Paperboard carton with a collar below the bulb
Support the bulb at its base or specified contact point and keep pressure off the diffuser.

Electronics Packaging
A light bulb box is made to fit a compact LED bulb. One construction option is a paperboard carton with a collar below the bulb.
From $0.79 per box
Price for 1 box at 2.6 × 2.6 × 5 in (66 × 66 × 127 mm), in Printed folding paperboard, with full-color digital print on the outside.
| Quantity | Per box | Total |
|---|---|---|
| 1 | $0.79 | $0.79 |
| 100 | $0.79 | $79.00 |
| 250 | $0.79 | $197.50 |
| 500 | $0.79 | $395.00 |
| 1,000 | $0.79 | $790.00 |
| 2,500 | $0.79 | $1,975.00 |
| 5,000 | $0.79 | $3,950.00 |
Custom printed boxes sized for a compact LED bulb.
Support the bulb at its base or specified contact point and keep pressure off the diffuser.
LED bulbs are light but fragile at the glass or plastic dome, and the base holds the electronics. The carton supports the bulb at its base or neck with a collar so the dome never touches the walls. Bulb buyers check wattage, brightness, color temperature and base type, so these are printed large on the front and repeated on an end panel for shelf stacking. Many lighting brands use the same carton for several color temperatures and print a strip to tell warm white from daylight.
Our custom light bulb boxes are part of the retail and shelf packaging range alongside our custom product boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.
Reverse tuck end · RTE
The standard construction for custom light bulb boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.
Support the bulb at its base or specified contact point and keep pressure off the diffuser.
| Box style | Reverse tuck end (RTE) |
|---|---|
| Print methods | Digital CMYK, Offset litho, Flexographic spot color |
| Finishes for this box | Full-color exterior print, Matte or gloss finish where compatible with the board and folds |
| Minimum order | 1 box per size and artwork |
| Digital proof | Within 24 hours of receiving artwork |
| Production time | 8–12 business days after artwork approval |
| Shipping | Free standard shipping across the US, 3–6 business days, tracked |
| Returns | Free returns within 21 days of delivery |
Every order is cut to your inside dimensions, so treat these sizes as starting points.
| Inside size (L × W × D) | What fits |
|---|---|
| 2.6 × 2.6 × 5 in (66 × 66 × 127 mm) | Starting point for a compact LED bulb. Confirm fit with a packed sample. |
| 2 × 2 × 4 in (51 × 51 × 102 mm) | Compact size: a compact LED bulb, travel or sample size |
| 3.25 × 3.25 × 6.25 in (83 × 83 × 159 mm) | Larger size: a compact LED bulb with an insert or extra room |
| 2.5 × 2.5 × 10 in (64 × 64 × 254 mm) | Double depth: a compact LED bulb, two layers deep |
Set the actual bulb into a sample and check where its base or neck meets the support. Leave the diffuser free of pressure, including at the corners if the bulb is wider near the top. Fit any protective cap or sleeve before measuring. Watch where the widest part passes the flap during loading.
Compare two shapes separately if they share the same outside carton. A longer bulb can clear the base and still approach the lid at an angle. Mark where each one rests so staff can choose the right support.
Open the sample from the end the customer will use. Check whether a finger can reach the base without pushing on the diffuser. A low notch in a tray can make the grip easier without letting the whole bulb slide out. Test the last bulb in a partly empty multipack.
For a set, use the actual count and leave space between bulb tops. Check the pack after setting it on its side and lifting it again. A support that is level on a bench can shift if it is not held at the bottom.
Stand the carton in the fixture or stack used in the shop. Give the model and variant enough space to read on the face that stays visible. If a sticker supplies that information, test it with the tuck fully closed.
Check a folded proof beside the actual bulb. We print the text exactly as supplied. Have it reviewed before sending artwork, including any small copy that changes by model. Keep the approved fit with the product code so a later shape change can be checked.
Support the bulb at its base or specified contact point and keep pressure off the diffuser.
Turn a packed sample upside down and shake gently to check the bulb cannot move onto the flap.
Check that the lamp cannot rattle or press on a tuck flap when the box is tipped.
Want to feel the board and finishes first? Order a free sample pack before you commit. Still deciding? The custom box FAQ answers the questions buyers ask most before ordering.
Pricing for custom light bulb boxes starts at $0.79 per box for 1 box at 2.6 × 2.6 × 5 in (66 × 66 × 127 mm), in Printed folding paperboard, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.
After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom light bulb boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.
For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom light bulb boxes.