come in?

Every box is cut to your inside dimensions. Popular sizes are 16 × 12 × 10 in (406 × 305 × 254 mm) for dense boxed units with a partition and 24 × 18 × 16 in (610 × 457 × 406 mm) for larger components with a fitted restraint.

Which construction suits custom double-wall corrugated boxes?

The standard build is the regular slotted container (FEFCO 0201). BC double-wall: A thicker combination for larger cases and taller stacks. EB double-wall is the main alternative.
Copied to clipboard!