Electronics Packaging

Custom Drone Boxes

A drone box is a printed pack with fitted supports for an aircraft body, arms and accessories. It holds the drone in the manufacturer’s approved packed position.

Custom Drone Boxes price by quantity

From $1.19 per box

Price for 1 box at 9 × 6 × 4 in (229 × 152 × 102 mm), in Corrugated outer, with full-color digital print on the outside.

QuantityPer boxTotal
1$1.19$1.19
100$1.19$119.00
250$1.19$297.50
500$1.19$595.00
1,000$1.19$1,190.00
2,500$1.19$2,975.00
5,000$1.19$5,950.00

What are custom drone boxes?

Fitted cartons for folded drones or boxed kits, with clearance around propellers, camera mounts and controls.

Support stable body points instead of loading a gimbal, propeller or motor arm. A kit with a remote and charger needs separate pockets, because loose pieces can hit the aircraft during handling.

Our custom drone boxes are part of the retail and shelf packaging range alongside our custom product boxes. Compare all 236 custom box types, or see how Custom Boxes makes printed packaging from one box.

Custom Drone Boxes styles and specifications

The standard construction for custom drone boxes is the reverse tuck end (RTE). Top and bottom tuck flaps close from opposite faces, so the carton prints and glues in one pass. It suits cosmetics, supplements and light retail products.

Folded aircraft cradle

Match the measured outline in transport position.

Compartmented kit box

Keep controllers, cables and spares away from the aircraft.

Custom Drone Boxes specifications

Box styleReverse tuck end (RTE)
Strength grades32 ECT single wall: 200 psi burst, up to 65 lb (29 kg); 44 ECT single wall: 275 psi burst, up to 95 lb (43 kg); 48 ECT double wall: 275 psi burst, up to 100 lb (45 kg)
Print methodsDigital CMYK, Offset litho, Flexographic spot color
Finishes for this boxFull-color exterior, Matte or gloss varnish
Minimum order1 box per size and artwork
Digital proofWithin 24 hours of receiving artwork
Production time8–12 business days after artwork approval
ShippingFree standard shipping across the US, 3–6 business days, tracked
ReturnsFree returns within 21 days of delivery

Materials, print and finishes

Corrugated outer
Select strength for the full kit and shipping route.
Cut and fitted tray
Allow clearance around delicate components.

Printing and finishing options

  • Full-color exterior
  • Matte or gloss varnish

Who orders custom drone boxes

  • Drone and imaging equipment brands
  • Retailers assembling equipment kits

Popular sizes for custom drone boxes

The size buyers ask for most is 9 × 6 × 4 in (229 × 152 × 102 mm), used for compact folded aircraft. The smallest size listed here is 9 × 6 × 4 in (229 × 152 × 102 mm) (compact folded aircraft) and the largest is 14 × 10 × 6 in (356 × 254 × 152 mm) (aircraft, remote and separated accessories). Every box is cut to your own inside dimensions, so treat these as starting points rather than fixed sizes.

Inside size (L × W × D)What fits
9 × 6 × 4 in (229 × 152 × 102 mm)Compact folded aircraft
14 × 10 × 6 in (356 × 254 × 152 mm)Aircraft, remote and separated accessories
7.25 × 4.75 × 3.25 in (184 × 121 × 83 mm)Compact size: compact folded aircraft, travel or sample size
11.25 × 7.5 × 5 in (286 × 191 × 127 mm)Larger size: compact folded aircraft with an insert or extra room

Mark the parts of the body that can rest on the tray

Use the aircraft in the position in which it will be packed. Mark the folded arms, camera mount and any part that projects below the shell. Place the supports beneath stable parts of the body. Test that the tray leaves room for the propellers and for any cover on the camera.

Close a sample slowly with the aircraft loaded. A folded arm can clear the lid at rest and still sit in the path of the front tuck. Try opening the sample from the intended side so the recipient can lift the aircraft by its body without reaching around a moving part.

Pack the remote and spare parts in their own spaces

Fit the remote with its controls in their shipping position. Leave room for any stick or grip that projects. Put the charger and spare parts in separate wells so they cannot travel under the aircraft tray. Measure any wrapped cables with the folded ends in place.

Test the whole kit with the largest accessory fitted. If a card sits on top, check that it does not rest on a remote control or conceal the aircraft grip. Put an instruction sheet where it can be lifted out before the customer handles any of the pieces.

Make a repeatable packing order for the kit

Lay out the parts at the packing station and assemble a sample with the person who will load it. Note which supports go in first. The order matters if a charger sits under a tray and becomes hard to reach after the aircraft is loaded.

Check the finished sample in its outer shipper. Leave enough room to grip the inner carton from the sides. Keep a clear mark for the kit version on a face visible during stock checks. Store a photo of the loaded tray with the proof so changes to the remote or accessories can be checked before the next run.

How to choose custom drone boxes

  1. Measure the folded position

    Include arm shape and camera clearance.

  2. Check batteries separately

    Confirm shipment rules for the actual cells and carrier.

  3. Test the tray with the camera cover installed

    Use the intended cover, propeller holders and any other protection during the fitting. A camera may clear the carton on its own but project farther with its cover fitted. Check underneath the tray and above the camera before lowering the lid. Try removing the aircraft without pulling on the cover.

  4. Compare the remote in both orientations

    Fit the remote with any detached control sticks in their storage position. Rotate the remote to check whether its shape leaves a better pocket for the charger. Keep the space used to lift it clear of the drone and the cable compartment. Mark the final orientation where a packer can see it.

Handling marks such as this-way-up or fragile can be printed next to your logo; see shipping box symbols. See what a box will cost to ship with the dimensional weight calculator.

Custom Drone Boxes pricing, production and delivery

Pricing for custom drone boxes starts at $1.19 per box for 1 box at 9 × 6 × 4 in (229 × 152 × 102 mm), in Corrugated outer, with full-color digital print on the outside. The listed price is per box, in the standard specification, at any listed quantity. Larger runs, other boards and finishes are quoted.

After you send artwork, a digital proof comes back within 24 hours, and design help on the dieline is free. Production of custom drone boxes takes 8–12 business days once the proof is approved. Standard shipping across the US is free and takes 3–6 business days, with tracking.

For production runs in the thousands, see wholesale custom boxes, compare every format on the custom box price list, or request a quote for custom drone boxes.

FAQ

Custom Drone Boxes FAQ

Can I reuse a tray for different drones?

Test the real support points and clearance for each model before sharing a tray.

What is the minimum order for custom drone boxes?

The minimum order is 1 box per size and artwork. The starting price shown is for one box in the standard specification. Choose any whole-box quantity; larger production runs are also available.

What are custom drone boxes made from?

Corrugated outer and Cut and fitted tray. Select strength for the full kit and shipping route. The board is confirmed on your proof before production.

What sizes do custom drone boxes come in?

Every box is cut to your inside dimensions. Popular sizes are 9 × 6 × 4 in (229 × 152 × 102 mm) for compact folded aircraft and 14 × 10 × 6 in (356 × 254 × 152 mm) for aircraft, remote and separated accessories.

Which construction suits custom drone boxes?

The standard build is the reverse tuck end (RTE). Folded aircraft cradle: match the measured outline in transport position. Compartmented kit box is the main alternative.
Copied to clipboard!