Electronics Packaging

Custom Mobile Battery Boxes

A mobile battery box is a printed outer carton sized to an approved primary battery pack or protected module. A support can keep the primary pack from moving.

Custom Mobile Battery Boxes price by quantity

From $0.69 per box

Price for 1 box at 4 × 3 × 0.75 in (102 × 76 × 19 mm), in Folding board, with full-color digital print on the outside.

QuantityPer boxTotal
1$0.69$0.69
100$0.69$69.00
250$0.69$172.50
500$0.69$345.00
1,000$0.69$690.00
2,500$0.69$1,725.00
5,000$0.69$3,450.00

What are custom mobile battery boxes?

Empty outer cartons for phone battery replacement packs with clearance for the protected module and visible identification.

Measure the battery in the specified protective primary pack, including any tab or connector. Transport rules apply to the battery and shipment configuration and are separate from the fit of a printed carton.

Our custom mobile battery boxes are part of the retail and shelf packaging range alongside our custom product boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Mobile Battery Boxes styles and specifications

The standard construction for custom mobile battery boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.

Slim sealed-product carton

Fit the dimensions of the already protected module.

Replacement kit divider

Separate tools or accessories from the protected module.

Custom Mobile Battery Boxes specifications

Box styleReverse tuck end (RTE)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFull-color exterior, Matte or gloss varnish
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

Folding board
A smooth surface for model information.
Folded card stops
Keep the primary pack within the intended position.

Printing and finishing options

  • Full-color exterior
  • Matte or gloss varnish

Who orders custom mobile battery boxes

  • Electronics parts suppliers
  • Repair kit brands sourcing empty cartons

Popular sizes for custom mobile battery boxes

The size buyers ask for most is 4 × 3 × 0.75 in (102 × 76 × 19 mm), used for small protected module. The smallest size listed here is 4 × 3 × 0.75 in (102 × 76 × 19 mm) (small protected module) and the largest is 6 × 4 × 1.5 in (152 × 102 × 38 mm) (protected module and accessories). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
4 × 3 × 0.75 in (102 × 76 × 19 mm)Small protected module
6 × 4 × 1.5 in (152 × 102 × 38 mm)Protected module and accessories
3.25 × 2.5 × 0.5 in (83 × 64 × 13 mm)Compact size: small protected module, travel or sample size
5 × 3.75 × 1 in (127 × 95 × 25 mm)Larger size: small protected module with an insert or extra room

Measure the complete protected module

Use the battery in the protective packaging supplied for it and include every fold, tab and corner of that pack. A sealed edge can project beyond the main body. Try feeding it into the carton without pressing on the ends or changing the primary pack. Check the fit with the box closed and laid flat.

If several modules use the same outer size, compare the short and long versions with the protective packaging in place. A folded stop can locate the shorter version if it leaves the sealed edge free. Record which insert fits each module.

Keep the opening clear of the protected connector area

Try the opening with a finished primary pack or an approved sizing sample. It should come out by its body or wrap without the carton catching on a tab. Keep the protected connector area clear of any fold that could press against it while the pack is loaded or removed.

If a leaflet sits beside the module, fit it with the fold turned away from the opening. A thick fold can push the inner package against a cut edge. Test the sample after closing it and turning it to the side it will take during storage.

Make version checks simple at the workbench

Give the outer carton a clear place for the model code or stock label. Try reading it while blanks are folded and stacked. A name on the end can help match a finished carton with a protected module without opening either part. Use the real label width to check that it stays clear of the flap.

Put the approved artwork and sample beside the module used for the fit check. We print the text exactly as supplied. Have it reviewed before sending artwork. Keep the outer carton fit and any separate instructions for preparing the shipment recorded with the correct product version.

How to choose custom mobile battery boxes

  1. Confirm the approved primary pack

    Review terminal protection and shipment requirements separately.

  2. Check the intended retail fit

    Measure the module with all protective components in place.

  3. Use a sizing sample that includes the thickest parts of the approved pack

    Match the position of the protected connector and the thickest seal. Check that the module clears the inner folds while being loaded. Mark which face should remain visible to the packer. Include the finished label if it adds an edge that could catch during removal.

  4. Check that stock can be identified while the primary pack stays closed

    Put the sample on a shelf and see which end the picker reads. Place the model or version on a clear area of the folded carton. Make sure a sticker does not bridge the opening or obscure information already printed there.

If products move inside the box, the packaging inserts guide compares card, corrugated, foam and pulp. Once your design is approved, custom box subscriptions keep the same boxes arriving on a schedule without re-proofing.

Custom Mobile Battery Boxes pricing, production and delivery

Pricing for custom mobile battery boxes starts at $0.69 per box for 1 box at 4 × 3 × 0.75 in (102 × 76 × 19 mm), in Folding board, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom mobile battery boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom mobile battery boxes.

Options and guides for custom mobile battery boxes

FAQ

Custom Mobile Battery Boxes FAQ

Is this an approved dangerous goods shipper?

This listing describes an empty retail outer carton. Verify and specify transport packaging for the actual battery separately.

What is the minimum order for custom mobile battery boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.

What are custom mobile battery boxes made from?

Folding board and Folded card stops. A smooth surface for model information. The board is confirmed on your proof before production.

What sizes do custom mobile battery boxes come in?

Every box is cut to your inside dimensions. Popular sizes are 4 × 3 × 0.75 in (102 × 76 × 19 mm) for small protected module and 6 × 4 × 1.5 in (152 × 102 × 38 mm) for protected module and accessories.

Which construction suits custom mobile battery boxes?

The standard build is the reverse tuck end (RTE). Slim sealed-product carton: fit the dimensions of the already protected module. Replacement kit divider is the main alternative.
Copied to clipboard!