Tall base and stem carton
Restrain the base and support the stem only at approved points.

Shipping and Moving Boxes
A lamp box is a corrugated pack fitted to the lamp base, stem or shade, with supports that stop the parts loading fragile surfaces.
From $1.29 per box
Price for 1 box at 10 × 10 × 18 in (254 × 254 × 457 mm), in Corrugated outer board, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $1.29 | $1.29 |
| 100 | $1.29 | $129.00 |
| 250 | $1.29 | $322.50 |
| 500 | $1.29 | $645.00 |
| 1,000 | $1.29 | $1,290.00 |
| 2,500 | $1.29 | $3,225.00 |
| 5,000 | $1.29 | $6,450.00 |
Moving and shipping cartons for lamps and shades, with a supported base and room around delicate parts.
A heavy base can move into a light shade or stem. Pack the shade separately where it cannot safely share the cavity. Secure cables so they cannot scrape the finish or pull on the fixture.
Our custom lamp boxes are part of the shipping and ecommerce boxes range alongside our custom shipping boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom lamp boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
Restrain the base and support the stem only at approved points.
Support the rim without crushing fabric or material.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Strength grades | 32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg) |
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | One-color print, Handling marks |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 8–12 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 10 × 10 × 18 in (254 × 254 × 457 mm), used for small table lamp with a restrained base. The smallest size listed here is 10 × 10 × 18 in (254 × 254 × 457 mm) (small table lamp with a restrained base) and the largest is 16 × 16 × 14 in (406 × 406 × 356 mm) (larger shade packed separately). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 10 × 10 × 18 in (254 × 254 × 457 mm) | Small table lamp with a restrained base |
| 16 × 16 × 14 in (406 × 406 × 356 mm) | Larger shade packed separately |
| 8 × 8 × 14.5 in (203 × 203 × 368 mm) | Compact size: small table lamp with a restrained base, travel or sample size |
| 12.5 × 12.5 × 22.5 in (318 × 318 × 572 mm) | Larger size: small table lamp with a restrained base with an insert or extra room |
Put the lamp base into the intended lower support and look at its feet, finish and cable exit. A broad base can sit unevenly if the cord passes beneath it. Give the cord a clear path and a separate spot for the plug. Check the base with any protective wrap already in place.
If the stem separates, measure it with both end fittings attached. Rest it where its surface can stay clear of a box wall. Try fitting the parts in the order staff will use so a long stem does not block access to a support.
Measure the shade across its widest rim and note any mount that sticks out. A shallow divider may separate the pieces while the box is upright and leave enough room for them to meet when it turns. Try the packed orientation and check where the shade could move.
Decide whether the shade should come out first. Give the buyer a place to grasp it without pulling on a delicate rim. If it needs its own carton, try that box beside the base pack to see how both will be labeled and handled.
Set the sample on a surface the buyer can use and open it from the marked end. See whether the first support can lift out without tugging the shade or cable. Place any instructions where they can be read before the lamp comes out.
Apply the model and handling labels to the sample. Keep them clear of the tape and the grip used to lift it. Save a packing photo that shows which way the base, shade and fittings face so a later order can repeat that arrangement.
Include plugs, shade hardware and the widest base.
Tilt the complete sample and inspect points of contact.
Set a wrapped base into the trial insert and load the rest of the lamp as intended. After the carton has been carried, lift the base by its firm surfaces and check the finish at the support points. If the wrap shifted or folded, try moving the seam to a place that does not bear weight.
Put any finial, stem hardware and shade mount beside the parts they fit. Try packing them in a small bag or pocket where the user can find them on opening. Include the fitted bulb or separate bulb carton if it travels with the lamp. Confirm nothing projects into the space reserved for the shade.
If products move inside the box, the packaging inserts guide compares card, corrugated, foam and pulp. Once your design is approved, custom box subscriptions keep the same boxes arriving on a schedule without re-proofing.
Pricing for custom lamp boxes starts at $1.29 per box for 1 box at 10 × 10 × 18 in (254 × 254 × 457 mm), in Corrugated outer board, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom lamp boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom lamp boxes.