Electronics Packaging

Custom Headphone Boxes

A headphone box is a retail or presentation pack with a cradle sized to the headband, ear cups and any accessories. It holds the headphones at their approved storage angle.

Custom Headphone Boxes price by quantity

From $1.19 per box

Price for 1 box at 8 × 7 × 3.5 in (203 × 178 × 89 mm), in Corrugated outer and fitted cradle, with full-color digital print on the outside.

QuantityPer boxTotal
1$1.19$1.19
100$1.19$119.00
250$1.19$297.50
500$1.19$595.00
1,000$1.19$1,190.00
2,500$1.19$2,975.00
5,000$1.19$5,950.00

What are custom headphone boxes?

Printed packs for over-ear and on-ear headphones, with clearances around ear cushions, hinges and controls.

A folding headset can travel with cups rotated or extended. Use the manufacturer’s storage position and measure the broadest points in that state. A cable compartment prevents loose connectors from contacting the ear cups.

Our custom headphone boxes are part of the retail and shelf packaging range alongside our custom product boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Headphone Boxes styles and specifications

Tray · TRAY

The standard construction for custom headphone boxes is the tray (TRAY). An open tray with folded corner walls, used alone or inside a sleeve. It suits food, retail trays and inner packaging.

Form-fitting tray

Support the band and cups without loading hinges.

Separate accessories channel

Hold the cable, case or adaptor away from the headset.

Custom Headphone Boxes specifications

Box styleTray (TRAY)
Rigid boardRigid grayboard, 1,200–2,000 gsm, 1/16–3/32 in (1.5–2.5 mm) thick
WrapPrinted wrap paper, 120–157 gsm
Strength grades32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFull-color exterior, Matte or gloss varnish
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

Corrugated outer and fitted cradle
Use a stiff wall when the pack must be shipped.
Wrapped rigid board with insert
A presentation case for higher-value sets.

Printing and finishing options

  • Full-color exterior
  • Matte or gloss varnish

Who orders custom headphone boxes

  • Audio brands launching headsets
  • Retailers packaging headphones and accessories together

Popular sizes for custom headphone boxes

The size buyers ask for most is 8 × 7 × 3.5 in (203 × 178 × 89 mm), used for folded over-ear headphones. The smallest size listed here is 8 × 7 × 3.5 in (203 × 178 × 89 mm) (folded over-ear headphones) and the largest is 10 × 8 × 5 in (254 × 203 × 127 mm) (headset, travel case and accessory compartment). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
8 × 7 × 3.5 in (203 × 178 × 89 mm)Folded over-ear headphones
10 × 8 × 5 in (254 × 203 × 127 mm)Headset, travel case and accessory compartment
6.5 × 5.5 × 2.75 in (165 × 140 × 70 mm)Compact size: folded over-ear headphones, travel or sample size
10 × 8.75 × 4.5 in (254 × 222 × 114 mm)Larger size: folded over-ear headphones with an insert or extra room

Fit the headset in its intended storage position

Rotate or fold the cups as the headset maker recommends and put the headphones on the sample tray. Look for the point where the headband meets the tray when the cups sit flat. A shallow insert can hold the outer shell while leaving soft pads free of pressure. Try a sample with the headband extended as far as it will be during packing.

Check the fold against the actual lid. A raised swivel or button can sit near the panel even when the cups themselves clear it. Watch that area as the lid comes down, then inspect the cushions after the closed box has rested.

Give the cable a place away from the cups

Coil the lead at the same size the packing team uses. Keep the plug from landing against a padded surface or sliding through a gap below the tray. A narrow channel can take a short lead, while a deeper well may be needed for a wall adapter.

If the kit includes a case, see whether the customer should lift the case out first or open it while it sits in the carton. Check where spare pads or instructions can go. A card resting across the cups can hide a grip or keep the carton from closing squarely.

Try the release with the headset fully packed

Open the sample on a desk and lift the headset by the supported part of the frame. If the tray comes up too, reduce the grip in that spot or add a finger recess. Check that the lift does not require unfolding the headset inside the carton.

A color variant can use the same outer artwork if there is room for an identifier on the face staff read in a tray. Check that any sticker clears the opening. Put the tray and artwork sample together so the correct folded position can be repeated on future runs.

How to choose custom headphone boxes

  1. Measure the approved folded position

    Account for rotation and protruding buttons.

  2. Check pressure points

    Close a loaded sample and look for marks on pads and controls.

  3. Compare the tray with the headset fully folded and partly extended

    Put the headset in the intended packed position, then check whether it can unfold slightly when the box is tipped. If a cup can rotate into a wall, move the support to a stable point on the shell. Make sure the pads have space to recover their shape after unpacking.

  4. Keep spare pads within reach

    Fit the spare pads in their final wrap. Check the folded edges of the wrap with the lid down. Put the pads in a place the recipient can reach without having to lift the headphones by a hinge or turn the whole tray over.

Still deciding? The custom box FAQ answers the questions buyers ask most before ordering. Total an order with the packaging cost calculator, or compare formats on the custom box price list.

Custom Headphone Boxes pricing, production and delivery

Pricing for custom headphone boxes starts at $1.19 per box for 1 box at 8 × 7 × 3.5 in (203 × 178 × 89 mm), in Corrugated outer and fitted cradle, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom headphone boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom headphone boxes.

FAQ

Custom Headphone Boxes FAQ

Can this box fit earbuds?

Earbuds and charging cases need a much smaller, separately fitted cavity.

What is the minimum order for custom headphone boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.

What are custom headphone boxes made from?

Corrugated outer and fitted cradle and Wrapped rigid board with insert. Use a stiff wall when the pack must be shipped. The board is confirmed on your proof before production.

What sizes do custom headphone boxes come in?

Every box is cut to your inside dimensions. Popular sizes are 8 × 7 × 3.5 in (203 × 178 × 89 mm) for folded over-ear headphones and 10 × 8 × 5 in (254 × 203 × 127 mm) for headset, travel case and accessory compartment.

Which construction suits custom headphone boxes?

The standard build is the tray (TRAY). Form-fitting tray: support the band and cups without loading hinges. Separate accessories channel is the main alternative.
Copied to clipboard!