Full-overlap case
Increase flap coverage for appropriate equipment sizes.

Shipping and Moving Boxes
An appliance box is a large corrugated case sized to a finished unit and its protective supports. It accounts for handling weight, stacking and protruding doors, plugs or controls.
From $2.79 per box
Price for 1 box at 20 × 18 × 18 in (508 × 457 × 457 mm), in Double-wall corrugated, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $2.79 | $2.79 |
| 100 | $2.79 | $279.00 |
| 250 | $2.79 | $697.50 |
| 500 | $2.79 | $1,395.00 |
| 1,000 | $2.79 | $2,790.00 |
| 2,500 | $2.79 | $6,975.00 |
| 5,000 | $2.79 | $13,950.00 |
Made-to-size cartons for appliances and bulky equipment, planned around pads, lift methods and packed outside size.
A long unsupported face can bow toward a door or control panel. Use supports at approved contact points. Large appliances may need pallet restraint or another handling system designed for the load.
Our custom appliance boxes are part of the shipping and ecommerce boxes range alongside our custom shipping boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom appliance boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
Increase flap coverage for appropriate equipment sizes.
Use where the appliance is packed around a supported base.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Strength grades | 32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg) |
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | One-color print, Handling marks |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 8–12 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
The size buyers ask for most is 20 × 18 × 18 in (508 × 457 × 457 mm), used for small countertop appliance. The smallest size listed here is 20 × 18 × 18 in (508 × 457 × 457 mm) (small countertop appliance) and the largest is 32 × 30 × 42 in (813 × 762 × 1067 mm) (larger unit with base support after measuring). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.
| Inside size (L × W × D) | What fits |
|---|---|
| 20 × 18 × 18 in (508 × 457 × 457 mm) | Small countertop appliance |
| 32 × 30 × 42 in (813 × 762 × 1067 mm) | Larger unit with base support after measuring |
| 16 × 14.5 × 14.5 in (406 × 368 × 368 mm) | Compact size: small countertop appliance, travel or sample size |
| 25 × 22.5 × 22.5 in (635 × 572 × 572 mm) | Larger size: small countertop appliance with an insert or extra room |
Set the appliance in its packing position and mark where the base and side supports can touch. Keep a recessed door, control knob or handle free of pressure. Measure with the protective cover and any mounting hardware already fitted. Compare the front and rear profiles so a deeper part does not land against the wall.
Fit the lower supports before adding the upper ones. Check that the appliance sits level and that the upper pieces do not press on any movable parts. Note where the packing team needs room to reach during assembly.
Pack any cord, bracket or manual in its intended position. A long part can slide into the gap around a door if it has no stop. Put it in a supported pocket clear of the appliance finish. Check the filled sample with the outer flaps closed.
Try the same setup for another model if it will share the carton. Look at the feet and rear panel as well as the overall height. A model with the same front size may have a different cord position or depth. Keep the supports identified by model.
Mark which face is visible when staff stage the packed carton. Leave room for any label away from the opening and the points used to move it. Try removing the top supports while the appliance remains stable.
Check the packed outside size with any pallet or restraint that will be used. Keep a note of the orientation, support locations and opening order with the sample. If those conditions change, repeat the fit check with the team handling the load.
Include any pallet and the actual handling plan.
Include handles, hinges and cord storage.
Mark any tight corner, narrow door or low shelf that the loaded carton has to clear. Record the outside dimensions after adding every support, flap and restraint. Check the upright position before fixing those dimensions, because the equipment may need to stay on its base throughout the route. Share any limit on the finished carton with the people preparing the sample.
Lay out the end blocks, sleeve and outer case at the actual station. Ask staff to assemble the sample using the equipment they normally have on hand. Mark any step that requires access from two sides. At receiving, check whether the first block can be removed with the carton still on its base.
Set the shallower model beside the deeper one and compare their contact points at the base and sides. Put a clear mark on any support that belongs to just one model. Fit the final pad with the cord or bracket installed, then confirm that the support cannot drift into the gap next to a door or control panel.
Not sure of the size? The box size finder suggests the smallest box that fits your product. New to custom packaging? See how ordering custom boxes works, from proof to delivery.
Pricing for custom appliance boxes starts at $2.79 per box for 1 box at 20 × 18 × 18 in (508 × 457 × 457 mm), in Double-wall corrugated, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom appliance boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom appliance boxes.